No Logo
0
You will find suppliers of fiberglass grating in KSA offering moulded and pultruded FRP/GRP panels for industrial floors, walkways, platforms, staircases and trench covers. The five listed suppliers are Saudigrate and Arabian Gratings in Jeddah, Busubait Fiberglass and Spark Fiber Glass in Dammam, and Al Noor International in Al Kharj. Their product ranges include 38 mm I-6015 and 25 mm I-4010 pultruded panels, moulded polyester grating, FRP stairs and custom platforms. These products are suitable for oil and gas facilities, chemical plants, water treatment and desalination plants, wastewater facilities and coastal industrial sites. The indicative factory price for 38 mm moulded polyester grating is around SAR 170–245 per m², before freight and VAT. Contractors, EPC companies and facility managers can compare suppliers and request quotations based on panel dimensions, support spans, load requirements, resin type and site conditions... Read more...
Filters & Suggestions

5 products found for Moulded and Pultruded Fiberglass Gratings for Oil & Gas, Water Treatment and Chemical Processing Facilities

Fiberglass Grating

Pultruded Grating I 4010 25 mm 17.1 kg m3

  • Type : I-4010
  • Height : 25 mm
  • Top Edge Width : 15 mm
Fiberglass Grating

Moulded Panel Fiberglass Grating

  • Material : Fiberglass
Fiberglass Grating

FRP / GRP Pultruded Gratings, I 6015

  • Type : I-6015
  • Height : 38 mm
  • Open Area : 60 %
Saudigrate
Location : Riyadh
Fiberglass Grating

Pultruded Fiberglass Grating

  • Material : Fiberglass

Molded and pultruded fiberglass gratings suppliers in ksa for oil & gas, water treatment, and chemical processing facilities

FRP / GRP · Moulded · Pultruded · Certifications: ISO 9001:2015, BS EN 14122-2 deflection tested · Jeddah · Dammam · Al Khobar

Looking for fiberglass grating suppliers in Saudi Arabia? Saudigrate and Arabian Gratings in Jeddah, Busubait Fiberglass Company in Dammam, Spark Fiber Glass in Dammam and Al Khobar, and Al Noor International Industrial Company in Al Kharj are among the suppliers listed on FYIND KSA. Compare their available moulded and pultruded FRP/GRP grating panels, including 38 mm I-6015 and 25 mm I-4010 options, along with stair treads, platforms and trench covers. You can also explore more grating suppliers on FYIND for other material and product options.

Moulded polyester grating price starts at about SAR 170–245 per m² at factory level, before freight and VAT

Quick answer: For 38 mm pultruded I-6015 grating, call Saudigrate (Jeddah, +966 50 196 4303); for 25 mm pultruded I-4010, call Arabian Gratings (Jeddah, +966 12 647 3020); for moulded grating and custom FRP platforms, call Busubait Fiberglass (Dammam, +966 13 834 4489); for moulded or pultruded grating in the Eastern Province, call Spark Fiber Glass (Dammam and Al Khobar, +966 55 890 0952); near Riyadh, call Al Noor International (Al Kharj, +966 50 867 5490).

Estimated price: about SAR 170–245 per m².

Who sells fiberglass grating in Saudi Arabia?

Pultruded · Moulded · Steel · Stainless · Jeddah · Dammam · Al Khobar

Pick the supplier whose listed product matches your job, then call with your details ready: area in m², span between supports, load, chemical or fire exposure and delivery site. With those, the first call can become a quote.

If you need…CallWhy them
38 mm pultruded FRP/GRP grating (I-6015), with steel or stainless grating on the same orderSaudigrate – Jeddah +966 50 196 4303Jeddah grating specialist covering every material; 5.0 from 17 Google reviews
25 mm pultruded FRP grating (I-4010), plus press-locked steel grating and cable ladderArabian Gratings – Jeddah +966 12 647 3020ISO 9001:2015 grating maker in Jeddah
Moulded FRP grating and custom FRP platforms and stairs for chemical or water plantsBusubait Fiberglass – Dammam +966 13 834 4489Saudi-owned FRP manufacturer, ISO 9001:2015; 5.0 from 7 Google reviews
Moulded or pultruded FRP grating in the Eastern Province, including Al KhobarSpark Fiber Glass – Dammam / Al Khobar +966 55 890 0952Composite maker in Dammam Third Industrial City with an Al Khobar outlet
FRP grating with GRP fabrication or repair on site near RiyadhAl Noor International – Al Kharj +966 50 867 5490GRP fabricator offering tank, lining and repair work

Which fiberglass grating supplier should I choose in KSA?

By product · By city · By job

Pick by the panel you need and where your site is. For 38 mm pultruded I-6015 grating, or FRP on the same order as steel and stainless, call Saudigrate in Jeddah. For 25 mm pultruded I-4010 from an ISO 9001:2015 maker, call Arabian Gratings. For moulded grating and complete FRP platforms and stairs in the Eastern Province, call Busubait Fiberglass in Dammam. For moulded or pultruded panels near Al Khobar and Jubail, call Spark Fiber Glass. Near Riyadh, call Al Noor International in Al Kharj, which also does GRP fabrication and repair on site.

Choose Saudigrate or Arabian Gratings if you want a documented pultruded panel or a mixed FRP and steel order on the west coast. Call +966 50 196 4303 or +966 12 647 3020.

Choose Busubait or Spark Fiber Glass if your plant is in Dammam, Al Khobar or Jubail and needs moulded grating or FRP structures. Call +966 13 834 4489 or +966 55 890 0952.

Choose Al Noor International if you are near Riyadh and need grating plus GRP fabrication or repair. Call +966 50 867 5490.

Check before you order: Ask which resin the grating uses, because the chemical resistance depends on it, and whether the panel is moulded or pultruded. This is general guidance; your engineer should confirm it for the site. You can also explore different grating types and compare suppliers on the FYIND grating hub.

Where Can You Find Fiberglass Grating Suppliers in KSA?

5 Suppliers · Jeddah · Dammam · Al Khobar · Al Kharj · Get Directions

All five suppliers below list fiberglass grating on fyind. Two are Jeddah grating specialists that also make steel, stainless and aluminium grating (Saudigrate and Arabian Gratings). Two are FRP manufacturers in the Eastern Province (Busubait Fiberglass in Dammam, and Spark Fiber Glass in Dammam and Al Khobar). The fifth, Al Noor International, is a GRP fabricator in Al Kharj, south of Riyadh.

1. Saudigrate

Jeddah (Al Faisaliyyah) · Steel, stainless, aluminium and FRP/GRP gratings

Grating products listed

  • FRP/GRP pultruded grating I-6015: I-bars 38 mm deep at 38 mm centres (15 mm top, 23 mm gap), giving 60% open area at roughly 16.2 kg/m²; the bars are locked and glued, so the panel suits heavy-duty floors
  • FRP/GRP cable trays, 1–2.5 mm: rust-free cable support for chemical and coastal plants
  • Top notch stainless steel gratings, 3–6 mm: for kitchens, cold stores and hygienic areas
  • Heavy-duty press-locked and manually welded steel gratings: bearing bars up to 150–180 x 12 mm
DetailInformation
AddressOffice 10, Mezzanine Floor, Al Imam Abdul Aziz Street, Al Qafti, Al Faisaliyyah, Jeddah 23441
Phone+966 50 196 4303
Emailinfo@saudigrate.com
Business typeManufacturer and supplier (verified on fyind)
Opening hoursSunday to Thursday 8 am–6 pm; Friday and Saturday closed
Google rating5.0 ★ (17 reviews) · Read reviews (Jeddah)
Other productsMoulded FRP/GRP grating, electro-forged steel grating, AISI 304/316 stainless grating, drains and manhole covers, aluminium grating, stair treads, clamps, ladders, handrails and platforms
StandardsSays its products meet BS 4592 and NAAMM; ask for the ASTM E84 fire report for the FRP panel you order
Projects namedKAFD, SEC Headquarters, Qiddiya Water Theme Park and an Amazon data centre in Riyadh; Jeddah Airport, Jeddah Islamic Port and Rabigh IWP; the Haram mosques in Makkah and Madinah; Shuqaiq desalination; NEOM
Service areaJeddah, Riyadh, Dammam and Bahrain; part of a group with Ferrotech International and Gulf Grating
SuitsRefineries, petrochemical, power and desalination plants, wastewater, airports, marine and shipyards, food, pharma, cement and sugar plants
Estimated priceAbout SAR 170–245 per m² for 38 mm moulded polyester grating (factory level, before freight and VAT)
Morefyind profile

“The team was professional, friendly, and very helpful.” – Google reviewer

Note: One Google reviewer warns against paying in advance before stock is confirmed, so agree payment stages in writing.

2. Arabian Gratings

Jeddah · ISO 9001:2015 grating and access systems manufacturer

Grating products listed

  • Pultruded grating I-4010, 25 mm: a shallow 25 mm I-bar panel with a 15 mm wide top and only 10 mm between bars, so it is light and stops small objects falling through on walkways and platforms
  • Press-locked grating, 25–150 x 3–10 mm: flush steel grating for architectural and plant floors
  • Heavy-duty grating, 35–150 x 5–12 mm: for trucks, docks and heavy plant
  • Stainless drain with top cover and SS ladder: hygienic drainage and access items
DetailInformation
AddressOthman Ibn Affan Road, Jeddah 22234
Phone+966 12 647 3020
Emailsales@arabiangratings.com
Business typeManufacturer and supplier (ISO 9001:2015)
Opening hoursSunday to Thursday 8:30 am–6 pm; Saturday 9 am–5 pm; Friday closed
Google rating4.3 ★ (6 reviews) · Read reviews (Jeddah)
Other productsFRP/GRP floor grids and structural grating; electro-forged steel grating in ASTM A36, S235JR and S355JR, galvanised to BS EN ISO 1461; SS304/316 panels; aluminium walkways, ladders, handrails and treads; ductile iron and GRP manhole covers; cable ladders
CertificationISO 9001:2015
SuitsOil and gas, marine and offshore platforms, water and wastewater, desalination, heavy industry and infrastructure
Estimated priceAbout SAR 170–245 per m² for 38 mm moulded polyester grating (factory level, before freight and VAT)
Morefyind profile

“Professional service, timely execution, and strong attention to detail.” – Google reviewer

3. Busubait Fiberglass Company

Dammam · Saudi-owned FRP/GRP manufacturer · ISO 9001:2015

Grating products listed

  • Moulded panel fiberglass grating: grid panels in polyester, vinyl ester or phenolic resin for chemical areas and walkways
  • Customised FRP grating platform: built to your layout around tanks, pumps and valves
  • FRP stairs with pultruded profile and grating panel: complete rust-free stair units for plant access
DetailInformation
AddressDammam 31516 (P.O. Box 63113)
Phone+966 13 834 4489
Emailfiberglass@busubait.com
Business typeManufacturer (ISO 9001:2015, 100% Saudi-owned)
Opening hoursSaturday to Thursday 8 am–5 pm; Friday closed
Google rating5.0 ★ (7 reviews) · Read reviews (Dammam)
Other productsPultruded grating, handrails and ladders, FRP and dual-laminate tanks (PP, PVC, PVDF liners), FRP pipes, PTFE/PFA-lined fittings, scrubbers, ducts, roof curbs, lift stations, fire hose cabinets and manhole covers
CertificationISO 9001:2015; 100% Saudi-owned; products to relevant ASTM and BS standards
References namedSABIC, Saudi Aramco, SWCC, Ma’aden, Siemens and Baker Hughes
ServicesDesign, fabrication and installation support
SuitsChemical and petrochemical plants, desalination and water treatment, power, oil and gas and marine sites
Estimated priceAbout SAR 170–245 per m² for 38 mm moulded polyester grating (factory level, before freight and VAT)
Morefyind profile

“It is a very good company.” – Google reviewer

4. Al Noor International Industrial Company

Al Kharj (Riyadh region) · GRP and fiberglass fabrication and repair

Grating products listed

  • FRP gratings: fiberglass grating panels; confirm type, depth and load rating when you call
  • FRP ladders: non-conductive, rust-free access ladders
  • FRP storage and dual-laminate tanks: for water and chemicals
DetailInformation
AddressAl Kharj, Riyadh region
Phone+966 50 867 5490
Emailsibinxavier@alnoorfibreglass.com
Business typeGRP fabricator and supplier
Other productsCorrugated sheets, GRP cabinets, custom panels and pipes, GRP doors, sculptures and fountains
Site servicesTank lamination, manhole benching, pipe lining and industrial repair
SuitsWater and wastewater sites, corrosive industrial areas and commercial projects near Riyadh needing custom GRP work
Estimated priceAbout SAR 170–245 per m² for 38 mm moulded polyester grating (factory level, before freight and VAT)
Morefyind profile

Note: We could not find a Google Business Profile for this supplier, so there is no rating. Confirm whether panels are moulded or pultruded, and stocked or made to order.

5. Spark Fiber Glass

Dammam Third Industrial City and Al Khobar · FRP/GRP composite manufacturer

Grating products listed

  • Pultruded fiberglass grating: stiff, light panels for heavy-duty walkways and longer spans
  • Moulded fiberglass grating: square-mesh panels for chemical areas, platforms and trench covers
  • Manhole cover and chamber: GRP covers and chambers for utilities
DetailInformation
AddressFactory in Dammam Third Industrial City; factory outlet in Al Khobar Al Janubiyah, Al Khobar 34621
Phone+966 55 890 0952
Emailinfo@sparkfiberglass.com
Business typeManufacturer (FRP/GRP composites)
Opening hoursAl Khobar outlet: Saturday to Thursday 8 am–5 pm; Friday closed
Google rating5.0 ★ (4 reviews, Al Khobar outlet) · Read reviews (Al Khobar)
Other productsStructural FRP (I-beams, channels), access items (ladders, handrails), electrical enclosures, and a GRP tank range covering sectional, buried, fire-water and chemical storage, with UL 1316 listed tanks; also septic tanks, marker posts and portable toilets
SizesCustom panel sizes available
SuitsOil and gas, water and wastewater, municipal projects, high-rise construction, chemical processing and power in Dammam, Al Khobar and Jubail
Estimated priceAbout SAR 170–245 per m² for 38 mm moulded polyester grating (factory level, before freight and VAT)
Morefyind profile

“Good product with affordable price.” – Google reviewer

Check before you order: Ask the supplier which resin is used in the grating and whether the panel is moulded or pultruded. The resin type affects its resistance to chemicals and the conditions it can handle. Have your engineer confirm the material and load requirements for your site. You can also explore different grating suppliers and compare types on the FYIND grating suppliers in saudi.

Why Choose These Fiberglass Grating Suppliers?

Specialists · ISO 9001 · Saudi Factories · Project Support

People walk on grating every day, so a weak or slippery panel is a real injury risk. The supplier you want can prove its panel with tests, show how far it bends at your span, match the resin to your chemicals and supply clips that keep it in place. Below is a short profile of each one and the buyer it fits.

Saudigrate

A Jeddah grating specialist covering every material, so FRP, steel and stainless can arrive on one order with matching clamps and treads.

  • Range: moulded and pultruded FRP/GRP, steel, stainless 304/316 and aluminium grating, plus drains, covers, ladders, handrails and platforms
  • FRP data: publishes complete figures for its I-6015 panel, including depth, open area, bar centres and weight
  • Standards: says it meets BS 4592 and NAAMM
  • Projects: KAFD, SEC Headquarters, Qiddiya, Jeddah Airport, Jeddah Islamic Port, the Haram mosques, Shuqaiq desalination and NEOM
  • Team: over 30 years of combined experience
  • Rating: 5.0 from 17 Google reviews

Best choice if you are building on the Red Sea side and want FRP, steel and stainless from a single order, or need a fully documented 38 mm pultruded panel.

Arabian Gratings

An ISO 9001:2015 maker of industrial flooring and access systems in Jeddah.

  • Certification: ISO 9001:2015
  • Steel: electro-forged grating in ASTM A36, S235JR and S355JR, galvanised to BS EN ISO 1461
  • FRP: pultruded I-4010 25 mm grating, FRP floor grids and structural grating
  • Access package: aluminium walkways and treads, ladders, handrails, manhole covers, clamps and cable ladder
  • Rating: 4.3 from 6 Google reviews

Best choice if you need certified grating across steel and FRP, with a team used to project deadlines.

Busubait Fiberglass Company

A 100% Saudi-owned FRP maker in Dammam that builds grating, tanks, pipes and scrubbers for heavy industry.

  • Certification: ISO 9001:2015; products to ASTM and BS standards
  • Local content: fully Saudi-owned
  • Custom work: FRP grating platforms and stairs with pultruded profiles
  • References: SABIC, Saudi Aramco, SWCC, Ma’aden, Siemens and Baker Hughes
  • Chemical know-how: dual-laminate tanks and lined piping
  • Rating: 5.0 from 7 Google reviews

Best choice if your site is a chemical, petrochemical or desalination plant on the Gulf side and you want a local factory to design and build the FRP access steelwork.

Spark Fiber Glass

A composite maker with a factory in Dammam Third Industrial City and an outlet in Al Khobar, close to Eastern Province plants.

  • Grating: both moulded and pultruded FRP
  • Structural FRP: I-beams, channels, ladders and handrails for complete FRP platforms
  • Wider range: GRP tanks (UL 1316 listed), manholes, covers and enclosures
  • Location: short delivery runs to Jubail and Ras Tanura
  • Rating: 5.0 from 4 Google reviews (Al Khobar outlet)

Best choice if you are in Al Khobar, Dammam or Jubail and want grating plus FRP structural sections.

Al Noor International Industrial Company

A GRP fabricator in Al Kharj that pairs FRP grating with custom work and on-site repair.

  • Grating: FRP gratings and FRP ladders
  • Fabrication: custom GRP panels, tanks, pipes and doors
  • Site services: tank lamination, manhole benching, pipe lining and repair
  • Location: Al Kharj, handy for Riyadh and central sites

Best choice if you are near Riyadh and need grating together with GRP fabrication or repair on site.

Who Are the Best Fiberglass Grating Suppliers in KSA?

Best Suppliers · Pultruded · Moulded · ISO 9001

The best supplier depends on the grating type you need and where your site is. For pultruded FRP grating with published specs, the Jeddah pair lead: Saudigrate (I-6015, 38 mm, 60% open area, 5.0 from 17 Google reviews) and Arabian Gratings (I-4010, 25 mm, ISO 9001:2015). For moulded FRP grating and custom platforms in the Eastern Province, call Busubait Fiberglass (Saudi-owned, ISO 9001:2015) or Spark Fiber Glass (moulded and pultruded, Dammam and Al Khobar). Near Riyadh, Al Noor International adds GRP fabrication and repair.

Whoever you shortlist, test them with three requests: a load table showing sag at your exact span, a resin recommendation for your chemicals and fire class, and a fire test report such as ASTM E84. The firm that answers all three quickly and in writing tends to be the safest choice for the full job.

Check before you order: Ask for the span between supports and the pedestrian load the panel is rated for. Serrated bars give better grip on oily or wet walkways. This is general guidance; your engineer should confirm it for the site. You can also explore different grating types and compare suppliers on the FYIND grating hub.

Where Can I Find GRP/FRP Grating Suppliers in KSA?

GRP · FRP · Jeddah · Dammam · Al Kharj

Most GRP and FRP grating makers cluster around the Kingdom's two industrial coasts. On the west coast, Saudigrate (Al Faisaliyyah) and Arabian Gratings (Othman Ibn Affan Road) are both in Jeddah. In the Eastern Province, Busubait Fiberglass is in Dammam and Spark Fiber Glass has its factory in Dammam Third Industrial City and an outlet in Al Khobar. For central Saudi Arabia, Al Noor International is in Al Kharj, about an hour south of Riyadh. Use the buttons to get directions, or call first to check that the panel you need is in stock.

Most buyers order from the region where the grating will be fitted to keep freight short. On large projects, compare quotes from both coasts anyway: FRP panels are light, so transport adds little per m².

Which Companies Supply Steel, FRP, GRP, Aluminium and SS Gratings in Saudi Arabia?

Steel · FRP · GRP · Aluminium · Stainless

Two suppliers on this page cover every grating material. Saudigrate lists pultruded FRP/GRP grating, electro-forged, press-locked and welded steel grating, AISI 304/316 stainless grating and drains, and swaged and press-locked aluminium grating. Arabian Gratings lists FRP/GRP grating, electro-forged carbon steel grating in ASTM A36, S235JR and S355JR, SS304/316 panels, and aluminium walkways and stair treads. Buying all materials from one specialist keeps panel sizes, clips and treads the same across a plant, and gives you one contact for the whole grating package.

MaterialSaudigrateArabian Gratings
FRP/GRPPultruded I-6015, mouldedPultruded I-4010, floor grids
Carbon steelElectro-forged, press-locked, weldedElectro-forged A36 / S235JR / S355JR, hot-dip galvanised
Stainless steelAISI 304/316 grating, drains, coversSS304/316 panels, drains, ladders
AluminiumSwaged and press-lockedWalkways, treads, ladders

On most plants the materials divide by zone: galvanised steel takes the forklift and truck routes, FRP goes wherever acids, brine or sea air would eat steel, stainless covers kitchens and clean rooms, and aluminium is used where a light or spark-free floor is needed.

How Can I Find Fiberglass Grating Suppliers in KSA with Contact Numbers?

Contact Number · Call Direct · Email

You can call all five suppliers straight from this page: tap any number to dial. Before you call, have the grating type, depth, mesh or bar spacing, panel size, area in m², load, chemical exposure and delivery city to hand, so the sales team can price it on the spot. For project orders, email your drawing or layout after the call, so the quote includes cut panels, clips and nosings. Opening hours from Google are on each card; Al Noor International does not publish hours.

Check before you order: Ask the supplier which resin is used in the grating and whether the panel is moulded or pultruded. The resin type affects its resistance to chemicals and the conditions it can handle. Have your engineer confirm the material and load requirements for your site. You can also compare available options from grating suppliers on FYIND.

Where Can I Find Fiberglass Grating Suppliers in Al Khobar?

Al Khobar · Eastern Province · Dammam

Spark Fiber Glass has a factory outlet in Al Khobar Al Janubiyah as well as its factory in Dammam Third Industrial City, which makes it the closest supplier on this page for Al Khobar buyers. It lists both moulded and pultruded grating. Busubait Fiberglass in Dammam is also a short drive away and makes moulded panels, custom FRP platforms and stairs. For coastal buildings, desalination intakes, cooling towers and plant upgrades around Dammam, Khobar and Dhahran, ask for vinyl ester resin and UV-protected panels.

On the Gulf coast, sea air and harsh sunlight wear FRP out faster than anything else, which is why resin choice and a protective surface veil count for more there than at an inland site.

Which Fiberglass Grating Suppliers Serve Riyadh, Jeddah, Dammam and Jubail?

Riyadh · Jeddah · Dammam · Jubail

Jeddah buyers can choose between Saudigrate and Arabian Gratings. Dammam has Busubait Fiberglass and Spark Fiber Glass, which are also the closest choice for Jubail, roughly an hour's drive up the coast. For Riyadh, Al Noor International in Al Kharj is the closest supplier on this page, and the Jeddah and Dammam suppliers can quote delivered prices. Saudigrate says it serves Riyadh, Jeddah and Dammam, with Riyadh projects such as KAFD, SEC Headquarters and Qiddiya. FRP weighs roughly a quarter to a third of steel, so long-distance delivery is practical.

CityNearest suppliers on this page
JeddahSaudigrate, Arabian Gratings
Dammam / Al KhobarBusubait Fiberglass, Spark Fiber Glass
JubailBusubait Fiberglass, Spark Fiber Glass (delivery)
RiyadhAl Noor International (Al Kharj); others deliver

Ask each supplier for a delivered price to your site and the lead time for cut-to-size panels.

What Types of Fiberglass and Industrial Gratings Are Available in Saudi Arabia?

Moulded FRP · Pultruded FRP · Steel · Stainless · Aluminium

The Saudi market offers moulded and pultruded FRP grating, FRP stair treads and covered panels, and steel, stainless steel and aluminium grating. Each type below covers where to use it, its main features, typical specs, the price guide and which supplier to call.

What do I-6015 and I-4010 mean, and which should I choose?

Pultruded I-bar · 38 mm · 25 mm · Open area

Both are pultruded FRP panels made from I-shaped bars. The I-6015 listed by Saudigrate is 38 mm deep with 60% open area and bars 38 mm apart, weighing about 16.2 kg/m²; its deep bars span further and carry more, so it suits platforms, pipe-rack walkways and longer gaps between supports. The I-4010 listed by Arabian Gratings is 25 mm deep with a 15 mm top edge and only 10 mm between bars; it is lighter and stops small tools dropping through, so it suits short-span walkways and areas below which people work.

PointI-6015 (Saudigrate)I-4010 (Arabian Gratings)
Depth38 mm25 mm
Gap between bars23 mm (38 mm centres)10 mm
Open area60%Lower
Span and loadLonger spans, higher loadsShorter spans, foot traffic
Best forPlatforms, pipe racks, long walkwaysLight walkways, areas with people below
Estimated priceAbout SAR 190–265 per m² (polyester)Ask for a quote

Moulded FRP Grating – Chemical Areas, Platforms and Walkways

Square Mesh · Bi-Directional · 25–50 mm

Moulded FRP grating is made in one piece: continuous glass fibre is laid into a square-grid mould and soaked with resin. The panel ends up equally strong in both directions and rich in resin, which gives it the best corrosion resistance of any grating type.

You can cut it almost anywhere without it losing shape, so it is easy to fit around pipes, pumps and columns on site.

Where and when to use it

  • Chemical plant floors and bunds: dosing skids, pump plinths and tank bunds in the Jubail and Yanbu petrochemical zones, where an acid or caustic spill would ruin bare steel quickly
  • Wastewater and desalination walkways: clarifier bridges, filter galleries and intakes in wet, salty and chlorinated air
  • Cooling towers: fan decks and walkways in constant humidity
  • Coastal and marine platforms: jetties, pontoons and seawater pump rooms on the Red Sea and Gulf coasts

Product features

  • Equal strength both ways
  • Highest resin content and best corrosion resistance
  • Grit or concave anti-slip top
  • Easy to cut on site
  • Non-conductive and non-sparking

Specifications

ItemDetail
Common depths25, 30, 38 and 50 mm
Common mesh38 x 38 mm (40 x 40 mm also used)
ResinsIsophthalic polyester, vinyl ester, phenolic
Standards to ask forBS 4592-4 (GRP open-mesh grating), ASTM E84 flame spread
Estimated priceAbout SAR 130–190 per m² (25 mm polyester), SAR 170–245 (38 mm polyester), SAR 225–320 (38 mm vinyl ester), factory level
Where to buyBusubait Fiberglass +966 13 834 4489 · Spark Fiber Glass +966 55 890 0952 · Saudigrate +966 50 196 4303 · Al Noor International +966 50 867 5490

Pultruded FRP Grating – Heavy-Duty Walkways and Longer Spans

I-Bar · T-Bar · High Load

Pultruded grating starts as glass fibre pulled through a resin bath and a heated die, which forms I- or T-shaped bars; cross rods then lock the bars together. Most of the glass runs along each bar, so the panel is much stiffer that way and spans further than moulded grating.

Pick it when supports are far apart or loads are heavy, such as long platforms, offshore decks and cart aisles.

Where and when to use it

  • Long-span platforms and pipe racks: walkways on racks and tank tops with supports 1 m or more apart
  • Oil and gas process areas: platforms around separators, wellheads and compressors where rust and sparks are a concern
  • Wastewater plants: channel covers and walkways that must be stiff yet light to lift
  • Marine and food sites: docks and wash-down areas needing stiff, rust-free floors

Product features

  • More stiffness and load per kg than moulded
  • Longer spans between supports
  • Higher glass content
  • Choice of open areas and bar spacing

Specifications

ItemDetail
I-6015 (Saudigrate)38 mm high, 60% open area, 38 mm spacing, about 16.2 kg/m²
I-4010 (Arabian Gratings)25 mm high, 15 mm top edge, 10 mm clearance
ResinsPolyester, vinyl ester, phenolic
Estimated priceAbout SAR 190–265 per m² (38 mm I-bar polyester) and SAR 265–355 (vinyl ester), factory level
Where to buySaudigrate +966 50 196 4303 · Arabian Gratings +966 12 647 3020 · Spark Fiber Glass +966 55 890 0952

FRP Stair Treads, Covered Grating and Trench Covers – Stairs, Drains and Trenches

Stair Treads · Grit Top · Trench Covers

An FRP stair tread is a strip of grating with a stronger, brightly coloured front edge so people can see each step. Covered grating has a gritty FRP sheet glued over the top, turning the open grid into a solid, non-slip floor that nothing can fall through.

Both are cut from standard moulded or pultruded panels and fixed with stainless or FRP clips.

Where and when to use it

  • Plant staircases: access stairs to tanks, scrubbers and process platforms in chemical and coastal plants
  • Trench and channel covers: cable and drain trenches in substations, pump houses and treatment plants
  • Solid walkways: areas where tools must not drop through
  • Ramps and wet areas: wash-down zones needing a continuous grit surface

Product features

  • Anti-slip grit surface
  • High-visibility nosing on treads
  • Light panels lift out easily
  • Non-conductive covers for cable trenches

Specifications

ItemDetail
Base panelMoulded or pultruded grating
Top plateGritted FRP plate (covered grating)
FixingsStainless steel or FRP hold-down clips
PriceQuoted per tread or per m²; covered panels cost more than open grating
Where to buyBusubait Fiberglass +966 13 834 4489 · Spark Fiber Glass +966 55 890 0952 · Saudigrate +966 50 196 4303

Carbon Steel Grating – Heavy Industrial Loads and Vehicle Areas

Electroforged · Press-Locked · Hot-Dip Galvanised

Steel grating is a grid of flat bearing bars joined by cross bars, either electro-forged (resistance welded) or press-locked, and hot-dip galvanised against rust outdoors. It gives the most load for the money, but it corrodes in chemical and splash zones where FRP or stainless is the better pick. See all steel grating suppliers on fyind.

Where and when to use it

  • Truck and forklift areas: heavy-duty bar grating in docks, loading bays and road crossings
  • General plant platforms: dry areas of refineries, power plants and factories
  • Architectural floors: press-locked grating for neat walkways and facades

Product features

  • Highest load capacity per riyal
  • Galvanised for outdoor use
  • Wide range of bar sizes

Specifications

ItemDetail
GradesASTM A36, S235JR, S355JR
GalvanisingBS EN ISO 1461
Bar sizes listed25–150 x 3–12 mm; up to 180 x 12 mm heavy duty
PriceQuoted per m² or per tonne by bar size and finish
Where to buyArabian Gratings +966 12 647 3020 · Saudigrate +966 50 196 4303

Stainless Steel Grating – Food, Pharmaceutical and Hygienic Areas

AISI 304 · AISI 316 · Hygienic

Stainless grating stays rust-free and can be scrubbed and disinfected every day, which is why food, pharma and hospital areas use it. Choose grade 304 for normal indoor rooms and 316 where seawater, salt or chlorine are around. See more stainless steel grating suppliers on fyind.

Where and when to use it

  • Commercial kitchens and cold stores: drain grating and channel covers in hotel and hospital kitchens
  • Food and pharma plants: floors and drains in wash-down production areas
  • Coastal architecture: visible grating on waterfront projects where rust stains are not acceptable

Product features

  • No rust, easy to sanitise
  • Clean appearance
  • Matches stainless drains and covers

Specifications

ItemDetail
GradesAISI 304 and 316
Products listedTop notch grating 3–6 mm, drains, manhole covers 300–900 mm
PriceQuoted per m²; usually several times the price of galvanised steel
Where to buySaudigrate +966 50 196 4303 · Arabian Gratings +966 12 647 3020

Aluminium Grating – Lightweight Architectural and Trench Use

Swaged · Press-Locked · Non-Sparking

Aluminium grating is light, does not rust in normal air and does not spark, so it suits walkways, architectural screens and trench covers that are lifted often. It is less stiff than steel, so check spans and loads against the supplier's table. See the aluminium grating page for more.

Where and when to use it

  • Architectural screens and walkways: facade grilles, sunshades and light walkways
  • Trench covers lifted often: light covers maintenance staff lift by hand
  • Non-sparking areas: walkways where steel-on-steel sparks are a hazard

Product features

  • Light weight
  • Non-sparking
  • Good weather resistance

Specifications

ItemDetail
ConstructionSwaged and press-locked
ProductsGrating, walkways, stair treads, ladders, handrails
PriceQuoted per m² by bar size
Where to buySaudigrate +966 50 196 4303 · Arabian Gratings +966 12 647 3020

Where Can I Buy FRP/GRP Molded Gratings in KSA?

Moulded · FRP · GRP · Dammam · Jeddah

In the Eastern Province, Busubait Fiberglass in Dammam and Spark Fiber Glass in Dammam and Al Khobar both make moulded panels. On the west coast, Saudigrate in Jeddah supplies them too, and near Riyadh, Al Noor International in Al Kharj lists FRP grating; ask it which type it stocks. When you order, state the depth (25, 30, 38 or 50 mm), mesh (usually 38 x 38 mm), resin, surface (grit or concave), colour, panel size and total area, and ask for the load and deflection table for your span before you approve the quote.

ResinUse it for
Isophthalic polyesterGeneral use, mild chemicals, wastewater
Vinyl esterStrong acids, alkalis and chlorine
PhenolicFire-sensitive and low-smoke areas

What Is the Difference Between Molded and Pultruded Fiberglass Gratings?

Moulded vs Pultruded · Strength · Corrosion

Moulded grating is cast as one square-mesh panel with about 30–35% glass; the rest is resin. It is equally strong both ways, resists corrosion best and is easy to cut. Pultruded grating is built from I- or T-shaped bars with about 60–70% glass running along them, so it is much stiffer in one direction and spans further. In practice, use moulded for chemical areas, short spans and cut-outs, and pultruded for long spans, heavy loads or when you need less weight for the same stiffness.

FeatureMouldedPultruded
Strength directionBoth directionsMainly along the bars
Glass contentLower (resin-rich)Higher
Corrosion resistanceExcellentVery good
SpanShorterLonger
Cutting on siteEasy, any shapeNeeds care so bar ends stay supported
Example on this pageBusubait Fiberglass moulded panelSaudigrate I-6015, Arabian Gratings I-4010

What I-6015 and I-4010 mean: the "I" is the I-shaped bar. Saudigrate's I-6015 is 38 mm deep with 60% open area and 38 mm between bars; Arabian Gratings' I-4010 is 25 mm deep with a 15 mm top edge and 10 mm clearance. A deeper bar spans further, so ask for the load and span table.

Which Suppliers Offer Molded Fiberglass Grating for Platforms, Stair Treads and Trench Covers?

Platforms · Stair Treads · Trench Covers

Busubait Fiberglass lists moulded panel grating, a customised FRP grating platform and FRP stairs with pultruded profiles, so it can supply a full platform-and-stair package. Spark Fiber Glass lists moulded and pultruded grating plus FRP I-beams, channels, ladders, handrails and GRP manhole covers. Saudigrate supplies FRP grating with stair treads, clamps, ladders, handrails and structural platforms. For platforms, ask for a grit surface and hold-down clips; for treads, a reinforced high-visibility nosing; for trench covers, give the trench width and load.

Ask for a covered top on trench covers if small items must not drop through, and lift handles so maintenance staff can open them.

Where Can I Find Steel Fiberglass Grating Suppliers in KSA?

Steel · Fiberglass · Grating Specialists

If you need both steel and fiberglass grating, call the two Jeddah specialists. Saudigrate lists pultruded FRP/GRP grating alongside electro-forged, press-locked and manually welded steel grating. Arabian Gratings lists pultruded FRP grating with electro-forged steel grating in ASTM A36, S235JR and S355JR, galvanised to BS EN ISO 1461, and press-locked grating from 25 to 150 mm. A common plant layout uses galvanised steel in dry, high-load zones and FRP in chemical, wet and coastal zones. More options are in the steel grating listings.

Which Suppliers Offer Aluminium and Stainless Steel Gratings in Saudi Arabia?

Aluminium · Stainless Steel · 304 · 316

Saudigrate offers AISI 304 and 316 stainless grating and drains for kitchens, cold stores and chemical plants, top notch stainless grating in 3–6 mm, stainless manhole covers from 300 to 900 mm, and swaged and press-locked aluminium grating. Arabian Gratings offers SS304 and SS316 panels for hygienic and coastal areas, plus aluminium walkways, ladders, handrails and stair treads. Choose stainless for hygiene and looks, and aluminium where weight or sparks matter. For chemicals, compare the price with vinyl ester FRP first.

See more on the stainless steel grating and aluminium grating pages.

Chemical · Oil and Gas · Water Treatment · Platforms · Trench Covers

Which resin should fiberglass grating use: polyester, vinyl ester or phenolic?

Isophthalic polyester · Vinyl ester · Phenolic

The resin decides how well FRP grating resists chemicals, heat and fire, so choose it before the panel type. Isophthalic polyester is the standard, lower-cost resin for wet areas, wastewater and mild chemicals. Vinyl ester costs about a third more but stands up to strong acids, alkalis, chlorine and hydrogen sulphide, so it is the usual pick for chemical plants and desalination dosing. Phenolic resin gives the lowest smoke and best fire performance for offshore and enclosed areas. For outdoor use in Saudi sun, ask for UV inhibitors in any resin.

ResinBest forEstimated price (38 mm moulded)
Isophthalic polyesterGeneral use, wastewater, mild chemicalsAbout SAR 170–245 per m²
Vinyl esterStrong acids, alkalis, chlorine, H₂SAbout SAR 225–320 per m²
PhenolicFire-sensitive, offshore, low smokeAsk for a quote

Which Chemical-Resistant FRP Gratings Are Suitable for Industrial Facilities?

Vinyl Ester · Isophthalic · Chemical Resistance

For strong acids, alkalis, chlorine and solvents, specify vinyl ester grating; it is the standard choice for chemical plants, chlor-alkali units, battery rooms and desalination dosing. For mild chemicals, wet floors and wastewater, isophthalic polyester is usually enough and costs less. Moulded grating carries the most resin, so it resists chemicals best. Check the supplier's chemical chart for your exact chemical, strength and temperature, since resistance falls as heat rises. Busubait Fiberglass and Spark Fiber Glass both build chemical tanks and work with chemical-grade resins.

Before ordering: Ask which resin the grating uses and whether the panel is moulded or pultruded, because chemical resistance depends on both. Your site engineer can confirm the choice. Need more suppliers? Explore the grating suppliers listed on FYIND.

Where Can I Find FRP Molded Gratings for Corrosive and Heavy-Duty Industrial Environments?

Corrosive · Heavy-Duty · Moulded

For harsh, corrosive plants on the Gulf, the Dammam makers Busubait Fiberglass and Spark Fiber Glass are a short drive from Jubail and Ras Tanura; on the Red Sea side, Saudigrate in Jeddah is nearest to Yanbu and Rabigh. For heavier duty, step up to 38 or 50 mm depth, or switch to pultruded grating, which carries more over the same span. In FRP, heavy duty means people, carts and light equipment. If forklifts or trucks will cross, ask for a heavy-duty pultruded panel with a wheel-load table, or use galvanised steel in that zone.

Which Molded and Pultruded Fiberglass Gratings Are Suitable for Oil and Gas Facilities?

Oil and Gas · Fire Retardant · Non-Sparking

Oil and gas sites use moulded grating around process equipment, chemical injection skids and splash zones, and pultruded grating on long pipe-rack walkways and platforms. Both should be fire-retardant, with an ASTM E84 flame spread of 25 or less (Class 1); offshore and enclosed areas often call for phenolic resin for low smoke. FRP does not conduct or spark and does not rust in hydrogen sulphide or salt air. Saudigrate and Arabian Gratings list oil and gas work, and Busubait Fiberglass names Saudi Aramco and SABIC among its references.

Check whether the site needs an approved vendor before you place the order.

Which FRP Gratings Are Suitable for Water Treatment and Chemical Processing Facilities?

Water Treatment · Desalination · Chemical Processing

Sewage and water plants are wet all the time and full of hydrogen sulphide, which destroys steel, so 38 mm moulded panels in isophthalic or vinyl ester resin are the norm on their walkways, clarifier bridges, filter galleries and channel lids. Desalination plants use vinyl ester near seawater intakes and dosing. Chemical plants use vinyl ester moulded grating in bunds and spill zones. Busubait Fiberglass serves water and desalination and builds FRP tanks and scrubbers; Spark Fiber Glass serves municipal water projects; Saudigrate and Arabian Gratings serve wastewater and desalination plants.

AreaSuggested grating
Sewage treatment walkwaysMoulded 38 mm, grit top, vinyl ester near H₂S
Desalination intakesVinyl ester moulded, UV-protected
Chemical dosing roomsVinyl ester moulded with covered top
Channel coversPultruded for long spans, lift-out panels

Which Fiberglass Gratings Are Suitable for Industrial Platforms, Walkways and Staircases?

Platforms · Walkways · Staircases

Where the support beams are no more than about a metre apart, a 38 mm moulded panel with a gritted top is the standard walkway pick. For platforms with longer spans or equipment loads, pultruded grating such as the 38 mm I-6015 is stiffer. For stairs, use FRP treads with a reinforced, high-visibility nosing on FRP or steel stringers. Busubait Fiberglass offers custom FRP platforms and complete stairs, Spark Fiber Glass supplies FRP beams, channels, ladders and handrails, and Saudigrate supplies treads, handrails, ladders and platforms. An all-FRP structure avoids rust at joints.

Before ordering: Check the distance between supports and the pedestrian load the grating panel can handle. Your site engineer can confirm whether the panel is suitable for the walkway. Need to find the right supplier? Explore the grating suppliers listed on FYIND.

How Do You Choose FRP Gratings for Trench Covers and Drainage Applications?

Trench Covers · Drainage · Load

First decide what will cross the trench: just people, wheeled carts, or vehicles. FRP covers suit foot and light traffic; for vehicle crossings, ask for a heavy-duty pultruded panel with a wheel-load table, or use steel or ductile iron in that stretch. Then use the trench width as the span and choose a depth that keeps bending small. Open moulded grating lets water and debris through, while covered grating keeps sand out of cable trenches. Use vinyl ester for chemical drains and ask for lift handles or keyholes.

FRP covers do not conduct electricity, which makes them a good fit for cable trenches in substations.

Which Standards and Certifications Should You Check Before Buying Gratings?

ASTM E84 · ISO 9001:2015 · EN 13501 · BS 4592 · BS EN 14122-2

Two kinds of paperwork matter. One proves the factory is well run, such as an ISO 9001 certificate. The other proves the panel itself performs, such as a fire test, a load test or a material standard. Always ask for documents that name the exact panel you are buying; a general statement on a company website is not enough.

Which Grating Suppliers in KSA Offer Products Tested to ASTM E84?

ASTM E84 · Flame Spread · Class 1

ASTM E84 is a tunnel test that times how quickly fire travels along a material. A score of 25 or under puts FRP in Class 1 (also called Class A), which most plant platforms demand. We found no published E84 report from any of the five suppliers, so make the report part of your quote request. Saudigrate, which supplies FRP for oil and gas, desalination and airport projects, and Arabian Gratings are good first calls for fire-rated panels. Fire performance depends on the resin and additives, not the grating shape.

A valid report names the product, resin, lab and date, and gives the measured flame spread and smoke figures.

How Can I Find Grating Suppliers with ISO 9001:2015 Certification?

ISO 9001:2015 · Quality System

Of the five, Arabian Gratings and Busubait Fiberglass say they hold ISO 9001:2015. The certificate means an outside auditor has checked how the firm designs, makes and inspects its products, and many Aramco, SABIC and government tenders will not accept a supplier without it. Ask for a copy of the certificate and check the certifying body, the scope (it should cover grating or FRP products) and the expiry date; you can confirm it on the certifier's online register. For the other suppliers, ask whether they hold ISO 9001 or buy from a certified factory.

Which FRP/GRP Gratings Meet EN 13501 Fire Classification Requirements?

EN 13501-1 · Fire Class · Europe

EN 13501-1 is Europe's system for grading how building materials behave in a fire. Each product gets a letter from A1 (does not burn) down to F, plus a smoke score (s1–s3) and a dripping score (d0–d2). Some Saudi projects, especially those with European consultants, ask for an EN 13501-1 class instead of ASTM E84. None of the five suppliers publishes one for its FRP grating, so ask for the classification report for your resin and panel. Phenolic and fire-retardant resins score better than standard polyester.

If your spec names EN 13501, do not accept an ASTM E84 report instead unless the consultant approves it.

Which Grating Products Have CE Marking and Relevant OSHA Safety Compliance?

CE Marking · OSHA · Walking Surfaces

The CE logo is a European conformity claim, and on grating it is only worth something if the maker can hand over a signed declaration naming the standard it meets; ask for that document. OSHA is a US workplace safety rule (29 CFR 1910 Subpart D covers walking and working surfaces). It does not certify products, but many Saudi plant specs follow it, for example covers strong enough for twice the expected load and slip-resistant surfaces. None of the five suppliers publishes CE or OSHA statements for specific grating.

Ask the supplier to show, with test data, how the grating meets your project's load, slip and opening-size rules, and have your safety engineer confirm it.

Which FRP Grating Suppliers Follow BS 4592 and NAAM Standards?

BS 4592 · NAAMM · Industrial Flooring

Saudigrate says its products are specified against BS 4592 and NAAMM. BS 4592 is the British standard for industrial flooring and stair treads: Part 4 covers GRP moulded open-mesh grating and Part 1 covers metal bar grating. NAAMM (the National Association of Architectural Metal Manufacturers) publishes the metal bar grating manual used for steel and aluminium loads, so for FRP grating ask for BS 4592-4 compliance or the maker's own load tables. Arabian Gratings can confirm which grating standard its panels follow.

Where Can I Find FRP Gratings with BS EN 14122-2 Deflection Testing?

BS EN ISO 14122-2 · Deflection · Working Platforms

BS EN ISO 14122-2 sets safety rules for working platforms and walkways on machinery, including the load the floor must carry and how far it may bend. A deflection-tested FRP panel has been loaded to prove it stays within that limit, often a fraction of the span such as 1/200, with a maximum in millimetres. None of the five suppliers publishes a 14122-2 report, so ask for one for your panel and span. Pultruded panels such as Saudigrate's I-6015 and Arabian Gratings's I-4010 are most likely to pass at longer spans.

Give the supplier your support spacing and the test load from your spec so the report matches your design.

How Do You Choose the Right Fiberglass Grating for Your Project?

FRP vs GRP · Corrosion · Load and Span · Moulded vs Pultruded · FRP vs Steel

Settle five points and the right panel almost picks itself: the name your specification uses, how aggressive the environment is, the load and support spacing, moulded versus pultruded, and whether FRP beats steel or stainless for this area at all.

What Is the Difference Between FRP, GRP and Fiberglass Gratings?

FRP · GRP · Fiberglass

They are three names for one product: a hard plastic resin strengthened with glass fibres. FRP stands for fibre-reinforced plastic and GRP for glass-reinforced plastic. FRP is the usual term in American and Aramco or SABIC specs, GRP is the British and Gulf term, and fiberglass is the everyday name. What actually changes performance is how the panel is made (moulded or pultruded), the resin (polyester, vinyl ester or phenolic) and the depth and mesh. Compare quotes on those details, not on the name.

How Do You Select the Right Grating for Corrosive Industrial Environments?

Corrosion · Resin · Material

Grade the area from mild to severe and let that drive the choice. A dry indoor hall is fine with galvanised steel. Damp, salty or seafront zones call for FRP in isophthalic or vinyl ester resin. Anywhere with strong chemicals, H₂S or chlorine, go to moulded vinyl ester. Clean food areas with light chemicals can take 316 stainless. In Saudi Arabia, add sun and heat: outdoor FRP needs UV inhibitors and a surface veil, and a resin rated above the hottest surface temperature, which can pass 70 °C on dark panels in summer.

EnvironmentBest choice
Dry indoor, heavy loadsGalvanised steel
Coastal, humid, wastewaterFRP, isophthalic or vinyl ester
Strong chemicals, H₂S, chlorineFRP, vinyl ester moulded
Food and hygiene304/316 stainless
Offshore, enclosed, fire riskFRP, phenolic resin

How Do Load Capacity, Span and Deflection Affect Fiberglass Grating Selection?

Load · Span · Deflection

FRP is strong but bends more than steel, so deflection (how much the panel sags) usually decides the size, not breaking strength. Deflection grows very fast with span: doubling the gap between supports makes a panel bend many times more under the same load, and a bouncy floor is unsafe even if it never breaks. Give the supplier the span, the load (uniform in kN/m² or a point load) and the allowed sag, then pick the depth from its load table. Walkways are often limited to about 1/200 of the span, or 6–10 mm.

When the load table shows too much sag for your span, either fit an extra support beam or step up to a deeper panel or a pultruded one.

Should You Choose Molded or Pultruded FRP Gratings for Heavy-Duty Applications?

Heavy-Duty · Moulded · Pultruded

When the floor must carry a lot over wide gaps, pultruded panels win, since nearly all their glass lies along the bars and makes them very stiff for their weight. For heavy duty where chemical attack is the main threat, or where there are many cut-outs and short spans, choose deep moulded grating (38–50 mm) in vinyl ester. Many plants use both: pultruded on pipe racks and long platforms, moulded around pumps, tanks and dosing skids. Saudigrate and Arabian Gratings list pultruded panels; Busubait Fiberglass lists moulded; Spark Fiber Glass lists both.

How Do Fiberglass Gratings Compare with Steel and Stainless Steel Gratings?

FRP vs Steel · Stainless · Life Cost

FRP grating weighs about a quarter to a third of steel and does not rust, conduct electricity or spark, so it lasts far longer than galvanised steel in wet and chemical areas and never needs painting. Steel is stronger and stiffer, costs less per m² and handles vehicles more easily. Stainless resists corrosion and is hygienic but costs much more than both. Over the life of a corrosive plant, FRP often works out cheaper because rusting steel must be repaired or replaced; in dry, heavy-load areas, galvanised steel is usually better value.

PropertyFRPGalvanised steelStainless steel
WeightLightHeavyHeavy
CorrosionExcellentFairVery good
StiffnessLowerHighHigh
ElectricalNon-conductiveConductiveConductive
SparkingNon-sparkingCan sparkCan spark
Initial costMediumLowestHighest

How Can You Compare Fiberglass Grating Suppliers and Prices in KSA?

Bulk · Price · Panel Sizes · Delivery · Quotes

Compare suppliers on the same specification, area and delivery point. As a guide, 38 mm moulded polyester grating costs about SAR 170–245 per m² at factory level. The answers below cover bulk orders, prices, panel options, delivery and getting several quotes.

Which Fiberglass Grating Suppliers in KSA Offer Bulk Orders and Industrial Supply?

Bulk · Industrial Supply · Projects

Big plant orders are best placed with a factory rather than a trader. In Dammam, Busubait Fiberglass holds ISO 9001:2015, names Aramco, SABIC and SWCC among past clients, and can engineer whole FRP platforms and stair towers. Spark Fiber Glass makes moulded and pultruded grating with FRP structural sections in Dammam Third Industrial City. Saudigrate and Arabian Gratings in Jeddah supply mixed FRP, steel and stainless packages for plants. For bulk orders, ask for the price per m² by panel type, cutting and edge-sealing charges, clips per m², delivery to site and the lead time for the full quantity.

Ask whether panels can be cut to size and marked to your layout drawing, which saves time on installation.

How Can I Compare FRP/GRP Grating Prices in Saudi Arabia?

GratingFactory reference (USD/m²)Estimated SAR/m²
Moulded 25 mm polyester35–50130–190
Moulded 38 mm polyester45–65170–245
Moulded 38 mm vinyl ester60–85225–320
Pultruded 38 mm I-bar polyester50–70190–265
Pultruded 38 mm I-bar vinyl ester70–95265–355

Prices are estimates for Nov 2026. Ask each supplier to list VAT, freight, cutting and clips as separate lines.

Which Suppliers Offer Fiberglass Gratings with Different Panel Sizes, Mesh Patterns and Load Ratings?

Panel Sizes · Mesh · Load Ratings

Saudigrate and Arabian Gratings offer different pultruded profiles: the I-6015 from Saudigrate is 38 mm deep with 60% open area and 38 mm spacing for heavier loads, while the I-4010 from Arabian Gratings is 25 mm deep with a 10 mm gap for lighter walkways where small items must not drop through. Spark Fiber Glass offers moulded and pultruded grating, and Busubait Fiberglass makes moulded panels and custom platforms. Moulded grating usually comes in 38 x 38 mm mesh at 25, 30, 38 and 50 mm depths, with mini-mesh options.

Ask each supplier for its full list of depths, mesh sizes and panel sizes, with a load table for each, so you can pick the lightest panel that meets your span.

Which Fiberglass Grating Suppliers Provide Delivery to Riyadh, Jeddah, Dammam and Jubail?

Delivery · Riyadh · Jeddah · Dammam · Jubail

Delivery times are not posted by any of the five, so stock and lead time must be checked by phone. Looking at the map, Saudigrate and Arabian Gratings are in Jeddah; Busubait Fiberglass and Spark Fiber Glass are in Dammam (Spark also in Al Khobar) and closest to Jubail; and Al Noor International in Al Kharj is closest to Riyadh. FRP panels are light, so trucking them from one coast to the other is affordable. Get the price quoted delivered to your gate, and check whether stock panels are on the shelf, because cut-to-size work and special resins are made to order and take longer.

Confirm the lead time before you fix an installation date.

How Can I Request Quotations from Multiple Fiberglass Grating Suppliers in KSA?

Quotations · Compare · RFQ

Call or email two or three suppliers from this page with the same written request. A complete request gets a firm price you can compare on the first reply. Include the items below, then ask each supplier to show the price per m², cutting, clips, VAT, freight and lead time on separate lines, so you can compare quotes line by line rather than by the total alone. Send your drawing with the request so cut-outs and edge panels are priced from the start.

  1. Type: moulded or pultruded, open or covered
  2. Depth and mesh or bar spacing (for example 38 mm, 38 x 38 mm)
  3. Resin (polyester, vinyl ester or phenolic), colour and grit surface
  4. Area in m², panel sizes or layout drawing, number of cut-outs
  5. Span between supports, design load and deflection limit
  6. Certificates: ASTM E84, ISO 9001, BS 4592-4, load test report
  7. Clips, nosings, stair treads, delivery city and date

How do Saudi heat, sand and coastal air affect fiberglass grating?

Heat · Sand · Coast · Approvals

FRP does not rust, so salt air is far less of a problem than for steel, but Saudi sun and heat need planning. Strong UV can fade the surface and expose fibres if the resin has no UV protection, and dark panels can get very hot in summer. Blown sand also fills openings. Tell the supplier where the grating will be fitted and how exposed it is, and ask for UV-protected resin and a surface veil for outdoor use. The tips below cover the main site issues.

KSA tip – Heat and UV: Ask for UV inhibitors and a surface veil on outdoor FRP, and a resin rated above the hottest panel temperature, which can pass 70 °C in summer.

KSA tip – Sand and shamal winds: Blown sand fills grating openings and the channels beneath. Plan lift-out panels or cleaning access, and clear drains after storms.

KSA tip – Coastal air: At Jeddah, Dammam, Al Khobar and Jubail, salt air attacks bare and painted steel, but FRP does not rust. Use vinyl ester for seawater splash zones and stainless clips.

KSA tip – Approvals: Plant and oil and gas clients may require an approved vendor; fire escapes and stairs may need Civil Defense sign-off. Check before ordering.

KSA tip – Summer midday work ban: Outdoor work is restricted around midday in summer, usually from 15 June to 15 September. Check each year's dates and plan installation for mornings.

How is fiberglass grating installed?

Supports · Fixing · Cut edges

Installation is usually done by your contractor, and Busubait Fiberglass offers design, fabrication and installation support for its platforms. FRP panels are light and go in quickly, but they need correct support spacing, proper hold-down clips and sealed cut edges. If cut edges are left raw, moisture and chemicals can soak into the exposed fibres and weaken the panel over time. Follow the steps below, and ask the supplier to send clips, nosings and sealing resin with the grating.

  1. Check the supports or frame are level and at the right spacing for the panel span.
  2. Set out pultruded panels so the bars run across the supports, never along them.
  3. Fix every panel with the stainless or FRP clips the maker specifies; loose panels are a fall hazard.
  4. Seal every cut edge with the resin supplied by the maker.
  5. Check panels sit flat and do not rock before opening the area.

Safety: barrier off any open grating area during installation. This is general guidance; a qualified engineer should confirm loads, spans and fixings.

What can I use instead of fiberglass grating?

Options · Choose it if

FRP is the best choice where chemicals, salt or electricity would attack or endanger metal, but other gratings sometimes fit better. galvanised steel grating is stronger, cheaper per m² and better for vehicles and long spans in dry areas. stainless steel grating suits hygienic food and pharma floors and seafront sites where looks matter. aluminium grating is light and non-sparking for rooftops and architectural walkways. Solid FRP or chequered plate suits floors where nothing must drop through. Saudigrate and Arabian Gratings supply all of these, so you can compare on one quote.

AlternativeChoose it ifWatch out for
Galvanised steel gratingHeavy loads, vehicles, long spans, dry areasRusts in chemical and splash zones
Stainless steel gratingFood, pharma and seafront sitesMuch higher price
Aluminium gratingLight, non-sparking rooftop walkwaysConducts electricity; check loads
Covered FRP or chequered plateNothing must drop throughHolds water and sand on top

How do I maintain fiberglass grating and fix common problems?

Symptom · Cause · Fix

FRP grating needs very little care: no painting and no rust treatment. Wash it with water and mild detergent to clear dust and oil, check the clips once or twice a year, and look for fading or worn grit on outdoor panels. Most problems come from loose clips, sand, sun damage or loads above the panel's rating. If you see fibres on the surface, ask the supplier about a UV coating or replacement panels. The table lists the common problems and fixes.

SymptomLikely causeFix
Panels rock or rattleMissing clips or uneven supportsRefit clips; pack or level supports
Surface fading or fibres showingUV exposure without protectionAsk the supplier about UV coating or replacement
Grit worn smoothHeavy foot traffic or cleaningRe-grit the surface or replace panels in that area
Openings blocked with sandWind-blown sand and debrisLift panels and clean; plan regular cleaning
Panel cracked or saggingLoad above rating or dropped equipmentReplace panel; check the load table and span

Have a technician confirm the cause before buying replacement panels.

What should I check before ordering fiberglass grating?

Checklist · Mistakes

Have these answers ready before you ask for quotes. A complete brief gets a firm price on the first reply and stops you comparing a cheap polyester panel against a chemical-grade vinyl ester one. Send the layout drawing, say whether panels should be cut to size, and ask for the load table at your span, the resin data and fire test report. Send the same list to two or three suppliers so every quote is on the same basis and easy to compare.

  • Moulded or pultruded, open or covered top
  • Depth and mesh or bar spacing (for example 38 mm, 38 x 38 mm or I-6015)
  • Resin: isophthalic polyester, vinyl ester or phenolic, plus UV protection outdoors
  • Span between supports, design load and allowed deflection
  • Area in m², panel sizes or layout drawing, number of cut-outs
  • Certificates: ASTM E84, ISO 9001, BS 4592-4, load test report
  • Clips, nosings, stair treads, delivery city and date
MistakeWhat happensDo this instead
Using steel span tables for FRPPanels sag and bounceUse the FRP maker's load table
Choosing polyester for strong chemicalsSurface softens and fibres showSpecify vinyl ester
Leaving cut edges rawMoisture and chemicals get into the fibresSeal every cut edge with resin
No UV protection outdoorsPanels fade and chalk in the sunAsk for UV inhibitors and a surface veil

What do people ask about fiberglass grating in KSA?

FAQ

Is FRP the same as GRP grating?

Yes. FRP (fibre-reinforced plastic) and GRP (glass-reinforced plastic) describe the same product: glass fibres set in a hard resin. Suppliers use the two names, and "fiberglass grating", interchangeably; FRP is common in American and Aramco specs, and GRP in British and Gulf specs. What actually changes performance is whether the panel is moulded or pultruded, which resin it uses (polyester, vinyl ester or phenolic), and its depth and mesh. Compare those details when you look at quotes, not the name used.

Is fiberglass grating strong enough for walkways?

Yes, for pedestrian walkways and platforms, as long as the depth and span match the supplier's load table. A 38 mm moulded panel is the usual choice where supports are up to about 1 m apart, and pultruded grating such as the 38 mm I-6015 handles longer spans and heavier loads. FRP bends more than steel, so the limit is usually how much it sags rather than breaking strength. For forklifts or trucks, ask for a heavy-duty pultruded panel or use steel in that area.

Does fiberglass grating conduct electricity?

No. FRP grating does not conduct electricity and does not spark, which is why it is chosen for substations, switch rooms, cable trenches, battery rooms and hazardous oil and gas areas. Steel, stainless and aluminium grating all conduct, so they need earthing near live equipment. FRP covers over cable trenches are a common use in Saudi utilities. Check the fire rating too, because electrical areas often also need fire-retardant resin with an ASTM E84 Class 1 result from a recognised lab.

Does fiberglass grating fade in the Saudi sun?

It can. Strong UV slowly breaks down the resin surface, causing fading, chalking and eventually exposed fibres if the panel has no UV protection. For outdoor use in Saudi Arabia, ask for resin with UV inhibitors and a surface veil, and check the resin is rated above the panel's summer surface temperature, which can pass 70 °C on dark colours. Lighter colours stay cooler. If panels start to show fibres, ask the supplier about a UV coating or replacement panels.

Which suppliers list FRP grating in KSA?

Five suppliers list FRP grating on fyind KSA: Saudigrate (Jeddah, +966 50 196 4303) with the 38 mm I-6015 pultruded panel; Arabian Gratings (Jeddah, +966 12 647 3020) with the 25 mm I-4010; Busubait Fiberglass Company (Dammam, +966 13 834 4489) with moulded grating and custom platforms; Spark Fiber Glass (Dammam and Al Khobar, +966 55 890 0952) with moulded and pultruded grating; and Al Noor International Industrial Company (Al Kharj, +966 50 867 5490), which also offers GRP fabrication and repair.

Which companies list fiberglass grating on fyind KSA?

Saudigrate, Arabian Gratings, Busubait Fiberglass Company, Spark Fiber Glass and Al Noor International Industrial Company all list fiberglass grating on fyind KSA. The two Jeddah companies also list steel, stainless and aluminium grating, so they can supply mixed packages. Busubait and Spark are FRP manufacturers in the Eastern Province, and Al Noor adds GRP fabrication and repair near Riyadh. Each has a supplier card on this page with its address, phone, email, opening hours, Google rating and the grating products it lists.

Do fiberglass grating suppliers publish prices?

No. None of the five suppliers publishes prices, and the fyind product cards show a price of 0. As a guide, factory prices are about SAR 130–190 per m² for 25 mm moulded polyester, SAR 170–245 for 38 mm moulded polyester, SAR 225–320 for 38 mm vinyl ester, and SAR 190–355 for 38 mm pultruded panels, before freight, customs and VAT. Send the same specification to two or three suppliers and ask for each cost, including delivery, on a separate line.

How do I contact a fiberglass grating supplier?

Call or email the supplier directly, or use Send Enquiry on its fyind profile. Saudigrate is on +966 50 196 4303, Arabian Gratings on +966 12 647 3020, Busubait Fiberglass on +966 13 834 4489, Spark Fiber Glass on +966 55 890 0952 and Al Noor International on +966 50 867 5490. Have the grating type, depth, resin, area, span, load and delivery city ready, and email your drawing after the call so the quote covers cut panels and clips.

Which other grating categories should I explore?

Grating types · Hub

Apart from fiberglass grating, you can explore other grating categories available from Assaf Industry Company and other suppliers in KSA. Visit the grating hub to compare all 18 grating categories and find suitable options for your requirements.

Suppliers For Other grating categories

Find Suppliers for Different Types of Grating

Popular Categories