No Logo
0
You will find suppliers of steel grating in KSA offering electro-forged steel grating panels, heavy-duty steel gratings, and standard or custom industrial grating solutions. The listed product options cater to industrial applications that require suitable grating panels for project-specific requirements. Contractors, fabricators and procurement teams can contact suppliers to confirm available panel sizes, specifications, load requirements, finishes and pricing before placing an order... Read more...
Filters & Suggestions

8 products found for Steel Grating Suppliers in KSA for Industrial Walkways, Platforms and Heavy-Duty Applications

Steel Grating

Electro Forged Type Grating 25 To 100 mm 3 To 8 mm

  • Finish : Self Color / Hot Dip Galvanized
  • Panel Size : 100 x 6000 / 905 x 6000 mm
  • Load Bar Type : Plain Or Serrated
Steel Grating

Gratings 3 To 5 mm

  • Width : 1000 mm
  • Thickness : 3 - 5 mm
Attieh Steel
International KSA
 
Steel Grating

Steel Grating Painted

  • Material : Carbon Steel and Stainless steel.
  • Surface Type : Standard plain surface, serrated surface.
  • Bearing Bar Type : Flat Bar and I-bar
Steel Grating

Manually Welded Heavy Duty Grating 35 To 150 mm 5 To 12 mm

  • Grade : ASTM A36/ ASTM A1011 And BS EN 10025 S275JR
  • Finish : Self Color or Hot Dip Galvanized
  • Material : Steel
Steel Grating

Steel Grating By Naz Steel

  • Material : Steel
  • Attribute Set : Steel Grating_Grating
Naz Steel
International KSA
 
Steel Grating

Steel Grating, 3 to 10 mm, 25 to 140 mm

  • Finish : Hot-Dip Galvanized
  • Material : Steel
  • Cross Bar Pitch : 50 / 100 mm
Saudi Ekmal
International KSA
 
Steel Grating

Electro Forged Steel Grating Heavy Duty, 3185 mm

  • Weight : 107.84 kg/m2
  • Bearing Bar : 70 x 5 kn/m2
  • Loading Category : Heavy Duty
Saudigrate
Location : Riyadh
Steel Grating

Gratings 6 x 1 m

  • Panel Size : 6 x 1 m
  • Pitch Size : 41 x 100 mm
  • Attribute Set : Steel Grating_Grating

Steel Grating Suppliers in Saudi Arabia – Electro-Forged, Heavy Duty, Hot-Dip Galvanised and Painted Steel Grating


Electro-forged · Manually welded · Hot-dip galvanised · Painted · Serrated

Looking for steel grating suppliers in Saudi Arabia? Saudigrate, Arabian Gratings, Saudi Ekmal, Technor Metals Company LLC, Bakriya Welding Solutions, Naz Steel, Attieh Steel and Faisal Ali Al Qahtani Contracting Establishment are among the suppliers listed in this FYIND KSA category. Compare their available steel grating products, specifications, sizes and suitable applications, along with what to check before placing an order. You can also explore more grating suppliers on FYIND to find options across all 18 grating categories.

Quick answer: For Electro Forged Steel Grating Light Duty, 2893 mm, call Saudigrate (Riyadh, +966 50 196 4303); for Electro Forged Type Grating 25 to 100 mm, 3 to 8 mm, call Arabian Gratings (Jeddah, +966 12 647 3020); for Steel Grating, 3 to 10 mm, 25 to 140 mm, call Saudi Ekmal (Dammam, +966 13 807 1277); for Gratings 6 x 1 m, call Technor Metals Company LLC (Riyadh, +966 11 435 5492); for painted steel grating with flat bar and I-bar, call Bakriya Welding Solutions (Jeddah, +966 12 221 1260); for general steel grating, call Naz Steel (Riyadh, +966 50 218 6958); for 3 to 5 mm gratings, 1,000 mm wide, call Attieh Steel (Jeddah, +966 55 811 9726); for manually welded heavy-duty grating, 35 to 150 mm, call Faisal Ali Al Qahtani Contracting Establishment (Madinah Road, Exit 17, +966 50 898 4051). You can also send an enquiry to each supplier through its fyind profile.

Estimated price: about SAR 75–265 per m².

Who sells steel grating in Saudi Arabia?

Supplier · Product · Card specs

Short answer: Saudigrate, Arabian Gratings, Saudi Ekmal, Technor Metals Company LLC, Bakriya Welding Solutions, Naz Steel, Attieh Steel and Faisal Ali Al Qahtani Contracting Establishment list steel grating on fyind KSA (8 suppliers).

SupplierBusiness typeProduct listedSpecifications on the card
SaudigrateManufacturer (verified)Electro Forged Steel Grating Light Duty, 2893 mmWeight 59.16 kg/m² · Bearing bar 32 x 5 mm · Loading category: light duty · Maximum clear span for pedestrian load 2,893 mm
Arabian GratingsSupplierElectro Forged Type Grating 25 to 100 mm, 3 to 8 mmFinish: self colour or hot-dip galvanised · Panel size 100 x 6000 / 905 x 6000 mm · Load bar: plain or serrated
Saudi EkmalSupplierSteel Grating, 3 to 10 mm, 25 to 140 mmFinish: hot-dip galvanised · Cross bar pitch 50 / 100 mm · Cross bar size 6, 8, 10 mm · Bearing bar pitch 30 to 41 mm
Technor Metals Company LLCManufacturerGratings 6 x 1 mPanel size 6 x 1 m · Pitch 41 x 100 mm · Bearing bar width 20 to 100 mm
Bakriya Welding SolutionsManufacturerSteel Grating PaintedMaterial: carbon steel and stainless steel · Surface: plain or serrated · Bearing bar: flat bar and I-bar
Naz SteelSupplierSteel Grating By Naz SteelMaterial: steel
Attieh SteelStockistGratings 3 To 5 mmWidth 1,000 mm · Thickness 3 to 5 mm
Faisal Ali Al Qahtani Contracting EstablishmentSupplierManually Welded Heavy Duty Grating 35 to 150 mm, 5 to 12 mmGrade: ASTM A36 / ASTM A1011 / BS EN 10025 S275JR · Finish: self colour or hot-dip galvanised

Taken from each supplier's fyind product card. Prices on the cards show 0, so ask for a quote.

Which steel grating supplier should I choose in KSA?

By product · By spec

Short answer: pick Saudigrate or another supplier below by the exact product and specification on its card, not by name.

Choose Saudigrate if you need Electro Forged Steel Grating Light Duty, 2893 mm (Weight 59.16 kg/m², Bearing bar 32 x 5 mm) and want a verified supplier on fyind.

Choose Arabian Gratings if you need Electro Forged Type Grating 25 to 100 mm, 3 to 8 mm (Finish: self colour or hot-dip galvanised, Panel size 100 x 6000 / 905 x 6000 mm).

Choose Saudi Ekmal if you need Steel Grating, 3 to 10 mm, 25 to 140 mm (Finish: hot-dip galvanised, Cross bar pitch 50 / 100 mm).

Choose Technor Metals Company LLC if you need Gratings 6 x 1 m (Panel size 6 x 1 m, Pitch 41 x 100 mm).

Choose Bakriya Welding Solutions if you need Steel Grating Painted (Material: carbon steel and stainless steel, Surface: plain or serrated).

Choose Naz Steel if you need Steel Grating By Naz Steel (Material: steel).

Choose Attieh Steel if you need Gratings 3 To 5 mm (Width 1,000 mm, Thickness 3 to 5 mm).

Choose Faisal Ali Al Qahtani Contracting Establishment if you need Manually Welded Heavy Duty Grating 35 to 150 mm, 5 to 12 mm (Grade: ASTM A36 / ASTM A1011 / BS EN 10025 S275JR, Finish: self colour or hot-dip galvanised).

Where can you find custom steel grating suppliers in KSA?

Short answer: For grating cut or built to your own drawing, start with the manufacturers on FYIND: Saudigrate and Technor Metals Company LLC in Riyadh, and Bakriya Welding Solutions in Jeddah. For deep, hand-welded grating in special sizes, contact Faisal Ali Al Qahtani Contracting Establishment, which lists bearing bars from 35 to 150 mm. Stockists such as Attieh Steel suit jobs where standard panels only need simple cutting. Send your layout drawing, load and finish with the enquiry, so each supplier can confirm what it can make and how long it will take.

SupplierWhat its card showsCityContact
SaudigrateManufacturer (verified). Electro-forged light duty, 32 x 5 mm barRiyadh+966 50 196 4303
Technor Metals Company LLCManufacturer. 6 x 1 m panels, bars 20–100 mm, 41 x 100 mm pitchRiyadh+966 11 435 5492
Bakriya Welding SolutionsManufacturer. Carbon or stainless, flat bar or I-bar, plain or serratedJeddah+966 12 221 1260
Faisal Ali Al Qahtani Contracting EstablishmentManually welded heavy duty, 35–150 mm x 5–12 mmMadinah Road, Exit 17+966 50 898 4051

How it helps: A panel made to your drawing drops straight into the opening, around pipes and columns. That means less cutting and welding on site, fewer bare cut edges that can rust, and a faster install.

Where can you find steel grating suppliers in Riyadh, Jeddah, Dammam and Jubail?

Short answer: Riyadh has Saudigrate, Technor Metals Company LLC and Naz Steel. Jeddah has Arabian Gratings, Bakriya Welding Solutions and Attieh Steel. Dammam has Saudi Ekmal. None of the 8 suppliers lists an address in Jubail, so Jubail buyers usually call Saudi Ekmal in Dammam, about 95 km away, or Saudigrate, whose Google profile is its Al Khobar office. Faisal Ali Al Qahtani lists Madinah Al Munawwarah Road, Exit 17, so confirm the city and delivery area when you call. Always ask whether delivery to site is in the price.

CitySupplierAreaContact
RiyadhSaudigrateAl Malaz+966 50 196 4303
RiyadhTechnor Metals Company LLCAl Rawabi+966 11 435 5492
RiyadhNaz SteelIndustrial Area+966 50 218 6958
JeddahArabian GratingsOthman Ibn Affan Road+966 12 647 3020
JeddahBakriya Welding SolutionsIndustrial Area+966 12 221 1260
JeddahAttieh SteelAl Hamra+966 55 811 9726
DammamSaudi EkmalKing Fahd Road, Ibn Khaldun+966 13 807 1277
JubailServed by Saudi Ekmal (Dammam) or Saudigrate (Al Khobar office)No local listing+966 13 807 1277
Confirm when callingFaisal Ali Al Qahtani Contracting EstablishmentMadinah Al Munawwarah Road, Exit 17+966 50 898 4051

How it helps: Buying from a supplier in or near your city cuts truck costs and delivery time, and makes it easier to collect a missing panel or visit the factory to check the work.

What are the steel grating standard sizes available in KSA?

Panel size · Bar size · Pitch

Short answer: The most common steel grating panel in Saudi Arabia is 1 m wide and 6 m long. Bearing bars are usually 25–100 mm high and 3–10 mm thick, spaced about 30–41 mm apart, with cross bars every 50 or 100 mm. Heavy-duty grating goes up to 150 mm high and 12 mm thick. Suppliers can also cut panels to your exact size, which costs a bit more. Pick the size based on the load (people, forklifts or trucks) and the distance between supports, and ask the supplier to check the span.

What do the size numbers mean?

A grating size such as "32 x 5" or "41 x 100" can look confusing. Here is what each part tells you:

  • Bearing bar height x thickness (for example 32 x 5 mm): the main bars that carry the weight. Taller and thicker bars carry more load and span further.
  • Bearing bar pitch (for example 30 or 41 mm): the gap from the centre of one bar to the next. A smaller gap feels firmer underfoot and stops small tools falling through.
  • Cross bar pitch (for example 50 or 100 mm): how far apart the twisted cross bars are. 100 mm is standard; 50 mm gives a tighter mesh.
  • Panel size (for example 1 x 6 m): the full sheet before cutting. Panels are cut to fit platforms, stair treads and trench covers.

Which sizes do KSA suppliers list?

SupplierBearing bar sizePanel / pitchContact
Saudigrate32 x 5 mm (light duty, 59.16 kg/m²)Clear span up to 2,893 mm for foot traffic+966 50 196 4303
Arabian Gratings25–100 mm high, 3–8 mm thick6,000 mm long panels (905 mm wide option); plain or serrated+966 12 647 3020
Saudi Ekmal25–140 mm high, 3–10 mm thickBar pitch 30–41 mm; cross bar 6, 8 or 10 mm at 50 / 100 mm+966 13 807 1277
Technor Metals Company LLC20–100 mm wide bars6 x 1 m panel; pitch 41 x 100 mm+966 11 435 5492
Bakriya Welding SolutionsFlat bar or I-barMade to order; plain or serrated+966 12 221 1260
Naz SteelAsk for sizesGeneral steel grating+966 50 218 6958
Attieh Steel3–5 mm thick1,000 mm wide+966 55 811 9726
Faisal Ali Al Qahtani Contracting Establishment35–150 mm high, 5–12 mm thick (heavy duty)Manually welded; ASTM A36 / S275JR steel+966 50 898 4051

Check before you order: Ask for the span between supports and the pedestrian load the grating panel is rated for. If the walkway is exposed to oil or water, consider serrated bars for better grip. Have your engineer confirm the panel specifications and suitability for your site. You can also explore different grating types and compare suppliers on the FYIND grating hub.

Which size fits which job?

UseTypical bearing barWho lists it
Walkways, platforms, stair treads25 x 3 mm to 32 x 5 mmSaudigrate, Arabian Gratings, Attieh Steel
Plant floors, trench covers with carts40 x 5 mm to 60 x 8 mmSaudi Ekmal, Technor, Arabian Gratings
Forklift, truck and loading areas75 x 10 mm to 150 x 12 mmFaisal Ali Al Qahtani, Saudi Ekmal

Sizes are taken from each supplier's FYIND product card. The job guide is a general rule of thumb, so ask the supplier to confirm the load table and span for your site.

How do you select custom-fabricated or cut-to-size steel grating layouts?

Short answer: Start with a site drawing, not a panel list. Measure each opening, mark the supports and pipes, and decide which way the bearing bars must run (always across the supports). Then split the area into panels light enough to lift by hand, with cut-outs for pipes and banding on every cut edge. Standard 6 x 1 m panels cost the least; cut-to-size pieces cost more but fit first time. Ask manufacturers such as Saudigrate, Technor or Bakriya to quote from your drawing.

  1. Measure: record every opening, the support positions and any pipes, columns or drains.
  2. Set the bar direction: bearing bars must span from support to support; check the span against the supplier's load table.
  3. Size the panels: a 1 x 1 m piece of 32 x 5 mm grating weighs about 59 kg, so keep panels to a weight two people can lift.
  4. Add cut-outs and banding: weld a flat bar round every cut-out and add kick plates on open edges.
  5. Leave gaps: allow a small gap (about 5–10 mm) between panels so they drop in easily.
  6. Galvanise after cutting: ask for panels to be cut first and galvanised after, so no bare edges are left.
OptionCostFitBest for
Standard panels (6 x 1 m)LowestCut on site; needs touch-up of cut edgesLarge, simple floor areas
Cut-to-size to drawingHigherFits first time, edges banded and galvanisedPlatforms with pipes, odd shapes, stair treads

How it helps: A clear layout drawing gives every supplier the same brief, so quotes compare like for like and panels arrive ready to fit, without wasted steel or rushed cutting on site.

What types of steel grating are listed in KSA?

Electro-forged · Welded heavy duty · Painted

Saudigrate and Arabian Gratings list electro-forged steel grating in KSA, Faisal Ali Al Qahtani Contracting Establishment lists manually welded heavy-duty grating, and Bakriya Welding Solutions lists painted steel grating with flat bars and I-bars.

TypeWhat it isListed byChoose it if
Electro-forgedCross bars fused into bearing bars by machine, in standard panelsSaudigrate, Arabian GratingsWalkways and platforms with standard spans
Manually welded heavy dutyDeep bearing bars welded by hand, often to drawingFaisal Ali Al Qahtani Contracting Establishment, SaudigrateWide trenches, yards and vehicle areas
PaintedSteel grating with a paint coatingBakriya Welding SolutionsIndoor areas where the coating can be maintained
Standard panelsReady-cut panels from stockTechnor Metals Company LLC, Attieh Steel, Naz Steel, Saudi EkmalQuick delivery of common sizes

What are the differences between carbon steel, mild steel and stainless steel gratings?

Short answer: Mild steel is a low-carbon type of carbon steel, so for grating the two names usually mean the same thing: strong, easy to weld and the lowest-cost option. Common grades are ASTM A36 and BS EN 10025 S275JR, both listed by Faisal Ali Al Qahtani. It must be galvanised or painted, or it will rust. Stainless steel (304 or 316) contains chromium, so it resists rust without a coating, but it costs roughly two to four times more. Bakriya Welding Solutions lists both carbon steel and stainless steel grating.

PointCarbon steelMild steelStainless steel
What it isIron with carbon; the general familyCarbon steel with low carbon (up to about 0.25%)Steel with at least 10.5% chromium (304 or 316)
Typical gradeASTM A1011, A36ASTM A36, S275JRAISI 304 or 316
Strength (yield)About 250–275 MPaAbout 250–275 MPaAbout 205–215 MPa (304/316)
Rust protectionNeeds galvanising or paintNeeds galvanising or paintBuilt in, no coating needed
Estimated priceAbout SAR 45–265 per m² (by finish)About SAR 45–265 per m² (by finish)About SAR 170–600 per m²
Best forPlants, walkways, trenchesSame as carbon steelFood plants, coastal and chemical areas
Who lists itFaisal Ali Al Qahtani, BakriyaFaisal Ali Al QahtaniBakriya (+966 12 221 1260)

Need stainless only? See the stainless steel grating category. Prices are the same estimates used in the price section below.

What are press-locked and electro-forged steel grating panels?

Short answer: Both are ways of joining the cross bars to the bearing bars. Electro-forged (also called pressure-welded) grating is made by a machine that fuses the cross bars into the bearing bars using heat and pressure, giving a one-piece panel with strong joints. Saudigrate and Arabian Gratings list it. Press-locked grating is made cold: the bars are slotted and pressed together without welding, giving a flat, neat surface that is often used for screens, ceilings and facades. None of the 8 suppliers lists press-locked grating on its card, so ask before you specify it.

PointElectro-forgedPress-locked
How it is madeCross bars fused into bearing bars with heat and pressureSlotted bars pressed together cold, no welding
Cross barUsually a twisted square barFlat bar, flush with the top
LookIndustrialNeat, even mesh
StrengthVery strong joints; good for loads and vibrationGood for foot traffic; joints rely on the press fit
Typical useWalkways, platforms, trench covers, plant floorsArchitectural screens, sunshades, ceilings, light walkways
KSA suppliers on FYINDSaudigrate (+966 50 196 4303), Arabian Gratings (+966 12 647 3020)Not listed; ask the manufacturers

How it helps: Picking the right panel type means you do not pay for a decorative finish on a plant floor, or end up with weak joints where heavy carts and vibration would loosen them.

What specifications do KSA steel grating suppliers list?

Bar size · Pitch · Panel size · Standards

Saudigrate, Saudi Ekmal, Technor Metals Company LLC and Arabian Gratings publish these figures on their fyind cards for steel grating in KSA:

SpecificationWhat it meansValues on fyind cards
Bearing barThe load-carrying bar, height x thickness32 x 5 mm (Saudigrate); 25–140 mm x 3–10 mm (Saudi Ekmal); 25–100 mm x 3–8 mm (Arabian Gratings); 35–150 mm x 5–12 mm (Faisal Ali Al Qahtani)
PitchSpacing of bearing bars x cross bars41 x 100 mm (Technor); bearing bar 30–41 mm, cross bar 50 / 100 mm (Saudi Ekmal)
Panel sizeStandard panel dimensions6 x 1 m (Technor); 100 x 6000 / 905 x 6000 mm (Arabian Gratings); 1,000 mm wide (Attieh Steel)
Maximum spanClear span for a stated load2,893 mm for pedestrian load (Saudigrate light duty)
Steel gradeMaterial standardASTM A36 / ASTM A1011 / BS EN 10025 S275JR (Faisal Ali Al Qahtani)

Should steel grating be galvanised, painted or self colour?

Hot-dip galvanised · Painted · Self colour

Saudi Ekmal lists hot-dip galvanised steel grating in KSA, Arabian Gratings and Faisal Ali Al Qahtani Contracting Establishment offer self colour or hot-dip galvanised, and Bakriya Welding Solutions lists painted grating.

FinishChoose it ifWatch out for
Hot-dip galvanisedOutdoor, coastal and plant areasCut edges need zinc-rich touch-up
PaintedIndoor areas with regular maintenancePaint wears on walkways
Self colourGrating will be coated on site or kept dry indoorsRusts quickly outdoors

Where can you find anti-slip and weather-resistant steel grating solutions?

Short answer: For grip, ask for serrated grating, where the top of each bearing bar is notched so shoes and tyres hold better on oil, water or sand. Arabian Gratings and Bakriya Welding Solutions list plain or serrated bars. For weather resistance, choose hot-dip galvanised steel from Saudi Ekmal, Arabian Gratings or Faisal Ali Al Qahtani, or stainless steel from Bakriya for the harshest sites. Combining serrated bars with hot-dip galvanising gives the best mix of grip and long life outdoors.

Serrations slightly reduce the load a bar can carry, so ask the supplier for the load table of the serrated version.

How it helps: Serrated bars cut slip accidents on wet, oily or sandy floors, and a galvanised or stainless finish stands up to sun, rain and salt air, so the grating lasts longer between replacements.

Which steel grating offers better corrosion resistance for outdoor applications?

Short answer: For most outdoor sites in KSA, hot-dip galvanised steel gives the best value. The zinc layer, typically around 70–85 microns under ISO 1461, protects the steel for many years inland. Near the coast at Jeddah, Dammam or Jubail, 316 stainless steel lasts longest but costs the most, while 304 stainless is fine inland. Painted and self-colour grating need regular repainting outdoors. Saudi Ekmal, Arabian Gratings and Faisal Ali Al Qahtani offer hot-dip galvanised grating, and Bakriya Welding Solutions lists stainless.

FinishInland (e.g. Riyadh)Coastal (Jeddah, Dammam, Jubail)Estimated priceWho lists it
Hot-dip galvanisedVery goodGood; touch up cut edgesAbout SAR 75–265 per m²Saudi Ekmal, Arabian Gratings, Faisal Ali Al Qahtani
Stainless 316ExcellentExcellentTop of SAR 170–600 per m²Bakriya (ask for grade)
Stainless 304Very goodFair; may show brown stainingAbout SAR 170–600 per m²Bakriya
PaintedFair; repaint oftenPoorAbout SAR 45–130 per m²Bakriya
Self colour (bare)PoorVery poorFrom about SAR 45 per m²Arabian Gratings, Faisal Ali Al Qahtani

See how Saudi heat, sand and coastal air affect steel grating for more site tips.

How it helps: The right finish stops rust before it starts, so the grating stays safe to walk on and you avoid the cost of early replacement or yearly repainting.

Who supplies steel grating for walkways and platforms in KSA?

Pedestrian walkways · Maintenance platforms · Rooftops · Catwalks

Short answer: Saudigrate lists Electro Forged Steel Grating Light Duty, 2893 mm on fyind KSA, which is the kind of steel grating used for walkways and platforms.

SupplierProduct they listCard specifications
SaudigrateElectro Forged Steel Grating Light Duty, 2893 mmWeight 59.16 kg/m² · Bearing bar 32 x 5 mm · Loading category: light duty · Maximum clear span for pedestrian load 2,893 mm
Technor Metals Company LLCGratings 6 x 1 mPanel size 6 x 1 m · Pitch 41 x 100 mm · Bearing bar width 20 to 100 mm

Choose it if: Choose steel for general plant walkways, aluminium where panels are lifted often, and FRP where the walkway sits over chemicals or water.

Check before you order: Ask for the span between supports and the pedestrian load the panel is rated for. Serrated bars give better grip on oily or wet walkways. This is general guidance; your engineer should confirm it for the site. See all suppliers for this job on the grating hub.

Check before you order:Ask for the span between supports and the pedestrian load the panel is rated for. Serrated bars give better grip on oily or wet walkways. This is general guidance; your engineer should confirm it for the site.. You can also explore different grating types and compare suppliers on the FYIND grating hub.

Which steel grating is suitable for steel floors, platforms and stair treads?

Short answer: For steel floors and platforms with foot traffic, a light-duty electro-forged panel such as Saudigrate's 32 x 5 mm grating (59.16 kg/m², spans up to 2,893 mm for pedestrian load) is the usual choice. Technor Metals Company LLC lists standard 6 x 1 m panels and Attieh Steel lists 1,000 mm-wide gratings. For stair treads, ask for the same grating cut to the tread width, with end plates for bolting to the stringers and an anti-slip nosing on the front edge. Choose serrated bars from Arabian Gratings or Bakriya where floors get oily or wet.

UseSuggested gratingTypical bar and pitchWho to call
Steel floors and mezzaninesElectro-forged, standard 6 x 1 m panels30 x 3 to 32 x 5 mm; 30–41 x 100 mmTechnor Metals Company LLC +966 11 435 5492
Maintenance and rooftop platformsElectro-forged, hot-dip galvanised32 x 5 mm; span up to 2,893 mm (foot traffic)Saudigrate +966 50 196 4303
Stair treadsGrating cut to tread width, with end plates and nosing25 x 3 to 32 x 5 mm, serratedArabian Gratings +966 12 647 3020
Oily or wet floorsSerrated, painted or stainlessFlat bar or I-barBakriya Welding Solutions +966 12 221 1260

Ready-made treads are also listed in the grating tread category.

How it helps: Open grating lets light, air and water pass through, so floors stay dry and bright, and it weighs far less than a solid plate. Nosings and serrated bars help stop slips on stairs.

Who supplies steel grating for oil, gas and industrial plants in KSA?

Hot-dip galvanised · Plant floors · Pipe racks · Eastern Province

Short answer: Saudi Ekmal lists Steel Grating, 3 to 10 mm, 25 to 140 mm on fyind KSA, which is the kind of steel grating used for oil, gas and industrial plants.

SupplierProduct they listCard specifications
Saudi EkmalSteel Grating, 3 to 10 mm, 25 to 140 mmFinish: hot-dip galvanised · Cross bar pitch 50 / 100 mm · Cross bar size 6, 8, 10 mm · Bearing bar pitch 30 to 41 mm
Arabian GratingsElectro Forged Type Grating 25 to 100 mm, 3 to 8 mmFinish: self colour or hot-dip galvanised · Panel size 100 x 6000 / 905 x 6000 mm · Load bar: plain or serrated
Faisal Ali Al Qahtani Contracting EstablishmentManually Welded Heavy Duty Grating 35 to 150 mm, 5 to 12 mmGrade: ASTM A36 / ASTM A1011 / BS EN 10025 S275JR · Finish: self colour or hot-dip galvanised
Bakriya Welding SolutionsSteel Grating PaintedMaterial: carbon steel and stainless steel · Surface: plain or serrated · Bearing bar: flat bar and I-bar

Choose it if: Choose hot-dip galvanised grating for outdoor and coastal plants, and painted grating only where the coating can be maintained.

Check before you order: Your client or main contractor may require an approved-vendor list for plant work, so check before you order. This is general guidance; your engineer should confirm it for the site. See all suppliers for this job on the grating hub.

Check before you order: Your client or main contractor may require an approved-vendor list for plant work, so check before you order. This is general guidance; your engineer should confirm it for the site. You can also explore different grating types and compare suppliers on the FYIND grating hub.

Who supplies steel grating for roads and heavy traffic in KSA?

40 ton · Roads · Ports · Loading bays

Short answer: Faisal Ali Al Qahtani Contracting Establishment lists Manually Welded Heavy Duty Grating 35 to 150 mm, 5 to 12 mm on fyind KSA, which is the kind of steel grating used for roads and heavy traffic.

SupplierProduct they listCard specifications
Faisal Ali Al Qahtani Contracting EstablishmentManually Welded Heavy Duty Grating 35 to 150 mm, 5 to 12 mmGrade: ASTM A36 / ASTM A1011 / BS EN 10025 S275JR · Finish: self colour or hot-dip galvanised

Choose it if: Choose ductile iron for road gullies, and deep welded steel grating for wide trenches in yards and ports.

Check before you order: Give the supplier the axle or wheel load, the clear span and the traffic type. A 40-ton rating on one product does not mean every size carries the same load. This is general guidance; your engineer should confirm it for the site. See all suppliers for this job on the grating hub.

Check before you order: Give the supplier the axle or wheel load, the clear span and the traffic type. A 40-ton rating on one product does not mean every size carries the same load. This is general guidance; your engineer should confirm it for the site. You can also explore different grating types and compare suppliers on the FYIND grating hub.

Where can you buy heavy-duty galvanized steel grating in KSA?

Short answer: Faisal Ali Al Qahtani Contracting Establishment lists manually welded heavy-duty grating with bearing bars 35–150 mm high and 5–12 mm thick, in self colour or hot-dip galvanised. Saudi Ekmal lists hot-dip galvanised grating up to 140 mm high and 10 mm thick, and Arabian Gratings offers galvanised electro-forged grating up to 100 x 8 mm. Heavy-duty galvanised grating is estimated at about SAR 300–1,125+ per m², depending on bar depth and quantity. Give the supplier the wheel load, the span and the traffic type so the bar is matched to the load.

SupplierLargest bar on cardFinishEstimated priceContact
Faisal Ali Al Qahtani Contracting Establishment150 x 12 mm, manually weldedSelf colour or hot-dip galvanisedAbout SAR 300–1,125+ per m²+966 50 898 4051
Saudi Ekmal140 x 10 mmHot-dip galvanisedFrom about SAR 75 per m²; deeper bars cost more+966 13 807 1277
Arabian Gratings100 x 8 mm, electro-forgedSelf colour or hot-dip galvanisedFrom about SAR 75 per m² (galvanised); deeper bars cost more+966 12 647 3020

How it helps: Deep bars carry forklifts and trucks across wide trenches without bending, and the zinc coat protects the steel in yards, ports and plants without repainting. Welded joints also stay tight under vibration from heavy traffic.

How do Saudi heat, sand and coastal air affect steel grating?

Heat · Sand · Coast · Approvals

Short answer: Saudigrate and the other suppliers list steel grating for sites across KSA, where heat, sand and salt decide how long it lasts.

KSA tip – Heat: Steel and stainless grating in direct summer sun gets hot enough to burn bare hands; FRP can soften or fade with UV if the resin isn't rated for it.

KSA tip – Sand and shamal winds: Blown sand fills grating openings and the channels beneath. Plan lift-out panels or cleaning access, and clear drains after storms.

KSA tip – Coastal air: At Jeddah, Dammam, Al Khobar and Jubail, salt air attacks bare and painted steel. Hot-dip galvanised steel, 316 stainless or FRP last longer.

KSA tip – Approvals: Plant and oil and gas clients may require an approved vendor; fire escapes and stairs may need Civil Defense sign-off. Check before ordering.

KSA tip – Summer midday work ban: Outdoor work is restricted around midday in summer, usually from 15 June to 15 September. Check each year's dates and plan installation for mornings.

How is steel grating installed?

Supports · Fixing · Cut edges

Short answer: Saudigrate supplies steel grating in KSA; installation is normally done by your fabricator or contractor along these lines.

  1. Check the supports or frame are level and at the right spacing for the panel span.
  2. Set out panels so bearing bars run across the supports, never along them.
  3. Fix every panel with the clips or bolts the maker specifies; loose panels are a fall hazard.
  4. Seal cut edges: zinc-rich paint on galvanised steel, resin on FRP.
  5. Check panels sit flat and do not rock before opening the area.

Safety: barrier off any open grating area during installation. This is general guidance; a qualified engineer should confirm loads, spans and fixings.

What can I use instead of steel grating?

Options · Choose it if

Short answer: Saudigrate can quote steel grating, but these alternatives sometimes suit KSA sites better.

AlternativeChoose it ifWatch out for
Stainless steel gratingHygiene or appearance mattersHigher price
FRP gratingChemical or electrical areasCheck load and fire rating
Chequered plateA solid floor is neededHolds water and sand

How do I maintain steel grating and fix common problems?

Symptom · Cause · Fix

Short answer: Saudigrate supplies steel grating in KSA, and most problems trace back to fixing, cleaning or corrosion.

SymptomLikely causeFix
Panels rock or rattleMissing clips or uneven supportsRefit clips; pack or level supports
Rust on steel gratingGalvanising damaged at cuts or weldsClean and apply zinc-rich paint
Openings blocked with sandWind-blown sand and debrisLift panels and clean; plan regular cleaning
Bars bentLoad above rating or dropped equipmentReplace panel; check the load class
FRP surface fading or fibres showingUV exposureAsk the supplier about UV coating or replacement

Have a technician confirm the cause before buying replacement panels.

What should I check before ordering steel grating?

Checklist · Mistakes

Short answer: before you contact Saudigrate or another supplier for steel grating in KSA, have these answers ready.

  • Material and grade or finish
  • Bar size, pitch and surface (plain or serrated)
  • Load: pedestrian or vehicle, and the span between supports
  • Panel sizes or area in m², and whether panels are cut to drawing
  • Fixing clips, nosing or frames needed
  • Delivery city, site and date

What mistakes do buyers make?

MistakeWhat happensDo this instead
Comparing quotes with different bar sizesThe cheapest quote is a lighter gratingSend every supplier the same bar size, pitch and finish
Asking for a price without the spanThe quote is for the wrong bar depthGive the span between supports
Ignoring cut-edge protectionRust starts at cut edgesAsk for touch-up or factory cutting

How much does steel grating cost in Saudi Arabia?

SAR · Estimates · Quotes

Short answer: Standard hot-dip galvanised steel grating costs about SAR 75–265 per m². Plain or painted grating starts lower, from about SAR 45 per m², while stainless steel and heavy-duty welded grating cost more. The suppliers below quote on request, so call for an exact price.

SupplierItem listedEstimated priceContact
SaudigrateElectro Forged Steel Grating Light Duty, 32 x 5 mm barAbout SAR 75–265 per m²+966 50 196 4303
Arabian GratingsElectro Forged Type Grating 25–100 mm, 3–8 mm (self colour or galvanised)About SAR 45–265 per m²+966 12 647 3020
Saudi EkmalHot-dip galvanised Steel Grating 3–10 mm, 25–140 mmAbout SAR 75–265 per m²+966 13 807 1277
Technor Metals Company LLCGratings 6 x 1 m, 41 x 100 mm pitchAbout SAR 75–265 per m²+966 11 435 5492
Bakriya Welding SolutionsPainted carbon steel or stainless steel gratingAbout SAR 45–130 per m² (painted); SAR 170–600 per m² (stainless)+966 12 221 1260
Naz SteelGeneral steel gratingAbout SAR 45–265 per m²+966 50 218 6958
Attieh SteelGratings 3–5 mm, 1,000 mm wideAbout SAR 45–265 per m²+966 55 811 9726
Faisal Ali Al Qahtani Contracting EstablishmentManually Welded Heavy Duty Grating 35–150 mm, 5–12 mmAbout SAR 300–1,125+ per m²+966 50 898 4051

Prices are estimates for Nov 2026 and change with steel prices, size, finish and quantity. Ask for a written quote per m² or per panel.

What does a real steel grating job look like?

Example job · Walkway · Riyadh

Short answer: A typical job is a factory walkway built from light-duty electro forged grating. Below is a worked example that uses the specs of Saudigrate's 32 x 5 mm light-duty panel. It shows how to work out size, weight, support spacing and budget before you call a supplier. The numbers are estimates for planning, not a finished project. Your own site, load and finish will change the final quote, so always ask the supplier to confirm the panel and span for your job.

Site: A factory mezzanine walkway in Riyadh, 20 m long and 1 m wide (20 m²), used by staff on foot only.

Problem: The old chequered plate floor held dust and spilled oil, so it became slippery, and light from the floor below could not pass through. The owner wanted an open, non-slip floor that drains and needs little upkeep.

Grating chosen and why: Electro Forged Steel Grating Light Duty from Saudigrate, with a 32 x 5 mm bearing bar and a weight of 59.16 kg/m². It is rated for pedestrian load with a clear span of up to 2,893 mm, so supports placed every 2.5 m leave a safety margin. Hot-dip galvanising is a sensible finish for an indoor area with oil and cleaning water.

Result: About 1,183 kg of grating in total (20 m² x 59.16 kg/m²), at an estimated SAR 1,500–5,300 for the material (SAR 75–265 per m²) before cutting, fixing clips and delivery. Call +966 50 196 4303 to get a written quote for your own size.

Who offers steel grating in KSA? Supplier by supplier

Supplier cards

Short answer: Saudigrate (Riyadh), Arabian Gratings (Jeddah), Saudi Ekmal (Dammam), Technor Metals Company LLC (Riyadh), Bakriya Welding Solutions (Jeddah), Naz Steel (Riyadh), Attieh Steel (Jeddah) and Faisal Ali Al Qahtani Contracting Establishment are listed for steel grating on fyind KSA. Each card shows the address, phone, Google rating where available, a listed product with its specifications and when to call.

Who offers steel grating in KSA? Saudigrate

Saudigrate is the manufacturer to contact for steel grating on fyind KSA.

  • Business type: Manufacturer · Verified supplier on fyind
  • Address: Office No. 9, 3rd Floor, Talha Bin Malik Street, Salah Ad Din Al Ayyubi Road, Al Malaz, Riyadh, Saudi Arabia
  • Contact: +966 50 196 4303 · Send Enquiry on the fyind profile
  • Opening hours: Sunday to Thursday 8 am–6 pm (Al Khobar office on Google)
  • Google rating: 5.0 ★ (7 reviews) · Read reviews and get directions

“Best gratings manufacturer in gulf, orders will be delivered on time, quick response for customer” – Google reviewer

Electro Forged Steel Grating Light Duty, 2893 mm

Weight 59.16 kg/m² · Bearing bar 32 x 5 mm · Loading category: light duty · Maximum clear span for pedestrian load 2,893 mm

When should you call Saudigrate?

The situation: A plant needs steel walkway grating, stainless top notch channels and FRP panels for one project, and wants a single manufacturer to quote all three.

Questions to ask:

  • Is the grating made in your own factory, and what is the lead time?
  • Can you cut and band panels to our layout drawing?
  • Can you send test or mill certificates with the quote?

View the Saudigrate profile and steel grating products on fyind · Call +966 50 196 4303

Who offers steel grating in KSA? Arabian Gratings

Arabian Gratings is the supplier to contact for steel grating on fyind KSA.

“The material quality of the gratings was excellent, with precise fabrication and timely delivery.” – Google reviewer

Electro Forged Type Grating 25 to 100 mm, 3 to 8 mm

Finish: self colour or hot-dip galvanised · Panel size 100 x 6000 / 905 x 6000 mm · Load bar: plain or serrated

When should you call Arabian Gratings?

The situation: A contractor's drawing calls for hot-dip galvanised electro-forged grating on the steel areas and 25 mm pultruded FRP over a chemical sump.

Questions to ask:

  • Is the grating in stock in KSA or made to order?
  • Which sizes and finishes can you deliver this month?
  • Can you cut panels to our drawing, or only sell standard sizes?

View the Arabian Gratings profile and steel grating products on fyind · Call +966 12 647 3020

Who offers steel grating in KSA? Saudi Ekmal

Saudi Ekmal is the supplier to contact for steel grating on fyind KSA.

“SAUDI EKMAL approved vendor for Saudi aramco, Sabic, Maaden, Yasref, Hyundai and samsung” – Google reviewer

Steel Grating, 3 to 10 mm, 25 to 140 mm

Finish: hot-dip galvanised · Cross bar pitch 50 / 100 mm · Cross bar size 6, 8, 10 mm · Bearing bar pitch 30 to 41 mm

When should you call Saudi Ekmal?

The situation: An outdoor pipe rack needs hot-dip galvanised grating with a 30 to 41 mm bearing bar pitch.

Questions to ask:

  • Is the grating in stock in KSA or made to order?
  • Which sizes and finishes can you deliver this month?
  • Can you supply to Aramco or SABIC project specifications?

View the Saudi Ekmal profile and steel grating products on fyind · Call +966 13 807 1277

Who offers steel grating in KSA? Technor Metals Company LLC

Technor Metals Company LLC is the manufacturer to contact for steel grating on fyind KSA.

Gratings 6 x 1 m

Panel size 6 x 1 m · Pitch 41 x 100 mm · Bearing bar width 20 to 100 mm

When should you call Technor Metals Company LLC?

The situation: A warehouse mezzanine needs standard 6 x 1 m steel grating panels at a 41 x 100 mm pitch.

Questions to ask:

  • Is the grating made in your own factory, and what is the lead time?
  • Can you cut and band panels to our layout drawing?
  • Can you send test or mill certificates with the quote?

View the Technor Metals Company LLC profile and steel grating products on fyind · Call +966 11 435 5492

Who offers steel grating in KSA? Bakriya Welding Solutions

Bakriya Welding Solutions is the manufacturer to contact for steel grating on fyind KSA.

Steel Grating Painted

Material: carbon steel and stainless steel · Surface: plain or serrated · Bearing bar: flat bar and I-bar

When should you call Bakriya Welding Solutions?

The situation: A workshop wants painted steel grating with serrated I-bars for an oily floor.

Questions to ask:

  • Is the grating made in your own factory, and what is the lead time?
  • Can you cut and band panels to our layout drawing?
  • Can you send test or mill certificates with the quote?

View the Bakriya Welding Solutions profile and steel grating products on fyind · Call +966 12 221 1260

Who offers steel grating in KSA? Naz Steel

Naz Steel is the supplier to contact for steel grating on fyind KSA.

  • Business type: Supplier
  • Address: Industrial Area, Riyadh, Saudi Arabia
  • Contact: +966 50 218 6958 · Send Enquiry on the fyind profile
  • Opening hours: Saturday to Thursday 8 am–5 pm; Friday closed (listed on Google as Naz Industries, Al Mashael, Exit 18)
  • Google rating: 5.0 ★ (2 reviews) · Read reviews and get directions

Steel Grating By Naz Steel

Material: steel

When should you call Naz Steel?

The situation: A buyer needs general steel grating and wants a second quote to compare.

Questions to ask:

  • Is the grating in stock in KSA or made to order?
  • Which sizes and finishes can you deliver this month?
  • Can you cut panels to our drawing, or only sell standard sizes?

View the Naz Steel profile and steel grating products on fyind · Call +966 50 218 6958

Who offers steel grating in KSA? Attieh Steel

Attieh Steel is the stockist to contact for steel grating on fyind KSA.

  • Business type: Stockist
  • Address: Al Andalus Street, Al Hamra, Jeddah, Saudi Arabia
  • Contact: +966 55 811 9726 · Send Enquiry on the fyind profile
  • Opening hours: Saturday to Thursday 9 am–5 pm; Friday closed (Attieh Group HQ on Google)
  • Google rating: 4.3 ★ (6 reviews) · Read reviews and get directions

Gratings 3 To 5 mm

Width 1,000 mm · Thickness 3 to 5 mm

When should you call Attieh Steel?

The situation: A maintenance team needs 3 to 5 mm steel gratings, 1,000 mm wide, from stock this week.

Questions to ask:

  • Which panel sizes are in stock today?
  • Can you cut panels to size before delivery?
  • Do you deliver to site, and to which cities?

View the Attieh Steel profile and steel grating products on fyind · Call +966 55 811 9726

Who offers steel grating in KSA? Faisal Ali Al Qahtani Contracting Establishment

Faisal Ali Al Qahtani Contracting Establishment is the supplier to contact for steel grating on fyind KSA.

Manually Welded Heavy Duty Grating 35 to 150 mm, 5 to 12 mm

Grade: ASTM A36 / ASTM A1011 / BS EN 10025 S275JR · Finish: self colour or hot-dip galvanised

When should you call Faisal Ali Al Qahtani Contracting Establishment?

The situation: A project needs stainless pass thru gratings for finished floors and heavy-duty welded steel grating for a service yard.

Questions to ask:

  • Is the grating in stock in KSA or made to order?
  • Which sizes and finishes can you deliver this month?
  • Can you cut panels to our drawing, or only sell standard sizes?

View the Faisal Ali Al Qahtani Contracting Establishment profile and steel grating products on fyind · Call +966 50 898 4051

What do people ask about steel grating in KSA?

FAQ

What is electro-forged grating?

Grating made by fusing cross bars into bearing bars by machine. It comes in standard panels and is used for most walkways and platforms.

Is hot-dip galvanised grating better than painted?

For outdoor and coastal sites, usually yes, because the zinc coating protects the steel without regular repainting. Painted grating suits indoor areas.

What does pitch mean on steel grating?

Pitch is the centre-to-centre spacing of the bars, for example 41 x 100 mm: bearing bars every 41 mm and cross bars every 100 mm.

What is serrated grating?

Grating with notched bearing bars on top for extra grip on oily or wet floors. Arabian Gratings and Bakriya Welding Solutions list plain or serrated options.

What panel sizes are available?

Cards on fyind list 6 x 1 m panels (Technor Metals Company LLC) and 100 x 6000 or 905 x 6000 mm panels (Arabian Gratings). Most suppliers also cut to drawing.

Which companies list steel grating on fyind KSA?

Saudigrate, Arabian Gratings, Saudi Ekmal, Technor Metals Company LLC, Bakriya Welding Solutions, Naz Steel, Attieh Steel and Faisal Ali Al Qahtani Contracting Establishment list steel grating on fyind KSA.

Do steel grating suppliers publish prices?

No. The fyind product cards show a price of 0, so send an enquiry with your specification to get a quote.

How do I contact a steel grating supplier?

Use the Send Enquiry button on the supplier's fyind profile, for example Saudigrate, and attach your drawing or sizes.

Which other grating categories should I explore?

Grating types · Hub

Apart from steel grating, you can explore other grating categories listed by Saudigrate and other suppliers in KSA. Visit the grating hub to compare all 18 grating categories and find options for your project.

Other grating categories

Grating for… guides on the hub

Popular Categories