Brazing Rod Suppliers in KSA - Copper, Silver, Bronze, Flux-Coated and Flexible Rod Options for HVAC, Automotive and Industrial Work
Searching for brazing rod suppliers in KSA usually comes down to one question first: which alloy actually matches the base metal and the joint conditions? A phosphorus-copper rod that self-fluxes beautifully on copper-to-copper HVAC lines is the wrong choice for a galvanized steel frame, and a bare rod with no coating will not behave like a flux-coated stick on a dirty repair joint. This guide covers copper, silver, aluminium, low-fuming bronze and specialty brazing rods sold in the Saudi S rabia - Harris, Castolin, BERNZOMATIC and general-purpose rods - with AWS, ASME, ISO and NSF standards, brazing rod price in KSA, and named suppliers across Riyadh and Jeddah.
Brazing Rod & Welding Rod in KSA Specification
Phos-Copper Rods · Copper-to-Copper HVAC and Refrigeration | Silver-Bearing Rods · Vibration and Loose-Fit Joints | Low-Fuming Bronze · Steel, Cast Iron and Dissimilar Metals
Eight brazing rod categories cover the bulk of HVAC, automotive, plumbing and industrial fabrication work across the Kingdom. Each one below names the exact alloy configuration that suits the job, why that configuration is correct for it, an indicative price, and which brazing rod supplier in KSA carries it.
Phos-Copper Brazing Rods for Copper-to-Copper Joints - HVAC, Refrigeration and Plumbing Work
- •Rod type: 0% silver phosphorus-copper rod, such as Harris 0 (Org Harris Copper Rod), classified BCuP-2 under AWS A5.8
- •Why it suits: Self-fluxing on copper-to-copper joints, so no separate flux is needed - the standard, lowest-cost pick for refrigerant lines and copper pipe joining where fit-up is reasonably close
- •Price: SAR 45-90 per kg, depending on diameter and pack format
- •Where to buy: Ayub First Trading Company (Riyadh), Tarek Nasser Alakeel Company (Jeddah)
Silver-Bearing Phos-Copper Rods for HVAC and Refrigeration - Loose Fit-Up and Vibration Resistance
- •Rod type: Phos-copper-silver alloy such as Harris Stay-Silv (2%, 5%, 6% or 15% silver), classified BCuP-3/BCuP-5/BCuP-6 under AWS A5.8
- •Why it suits: A wider melting range than a 0% silver rod lets it fill loose connections and cap the finished joint - correct wherever thermal expansion, vibration, or an imperfect fit-up rules out a straight phos-copper rod
- •Price: SAR 350-950 per kg depending on silver content, since silver is priced by weight in the alloy
- •Where to buy: Ayub First Trading Company (Riyadh, Harris Brazing Rod AFTC HARRIS range), Tarek Nasser Alakeel Company (Jeddah)
High-Silver and Specialty Brazing Alloys for Stainless Steel and Heat Exchanger Repair
- •Rod type: High-silver BAg-series alloy (roughly 45-56% silver) for ferrous and non-ferrous joints
- •Why it suits: A phos-copper rod is not recommended on stainless steel since it lacks joint ductility on ferrous metals - a high-silver rod is the correct pick for stainless, heat exchangers, and food-service equipment
- •Price: SAR 900-2,000+ per kg, moving closely with the silver spot price
- •Where to buy: Ayub First Trading Company (Riyadh, Harris High Silver / Specialty Alloys), Tarek Nasser Alakeel Company (Jeddah)
Low-Fuming Bronze Rods for Steel, Cast Iron and Galvanized Tubing
- •Rod type: Copper-zinc low-fuming bronze, classified RBCuZn under AWS A5.8, sometimes called a braze-welding alloy
- •Why it suits: Minimal capillary action limits it to lap, tee and butt joints but makes it the correct filler for steel, cast iron and galvanized steel tubing - exactly the vehicle chassis, tubular frame and locks work Harris rods are marketed for in KSA
- •Price: SAR 60-140 per kg, depending on diameter and flux coating
- •Where to buy: Ayub First Trading Company (Riyadh), Tarek Nasser Alakeel Company (Jeddah)
Bare Rods for Precision Joints - Castolin 18 Bare and Similar Uncoated Copper Alloys
- •Rod type: Uncoated bare copper-alloy rod, such as Castolin 18 - Bare rod
- •Why it suits: No flux residue to clean off, so it is the right pick where the joint is already clean and close-fitting, or where a separate paste/powder flux is preferred for better control
- •Price: SAR 55-110 per kg
- •Where to buy: Tarek Nasser Alakeel Company (Jeddah, EUTECTIC CASTOLIN range)
Flexible Rods for Tubular Assemblies - Castolin 18 XFC and Similar Flexible Filler Metals
- •Rod type: Flexible copper-alloy rod, such as Castolin 18 XFC, that bends around a joint before brazing rather than staying rigid
- •Why it suits: Bends to fit awkward tubular assemblies and repair points that a straight rigid rod cannot follow - correct for vehicle chassis and tubular frame maintenance where access is tight
- •Price: SAR 65-130 per kg
- •Where to buy: Tarek Nasser Alakeel Company (Jeddah)
Flux-Coated Rods for Field Repair - Castolin 18 MF and Minimal-Flux Coated Alloys
- •Rod type: Flux-coated copper-alloy rod carrying just enough flux to run the joint, such as Castolin 18 MF
- •Why it suits: Removes the extra step of brushing on paste flux, which matters on a maintenance call where speed and a light toolkit are the priority - the minimal-flux design also limits residue that would otherwise need cleaning off brass and bronze parts
- •Price: SAR 70-140 per kg
- •Where to buy: Tarek Nasser Alakeel Company (Jeddah)
Blue Rod Brazing Rods for HVAC Contractors and Refrigeration Technicians
- •Rod type: Branded silver-bearing "Blue Rod" phos-copper-silver alloy marketed specifically to the HVAC and refrigeration trade
- •Why it suits: Functions as a mid-to-high silver phos-copper rod in practice, but is stocked and packaged specifically for field technicians running daily copper-to-copper refrigerant line work
- •Price: SAR 350-800 per kg depending on silver content and pack size
- •Where to buy: Ayub First Trading Company (Riyadh), Cool Plus Trading EST. (Riyadh, for the matching copper fittings and pipe accessories)
Types of Brazing Rods Available in Saudi Arabia - Copper, Silver, Aluminium, Steel and Specialty Constructions
Six alloy-family categories are stocked by brazing rod suppliers in KSA - the detail below decides joint strength, flow behaviour, and total cost per joint.
Copper-Based Rods for Copper, Brass and Tubular Assemblies
- •Construction: Phosphorus-copper alloy, self-fluxing on copper-to-copper, BCuP-2 class
- •Why it suits: The lowest-cost option for the largest single category of work - copper pipe joining, brass and bronze plumbing, and tubular assemblies
- •Caution: Not recommended if the braze is exposed to sulfur or sulfur compounds in service, and unsuitable for ferrous metals due to poor joint ductility
- •Price: SAR 45-90/kg | Where to buy: Ayub First Trading Company, Tarek Nasser Alakeel Company
Silver-Based Rods for HVAC, Refrigeration and Vibration-Prone Joints
- •Construction: Phos-copper-silver alloy at 2%, 5%, 6% or 15% silver content, BCuP-3/5/6 class
- •Why it suits: Higher silver content widens the melting range and improves joint ductility under thermal cycling - the industry standard for AC and refrigeration copper-to-copper connections
- •Silver content trade-off: Higher silver percentage costs more per kg but tolerates a looser fit-up and higher service vibration
- •Price: SAR 350-950/kg | Where to buy: Ayub First Trading Company, Tarek Nasser Alakeel Company
Aluminium Brazing Rods for Lightweight Metal and HVAC Coil Assemblies
- •Construction: Aluminium-silicon filler alloy (e.g. 4047-type composition), engineered for aluminium-to-aluminium and aluminium-to-copper joints
- •Why it suits: Aluminium components are increasingly common in HVAC coils and lightweight assemblies where a copper-based rod simply will not wet the base metal
- •Note: Part of the Harris Brazing Rod AFTC HARRIS range covering aluminium alloys alongside the copper and silver series
- •Price: SAR 150-400/kg | Where to buy: Ayub First Trading Company
Steel and Low-Fuming Bronze Rods for Frames, Tubes and Fabricated Components
- •Construction: Copper-zinc low-fuming bronze, RBCuZn-C class, used with an oxy-fuel process
- •Why it suits: Correct for steel, malleable and grey cast iron repair and fabrication where a copper-based rod is not rated for the base metal
- •Joint design note: Minimal capillary action restricts the design to lap, tee and butt joints, with beveled edge preparation on butt joints
- •Price: SAR 60-140/kg | Where to buy: Tarek Nasser Alakeel Company, Ayub First Trading Company
Specialty and High-Silver Alloys for Stainless Steel and Industrial Repairs
- •Construction: High-silver BAg-series alloy, roughly 45-56% silver, for ferrous and non-ferrous base metals
- •Why it suits: Premium-quality joints on stainless steel and food-service equipment where a phos-copper rod's lack of ductility on ferrous metals rules it out
- •Price: SAR 900-2,000+/kg | Where to buy: Ayub First Trading Company
Flexible and Minimal-Flux Rods for Field Maintenance and Repair
- •Construction: Castolin 18-series copper alloy in bare, flexible (XFC), or minimal-flux-coated (MF) form
- •Why it suits: The flexible XFC variant bends to fit awkward tubular repairs; the MF variant carries just enough flux for a fast field joint without a separate flux step
- •Price: SAR 55-140/kg depending on variant | Where to buy: Tarek Nasser Alakeel Company
Brazing Rod Applications in Saudi Arabia - HVAC, Automotive, Plumbing and Industrial Metal Joining
Brazing rods sit at the center of HVAC installation, automotive repair, plumbing and general fabrication work across the Kingdom. Matching the alloy to the base metal and joint condition - not just picking "a brazing rod" - is what determines whether the joint holds under vibration and thermal cycling.
| Application |
Recommended Rod |
What to Consider |
| HVAC and refrigeration | Silver phos-copper rods (Stay-Silv / Blue Rod) | Alloy composition, joint temperature and base-metal compatibility |
| Copper pipe joining | 0% silver phos-copper rods (Harris 0) | Copper compatibility, joint strength and filler flow |
| Brass and bronze repair | Copper-based rods, Castolin 18 series | Base-metal compatibility and alloy composition |
| Galvanized steel tubing | Harris Brazing Rod AFTC HARRIS range | Surface preparation, heat control and filler compatibility |
| Automotive chassis and tubular assemblies | Copper-based and low-fuming bronze rods | Joint strength and material compatibility |
| Heat exchanger repair | High-silver and specialty alloys | Operating temperature and joint integrity |
| Plumbing and pipework | Copper and silver brazing rods | Filler flow, joint strength and service conditions |
| Industrial maintenance | Specialty and low-fuming bronze rods | Material, temperature and application requirements |
HVAC and Refrigeration - Silver Phos-Copper Rods for Copper-to-Copper Line Sets
- •Rod type: Silver-bearing phos-copper rod (5%, 6% or 15% silver) or a branded Blue Rod equivalent
- •Why it suits: Self-fluxing on copper, tolerant of the vibration and thermal cycling every refrigerant line experiences in service, and the industry-recognized choice for AC and refrigeration technicians
- •Price: SAR 350-950/kg | Where to buy: Ayub First Trading Company, Cool Plus Trading EST.
Automotive Chassis, Locks and Tubular Assemblies - Copper and Low-Fuming Bronze Rods
- •Rod type: Copper-based brazing rod for brass/bronze fittings, low-fuming bronze for steel chassis tube and lock repair
- •Why it suits: Vehicle chassis, tubular assemblies, vehicle bodies, and locks combine copper-alloy hardware with steel structure, so the workshop typically needs both alloy families on the bench
- •Price: SAR 55-140/kg | Where to buy: Tarek Nasser Alakeel Company, Ayub First Trading Company
Plumbing and Pipework - Copper and Silver Rods for Zinc-Coated and Galvanized Piping
- •Rod type: Copper-based rod for copper pipe runs, Harris Brazing Rod AFTC HARRIS range for zinc-coated and galvanized profiles
- •Why it suits: Ideal for joining galvanized steel tubes, tubular frames and brass plumbing fixtures where the pipe surface finish affects flux behaviour and heat control
- •Price: SAR 45-140/kg | Where to buy: Ayub First Trading Company, Tarek Nasser Alakeel Company
Heat Exchangers and Industrial Maintenance - Specialty and Steel Brazing Alloys
- •Rod type: High-silver BAg-series or low-fuming bronze, matched to the operating temperature of the equipment
- •Why it suits: Heat exchanger and industrial repair joints see repeated thermal cycling, so the filler metal's service temperature range and joint integrity matter more than initial cost
- •Price: SAR 60-2,000+/kg depending on alloy family | Where to buy: Ayub First Trading Company, Tarek Nasser Alakeel Company
Brazing Rod Product Specifications in Saudi Arabia - Alloy Composition, Melting Range, Length and Standards
Org Harris Copper Rod Specifications - 0% Silver Phos-Copper for Copper, Brass, Bronze and Galvanized Steel
Material: Phosphorus-copper (0% silver) | AWS Class: BCuP-2 | Form: Rod, available configurations | Suitable Materials: Copper, brass, bronze, galvanized steel | Suitable For: Vehicle chassis, tubular assemblies, vehicle bodies, zinc-coated piping and profiles
Available From: Ayub First Trading Company · Tarek Nasser Alakeel Company
Harris Brazing Rod AFTC HARRIS Specifications - Multi-Alloy Series Across Copper, Silver, Aluminium and Specialty Metals
Alloy series: Harris 0 (Cu-P, 0% Ag), Harris Stay-Silv alloys, Harris High Silver / Specialty Alloys, Harris Aluminum Brazing Alloy Rods | Length: 18 in (457 mm) | Standards: AMS 4763, ISO 17672, ANSI/AWS A5.8, ASME SFA 5.8, QQ-B-654A Class BAg-7, NSF 51 | Suitable Materials: Copper, stainless steel, aluminium and specialty metals
Available From: Ayub First Trading Company (Riyadh)
Eutectic Castolin 18 Series Specifications - Bare, Flexible (XFC) and Minimal-Flux (MF) Copper Alloy Rods
Alloy: Castolin 18 copper-based filler metal | Forms: Bare rod, flexible rod (XFC), flux-coated with minimal flux quantity (MF) | Suitable For: Tubular assemblies, metal component repair and maintenance | Key distinction: XFC bends to fit awkward joints; MF minimizes flux cleanup on field repairs
Available From: Tarek Nasser Alakeel Company (Jeddah, EUTECTIC CASTOLIN dealer)
Eutectic Castolin 146 XFC Specifications - Higher-Temperature Flexible Brazing Rod
Alloy: Castolin 146 XFC | Brazing Temperature: 885–905°C | Form: Flexible rod | Suitable For: Industrial maintenance and fabrication joints needing a higher brazing temperature than the standard 18 XFC alloy
Available From: Tarek Nasser Alakeel Company (Jeddah)
BERNZOMATIC Brazing Alloy Rod Specifications - General Plumbing, HVAC and Metal Joining
Product Type: BERNZOMATIC Brazing Alloy Rod | Form: Rod, alloy-dependent | Suitable For: Plumbing, HVAC and general metal joining, portable torch use
Available From: Ayub First Trading Company · Cool Plus Trading EST. (for compatible fittings and torch accessories)
Brazing Rod Sizes and Diameters in Saudi Arabia - Choosing the Right Diameter and Length for the Joint
| Diameter / Format |
Typical Rod Type |
Best Used For |
Price (SAR/kg) |
| 1/16 in (1.6 mm) | Phos-Copper Rod (0% Ag) | Small-bore copper tube, fine joints | 45-90 |
| 3/32 in (2.4 mm) | Phos-Copper-Silver Rod (5-15% Ag) | Standard HVAC/refrigeration line sets | 350-950 |
| 1/8 in (3.2 mm) | General-Purpose Copper or Silver Rod | General fabrication, plumbing, automotive | 55-500 |
| 3/16 in (4.8 mm) | Low-Fuming Bronze Rod | Heavier steel and cast-iron fabrication | 70-140 |
| 18 in (457 mm) length | Harris Brazing Rod AFTC HARRIS range | Standard stick length across the alloy series | Varies by alloy |
Brazing Rod Standards and Certifications in Saudi Arabia - AWS, ASME, ISO, AMS and NSF Requirements
Compliance Reference
Filler Metal Standards and Certification
Brazing rods used in HVAC, automotive and industrial work in Saudi Arabia are specified against a small set of internationally recognized standards. They classify the filler metal by alloy family and melting behaviour rather than by brand, so the classification code on the pack, not the trade name, is what a project spec actually calls for.
AWS A5.8 / ANSI-AWS A5.8 (American Welding Society)
Specification for Filler Metals for Brazing and Braze Welding. Classifies rods by prefix and number - BCuP for phosphorus-copper and phos-copper-silver alloys (BCuP-2 through BCuP-6), BAg for silver alloys, and RBCuZn for low-fuming bronze - so the class code tells you the base-metal compatibility and silver content before you even check the datasheet.
ASME SFA 5.8
The ASME-adopted version of the AWS A5.8 filler metal specification, referenced on procurement specs for boiler, pressure-equipment and industrial fabrication work where ASME code compliance is required alongside AWS classification.
QQ-B-654A (Federal Specification)
A US federal specification for silver brazing alloys, still referenced on older and government-linked procurement documents alongside the current AWS class - for example QQ-B-654A Class BAg-7 for high-silver alloys and QQ-B-654A BCuP-5 for the 15% silver phos-copper alloy.
ISO 17672
The international standard for brazing filler metals, giving a classification system that maps closely to AWS A5.8 for buyers sourcing rods internationally or reconciling specs written to different regional standards.
AMS 4763
An aerospace material specification for silver brazing filler metal, referenced where a project spec calls for aerospace-grade material traceability on a brazed joint rather than a standard commercial-grade rod.
NSF 51
Certification for materials used in food equipment - relevant when a brazed joint (such as a stainless steel heat exchanger or food-service fitting) will contact food, since not every brazing alloy is rated safe for that contact.
Buying rods that carry the correct classification for the job - not just "a Harris rod" or "a Castolin rod" - is what keeps a brazed joint defensible on a safety audit or a warranty claim.
Buyer Checklist
Features to Look for in a Brazing Rod
Beyond the alloy family, a few practical details decide whether a rod performs on a Saudi jobsite:
- ✓Correct AWS/ASME classification for the base metal being joined, not just a brand name
- ✓Silver content matched to the joint's fit-up and vibration exposure - higher silver for looser or higher-vibration joints
- ✓Bare, flexible or flux-coated form matched to how the rod will actually be used in the field
- ✓Melting/brazing temperature range that fits the base metal without overheating adjacent components
- ✓Stick length and diameter matched to the torch and joint size on hand
- ✓NSF 51 or food-contact certification where the joint will touch food or potable water
For stainless steel and ferrous metals, a high-silver BAg alloy is preferred over a standard phos-copper rod, since phos-copper alloys are not recommended for brazing steel due to insufficient joint ductility.
Brazing Rod Suppliers in KSA - Verified Suppliers for HVAC, Automotive, Plumbing and Industrial Brazing Materials
Four verified suppliers across Riyadh and Jeddah, covering brazing rods, welding electrodes, and the HVAC/electrical equipment used alongside them.
Brazing Rod and Welding Electrode Specialist in Saudi Arabia - EUTECTIC CASTOLIN Range
Tarek Nasser Alakeel Company (Jeddah) is the strongest single option among the suppliers covered here for named brazing rod products, stocking the EUTECTIC CASTOLIN 18 XFC and Castolin 146 XFC flexible brazing rods alongside EutecTrode welding electrodes, thermal spray powder and steel plate - useful for a buyer who wants brazing consumables and the base steel stock from one account.
AFTC-Brand Harris Brazing Rod and HVAC Parts Distributor - Riyadh
Ayub First Trading Company (Riyadh) distributes the full Harris Brazing Rod AFTC HARRIS series - Harris 0, Stay-Silv, High Silver/Specialty, and Aluminum Brazing Alloy Rods - alongside its own AFTC-branded line of HVAC and refrigeration parts (motors, capacitors, contactors, solenoid valves, air curtains). For a contractor sourcing brazing rod and the AC/refrigeration components it will be brazed into on the same purchase order, this is a one-stop route.
HVAC Copper Fittings and Joint-Prep Accessories - Riyadh
Cool Plus Trading EST. (Riyadh) stocks the copper fittings, flare nuts, pipe adaptors, swaging tools and pressure gauges that go alongside a brazing rod on almost every HVAC and refrigeration line-set job - a practical companion source when the brazing rod order also needs joint-prep hardware.
Industrial Electrical Equipment for Fabrication and Boiler Welding - Riyadh
HARMATEK (Riyadh) is a verified supplier of circuit breakers, contactors and variable frequency drives used on the fabrication floor and control panels around boiler and pressure-equipment welding lines - relevant to buyers assembling a full workshop order that spans brazing/welding consumables and the electrical control gear that runs alongside them. Full contact details are below.
Tarek Nasser Alakeel Company — Brazing Rod, Welding Electrode and Thermal Spray Supplier, Jeddah KSA
JEDDAH · Al Aswad bin Zameih Street, Al Khalidiyyah · Verified Supplier · EUTECTIC CASTOLIN Dealer
Phone: +966 12 690 1230 | Address: Al Aswad bin Zameih Street, Al Khalidiyyah, Jeddah, KSA
Products They Offer
Brazing Rod Types
A branded EUTECTIC CASTOLIN dealer stocking flexible and standard copper-alloy brazing rods across two brazing-temperature grades, plus the welding electrodes and steel stock used on the same jobs.
- Named-brand brazing rod stock: Castolin 18 XFC and 146 XFC are listed as hot-selling and new-arrival products, not a generic catalogue entry.
- One-account sourcing: Brazing rod, welding electrode, thermal spray powder and steel plate all under a single supplier account.
- Verified Supplier status: An independently verified listing on the sourcing platform.
- Business type: Trading company — brazing rod, welding electrode and metal repair consumables.
Best for: Jeddah fabricators and maintenance teams who need named-brand flexible brazing rods (Castolin 18 XFC / 146 XFC) alongside welding electrodes and repair consumables from one Western Region account.
Ayub First Trading Company — Harris AFTC Brazing Rod and HVAC/Refrigeration Parts Distributor, Riyadh KSA
RIYADH · 7179 Al Imam Malik Road, Badr District 2646 · Verified Supplier · AFTC-Brand Harris Brazing Rod Dealer
Phone: +966 55 820 7778 | Mobile: +966 56 004 2170 | Address: 7179 Al Imam Malik Road, Badr District 2646, Riyadh, KSA
Products They Offer
- Org Harris Copper Rod — 0% silver phos-copper brazing rod for galvanized steel tubes, vehicle bodies, brass and bronze.
- Harris Brazing Rod AFTC HARRIS — full alloy series spanning Harris 0, Stay-Silv, High Silver/Specialty and Aluminum Brazing Alloy Rods to AMS 4763, ISO 17672, ANSI/AWS A5.8, ASME SFA 5.8, QQ-B-654A and NSF 51 standards.
- Axial Fan Motor AFTC AFMO 002 & Air Conditioner Contactor AFTC CTN 102 — AFTC-branded HVAC and refrigeration parts sold alongside the brazing rod range.
- Air Conditioner Capacitor 25 µF & Air Curtain (AFTC Series) — further AFTC-brand HVAC stock for the same technician customer base.
Brazing Rod Types
The broadest single-supplier brazing rod catalogue among the four covered here - copper, silver, aluminium and specialty alloys under one Harris-branded AFTC line, sold alongside the HVAC/refrigeration hardware a technician braces into the same job.
- Full Harris alloy range: Copper, silver, high-silver/specialty and aluminium brazing rods under one AFTC-branded account, standards-documented to AMS, ISO, AWS, ASME, QQ-B-654A and NSF.
- HVAC parts crossover: Also stocks AFTC-brand motors, capacitors, contactors, solenoid valves and air curtains - useful for a technician placing one order for both the brazing rod and the part it's being brazed into.
- Verified Supplier status: An independently verified listing gives buyers extra confidence before ordering.
- Business type: Trading company — Harris brazing rod distributor and AFTC-brand HVAC/refrigeration parts.
Best for: Riyadh HVAC and refrigeration contractors who want the full Harris brazing rod alloy range and the AC/refrigeration parts it joins, from a single AFTC-branded account.
Cool Plus Trading EST. — HVAC Copper Fittings and Brazing Joint-Prep Supplier, Riyadh KSA
RIYADH · Asad Ibn Al Fourat, Al Amal · Verified Supplier · HVAC/Refrigeration Accessories Stockist
Phone: +966 11 401 2051 | Mobile: +966 54 343 2650 | Address: Asad Ibn Al Fourat, Al Amal, Riyadh, KSA
Products They Offer
Brazing Rod Types
Not a primary brazing rod stockist by catalogue, but the standard companion source for the copper fittings, flare nuts and swaging tools every HVAC/refrigeration brazing job also needs.
- Joint-prep completeness: Flare nuts, pipe adaptors, swaging tools and vibration isolators cover the hardware side of a brazed refrigerant line, not just the filler metal.
- Verified Supplier status: An independently verified listing on the sourcing platform.
- Business type: Trading establishment — HVAC and refrigeration fittings and accessories.
Best for: HVAC and refrigeration contractors who need the copper fittings, flare nuts and swaging tools that go with a brazed joint, sourced from the same Riyadh account as the rest of the line-set hardware.
HARMATEK — Industrial Electrical Equipment for Fabrication and Boiler Welding Sites, Riyadh KSA
RIYADH · Prince Mohammed Bin Abdulrahman Bin Abdulaziz Road · Verified Supplier · Circuit Breaker, Contactor & VFD Stockist
Phone: +966 55 947 1701 | Mobile: +966 54 802 2461 | Address: Prince Mohammed Bin Abdulrahman Bin Abdulaziz Road, Riyadh, KSA
Products They Offer
Brazing Rod Types
Not a brazing rod stockist by catalogue - an electrical control equipment supplier whose circuit breakers, contactors and VFDs sit on the same boiler and pressure-equipment fabrication lines where brazing and welding consumables are used. Contact directly for current brazing/welding consumable stock.
- Verified Supplier status: An independently verified listing on the sourcing platform.
- Industrial control focus: Circuit breakers, contactors and VFDs used on fabrication and boiler-welding lines.
- Business type: Trading company — industrial electrical control equipment.
Best for: Buyers assembling a full workshop or boiler-fabrication order who need the electrical control gear (breakers, contactors, VFDs) alongside their brazing and welding consumable order, and want to confirm current brazing rod stock directly with the supplier.
Quick Brazing Rod Selection Guide in Saudi Arabia - Match the Job to the Right Alloy
Brazing Rod Price in Saudi Arabia - Factors Affecting Cost of Copper, Silver, Aluminium and Specialty Alloys
Brazing Rod Price by Alloy Family - Copper, Silver, Bronze and Specialty Options
- •0% silver phos-copper (Harris 0 / Org Harris Copper Rod): SAR 45-90 per kg - the most cost-effective option for close-fit copper-to-copper work
- •Silver-bearing phos-copper (Stay-Silv, Blue Rod): SAR 350-950 per kg - price rises directly with silver content
- •High-silver / specialty BAg alloys: SAR 900-2,000+ per kg, moving closely with the silver spot price - confirm current pricing with the supplier before ordering in volume
Brazing Rod Price by Form - Bare, Flexible and Flux-Coated Rods
- •Bare rod (Castolin 18 Bare): SAR 55-110 per kg - lowest cost per kg within the same alloy family
- •Flexible rod (Castolin 18 XFC / 146 XFC): SAR 65-130 per kg - the flexibility adds a modest premium over bare stock
- •Minimal-flux-coated rod (Castolin 18 MF): SAR 70-140 per kg - the coating saves a separate flux-application step on field repairs
Brazing Rod Price by Diameter and Pack Format
- •Fine diameters (1/16 in): priced per kg like standard stock, with less material per stick
- •Standard HVAC diameters (3/32-1/8 in): the most commonly stocked sizes, priced at the base per-kg rate for the alloy
- •Bulk box/tube packaging: generally the best per-kg rate for contractors running consistent daily consumption - request a volume quotation directly from the supplier
Brazing Rod Storage, Handling and Safe Use in Saudi Arabia - Field and Workshop Requirements
Storing Brazing Rods to Prevent Oxidation and Flux Degradation
- •Keep rods in their original tube or box, sealed, away from humidity - flux coatings and phosphorus-copper surfaces both degrade faster in Saudi Arabia's coastal humidity in Jeddah and Dammam
- •Store silver-bearing rods separately and clearly labeled by alloy - a mixed box makes it easy to grab the wrong silver content for a critical joint
- •Keep flux-coated rods (MF variants) away from direct heat in storage, since the coating itself is temperature-sensitive
Matching Torch, Flux and Joint Clearance to the Rod
- •Use a neutral oxy-acetylene flame where specified - excessive oxygen increases surface oxides and inhibits metal wetting on copper joints
- •Apply flux sparingly and only where the alloy is not self-fluxing - phos-copper rods are self-fluxing on copper-to-copper but still need flux for copper-to-brass
- •Respect the recommended joint clearance for the alloy (typically 0.05-0.15 mm for phos-copper rods) - too wide a gap defeats capillary flow regardless of alloy quality
Ventilation and Personal Protection During Brazing
- •Use adequate ventilation or local exhaust at the flame to keep fumes and gases out of the breathing zone, particularly with cadmium-free but still fume-generating silver alloys
- •Wear correct eye, ear and body protection for oxy-fuel or induction brazing, matching the heat source in use
- •Read the manufacturer's Safety Data Sheet and the employer's safety practices before switching to an unfamiliar alloy family, since fume composition differs between copper, silver and bronze rods
FAQs - Brazing Rods in Saudi Arabia
What are the different types of brazing rods?
The main families are 0% silver phos-copper (Harris 0), silver-bearing phos-copper (Stay-Silv, 2-15% silver), high-silver BAg specialty alloys (45-56% silver) for stainless steel, low-fuming bronze for steel and cast iron, and aluminium alloys for aluminium-to-aluminium joints. Within the copper family, rods also come bare, flexible (XFC), or minimal-flux-coated (MF).
What is a blue brazing rod used for?
A "Blue Rod" is a branded silver-bearing phos-copper alloy marketed specifically to HVAC contractors and refrigeration technicians for copper-to-copper line-set work. It behaves like a mid-to-high silver phos-copper rod in practice, self-fluxing on copper and tolerant of the vibration and thermal cycling refrigerant lines see in service.
Why are Blue Rod brazing rods used by HVAC contractors and refrigeration technicians specifically?
HVAC and refrigeration technicians brace daily copper-to-copper connections on refrigerant lines that experience continuous vibration and thermal cycling in service. A silver-bearing rod handles that combination better than a 0% silver rod, and Blue Rod products are packaged and priced specifically for that trade's daily consumption pattern.
What are silver brazing rods used for in HVAC and refrigeration?
Silver-bearing phos-copper rods (classified BCuP-3, BCuP-5 or BCuP-6 under AWS A5.8) are the industry standard for AC and refrigeration copper-to-copper brazing. The silver widens the melting range so the rod flows into looser connections and tolerates vibration and thermal expansion better than a 0% silver alloy.
What is the price of silver brazing rods per kilogram?
Indicative pricing runs roughly SAR 350-950 per kg depending on silver content (2% up to 15%), since the alloy's silver percentage is priced by weight. High-silver specialty alloys (45-56% silver) for stainless steel run considerably higher, SAR 900-2,000+ per kg. Silver-linked pricing moves with the metals market, so confirm current pricing directly with the supplier before a bulk order.
Who supplies Harris brazing rods in Saudi Arabia?
Ayub First Trading Company (Riyadh) distributes the Harris Brazing Rod AFTC HARRIS range, covering Harris 0, Stay-Silv, High Silver/Specialty and Aluminum Brazing Alloy Rods to AMS 4763, ISO 17672, ANSI/AWS A5.8, ASME SFA 5.8, QQ-B-654A and NSF 51 standards.
What is the difference between a brazing rod and a welding electrode?
A brazing rod is a filler metal melted at a lower temperature than the base metal, joining parts through capillary action without melting the base metal itself - copper, silver and aluminium alloys are typical. A welding electrode (such as the EutecTrode XHD 2230 stocked by Tarek Nasser Alakeel Company) melts and fuses with the base metal directly at a much higher temperature, producing a fundamentally different joint. The two are not interchangeable for the same repair.
What is the difference between a bare, flexible (XFC) and flux-coated (MF) brazing rod?
A bare rod carries no coating and is used with separately-applied flux or on self-fluxing copper-to-copper joints. A flexible rod (like Castolin 18 XFC) bends to fit awkward tubular repairs before brazing. A minimal-flux-coated rod (like Castolin 18 MF) carries just enough flux on the rod itself to run a field joint without a separate flux application step, trading a small material premium for faster, lighter fieldwork.
Can phos-copper brazing rods be used on stainless steel?
No - phos-copper alloys, including Harris 0 and Stay-Silv, are not recommended for brazing steel or stainless steel due to insufficient joint ductility on ferrous metals. A high-silver BAg-series specialty alloy is the correct choice for stainless steel, heat exchangers and other ferrous-metal joints.
Where can I find brazing rod suppliers near me in Saudi Arabia?
Tarek Nasser Alakeel Company (Jeddah) covers named-brand Castolin flexible brazing rods and welding electrodes for the Western Region. Ayub First Trading Company and Cool Plus Trading EST. (both Riyadh) cover the Harris AFTC brazing rod range and the HVAC copper fittings that go with it for the Central Region. HARMATEK (Riyadh) supplies the electrical control equipment used on the same fabrication and boiler-welding sites. Match location and product focus to your project city for the fastest delivery.
What standards should a brazing rod meet for industrial or HVAC use in Saudi Arabia?
Look for AWS A5.8 or ASME SFA 5.8 classification (BCuP for phos-copper/phos-copper-silver, BAg for high-silver alloys, RBCuZn for low-fuming bronze), ISO 17672 for international sourcing, AMS 4763 where aerospace-grade traceability is required, QQ-B-654A on older federal-linked specs, and NSF 51 wherever the brazed joint will contact food or potable water.
.webp)
