Welding Wire in Saudi Arabia: Products, Specifications, and Verified Suppliers
Welding wire is a continuous, consumable metal wire fed through a welding gun. It serves two functions at once: it carries the electrical arc and it acts as the filler metal that fuses the base pieces together. This page covers the wire types stocked in Saudi Arabia, the technical specifications that matter for each application, and direct supplier contacts across Riyadh, Jeddah, Dammam, Jubail, and the Eastern Province.
Quick Reference
ER70S-6 is the most stocked solid MIG wire in Saudi Arabia for general mild steel fabrication. E71T-11 is the most stocked gasless flux-cored wire. For stainless, ER308L and ER316L. For aluminium, ER4043 and ER5356. Most Saudi distributors carry Lincoln Electric, ESAB, and Hobart brands with same-week delivery across major cities.
Solid Wire vs Flux-Cored Wire: Which One Do You Need?
Solid Wire (MIG / GMAW)
Requires external shielding gas (Argon, CO2, or mixed).
Cleaner welds, less spatter, better for visible joints.
Best indoors on clean, rust-free steel, stainless, and aluminium.
Common grades: ER70S-6, ER308L, ER4043
Flux-Cored Wire (FCAW)
Flux core generates its own shielding gas as it burns.
Works outdoors, in wind, on rusty or dirty metal.
Higher deposition rate, better for structural and heavy steel.
Common grades: E71T-11, E71T-1C, E71T-GS
Which Welding Wire Types Are Stocked in Saudi Arabia?
ER70S-6 MIG Welding Wire for Mild Steel and General Fabrication
The most widely stocked solid MIG wire across Saudi Arabia. Works on mild steel and low-alloy steel from light gauge sheet to structural sections.
Higher manganese and silicon content versus ER70S-3 gives better wetting and works on light mill scale and surface contamination without full prep.
Brands stocked in KSA: Lincoln Electric SuperArc L-56, ESAB Aristorod 12.50, Hobart HB-28. Available in 15 kg spools from most distributors.
| Parameter |
Value |
| AWS Classification | ER70S-6 |
| Tensile Strength | 480 MPa (70,000 psi) |
| Shielding Gas | 75/25 Argon/CO2 or 100% CO2 |
| Common Diameters | 0.8 mm, 0.9 mm, 1.0 mm, 1.2 mm |
| Spool Sizes Available in KSA | 5 kg, 15 kg, 20 kg |
| Base Metal | Mild steel, low-alloy steel, light mill scale |
E71T-1C and E71T-GS Flux-Cored Wire for Structural Steel and Outdoor Work
E71T-1C requires CO2 shielding gas. E71T-GS and E71T-11 are self-shielded and need no gas cylinder, which makes them the choice for site work, maintenance, and any outdoor application where running a gas line is not practical.
The flux core also produces a slag blanket that slows the cooling rate, which reduces the risk of cracking in thicker sections.
Mig Welder Flux Core Welding Wire 0.03 inch E71T-GS Gasless and METAPOD 0.8 mm Gasless Flux-Cored Wire are among the commonly listed products with Saudi distributors.
| Wire Type |
Gas Required |
Best For |
| E71T-1C | CO2 | Indoor structural steel, high deposition rate |
| E71T-11 | None (self-shielded) | Outdoors, site maintenance, windy conditions |
| E71T-GS | None (self-shielded) | Light fabrication, single-pass welds, portable machines |
Stainless Steel Welding Wire ER308L and ER316L for Food, Chemical, and Process Industries
ER308L is the standard wire for 304 and 304L stainless steel. It is the most ordered stainless grade in Saudi Arabia for food processing equipment, architectural components, and general stainless fabrication.
ER316L adds molybdenum, which increases corrosion resistance in chloride environments. It is specified for chemical plant piping, coastal structures, and desalination equipment.
Khaleed Stainless is a Saudi-based specialist supplier for ER308L and ER316LSi. ESAB and Lincoln Electric grades are available through Alruqee and Abahsain for certified project supply.
| Grade |
Base Material Match |
Shielding Gas |
Key Application |
| ER308L | 304, 304L stainless | Argon or Argon/CO2 | Food equipment, tanks, general stainless |
| ER316L | 316, 316L stainless | Argon or Argon/CO2 | Chemical piping, coastal, desalination |
| ER316LSi | 316L stainless | Argon or Argon/CO2 | Better wetting and flow, smooth bead profile |
Aluminium Welding Wire ER4043 and ER5356 for HVAC, Automotive, and Marine
ER4043 is a silicon-based wire. It flows easily, produces a flat bead, and is less crack-sensitive. Used for 6000-series aluminium, automotive parts, and HVAC components.
ER5356 has higher strength and is used for 5000-series aluminium including marine and structural applications. It is not suited for post-weld heat treatment.
Nassguard Trading supplies aluminium TIG filler rods and MIG wire across Riyadh, Jeddah, Dammam, and Jubail.
MIG/MAG Copper-Coated Welding Wire for High-Speed Production and Automated Welding
Copper coating reduces contact tip wear, improves electrical conductivity, and extends wire shelf life by preventing surface rust during storage.
Used in automated welding cells and high-cycle production environments where consistent feedability matters. Available as MIG/MAG Copper Coated Welding Wire through Saudi distributors.
ICTC Company and Prime Source Group (PSG) supply copper-coated MIG/MAG wire under WeldZzz and WeldRely brands from Saudi-based stock.
BOHLER EAS 2-IG (Si) Solid Wire for Stainless Steel MIG/MAG Welding
A premium BOHLER solid wire for welding austenitic stainless steel. The Si addition improves arc stability and weld bead wetting. Used in the oil, gas, and petrochemical sector where consistent, traceable weld quality is required.
Available through Alruqee Industrial Marketing Company with full material test certificates and datasheets for project-spec procurement.
Welding Wire Diameter Guide: Which Size for Your Application?
| Diameter |
Metal Thickness |
Machine Type |
Typical Use |
| 0.6 mm / 0.023" | 0.5 to 1.5 mm | 110V light machines | Sheet metal, thin gauge |
| 0.8 mm / 0.030" | 1 to 6 mm (16g to 1/4") | 110V to 220V | Auto body, light fabrication, HVAC |
| 0.9 mm / 0.035" | 3 to 12 mm (1/8" to 1/2") | 220V workshop machines | Structural steel, general fabrication |
| 1.0 mm | 5 to 20 mm | Industrial 3-phase | Heavy fabrication, pressure vessels |
| 1.2 mm / 0.045" | 10 mm and above | Industrial 3-phase | Structural steel, shipbuilding, construction |
0.8 mm vs 0.9 mm
0.8 mm is better for thin materials and smaller machines. 0.9 mm is the all-around size for structural steel and carries more current, which means faster travel speeds and better fusion on heavier plate. If you are unsure, 0.9 mm covers more jobs on a standard 220V machine.
Welding Wire AWS Classification Codes Explained
How to Read an ER70S-6 Code
E
Electrode
Carries the electrical arc
R
Rod / Wire
Filler metal rod format
70
Tensile Strength
70,000 psi minimum
S-6
Solid / Chemistry
Solid wire. Grade 6 = higher Mn + Si
What F1, F2, F3, F4 Mean in Welding Wire Classification
F-numbers classify welding filler metals by their usability characteristics for procedure qualification purposes (ASME Section IX).
F1
High cellulosic electrodes. E6010, E6011. Deep penetration, used for pipeline root passes.
F2
Low cellulosic. E6012, E6013. General purpose electrodes, easier to use.
F3
Low hydrogen electrodes. E7016, E7018. Required for high-strength and low-alloy steels.
F4
Low hydrogen iron powder. E7024, E7028. Flat and horizontal positions, high deposition.
Welding Wire Suppliers and Distributors in Saudi Arabia
These are the established welding wire suppliers operating across Saudi Arabia. Most carry stock for same-day or next-day pickup. For bulk or certified project orders, contact the distributor directly for lead time, minimum quantity, and documentation.
Saleh and Abdulaziz Abahsain Co. Ltd – Welding Division
Dammam, Eastern Province | Authorized Lincoln Electric Distributor
Dammam
The authorized Lincoln Electric distributor for Saudi Arabia. One of the most established welding consumables companies in the country. Stocks Lincoln Electric SuperArc L-56, Flux-cored welding wires, TIG filler rods, and welding electrodes. Serves oil and gas, petrochemical, construction, and heavy fabrication sectors.
| Coverage | Dammam, Al Khobar, Jubail, Eastern Province, national shipping |
| Products | Lincoln Electric welding wire, flux-cored wire, electrodes, TIG filler, welding equipment |
| Certifications | Mill certificates, MSDS, COC documentation available for project compliance |
| Technical Support | Welding engineers available for product selection and procedure qualification |
| Sectors Served | Oil and gas, petrochemical, construction, fabrication, maintenance |
ESAB Welding Machines and Consumables – Saudi Arabia
Multiple Locations, Saudi Arabia
Nationwide
ESAB is one of the largest welding consumable brands operating in Saudi Arabia. Their product range covers solid MIG wires, flux-cored wires, stainless steel wires, and submerged arc welding consumables. ESAB Aristorod 12.50 is a widely used ER70S-6 equivalent for mild steel MIG welding.
| Key Products | Aristorod 12.50 (ER70S-6), ESAB flux-cored wires, stainless MIG wire, SAW wire |
| Distributor Network | Stocked through Alruqee Industrial Marketing (Al Khobar) and multiple regional distributors |
| Certifications | Products carry AWS, EN, and ISO classifications. Material certificates available. |
| Spool Sizes | 5 kg, 15 kg, 20 kg, 200 kg drum for automated systems |
Alruqee Industrial Marketing Company
Al Khobar, Eastern Province
Eastern Province
One of the largest industrial marketing companies in the Eastern Province. Distributes ESAB, BOHLER, and other certified welding wire brands to oil and gas contractors, construction companies, and fabrication facilities. Bulk orders can be arranged with delivery across the Eastern Province and Jubail industrial zone.
Address
Alkhobar 31952, Kingdom of Saudi Arabia
| Coverage | Eastern Province, Jubail, Dammam, Dhahran. Nationwide bulk shipping. |
| Min Order (Bulk) | Bulk pricing from 10 kg and above. No minimum for standard stock items. |
| Certifications | ISO-compliant supply chain. Material test certificates on request. |
ITW Welding Saudi Arabia – Miller and Hobart Filler Metals
Saudi Arabia
KSA
ITW Welding distributes Miller welding equipment and Hobart filler metals in Saudi Arabia. Hobart MIG and TIG welding wires are widely used across fabrication shops and maintenance teams. Hobart HB-28 is one of the most recognized ER70S-6 wires available in the market.
| Key Products | Hobart HB-28 (ER70S-6), Hobart flux-cored wires, stainless TIG rods |
| Equipment | Miller MIG welders, TIG machines, multi-process units |
| Sectors | Fabrication workshops, maintenance contractors, light industrial |
Prime Source Group (PSG) – WeldZzz and WeldRely Brands
Saudi Arabia | Local Manufacturer
Local Manufacturer
Saudi-based manufacturer and supplier of MIG/MAG welding wires, flux-cored wires, and welding electrodes. Products sold under the WeldZzz and WeldRely brands. Local manufacturing means shorter lead times and locally available stock without import delays. ICTC Company in Dammam also distributes WeldRely MIG/MAG welding wires.
| Products | MIG/MAG solid wire, flux-cored wire, welding electrodes (WeldZzz, WeldRely brands) |
| Website | psgsa.com.sa |
| Lead Time | Local Saudi stock. Shorter lead times versus imported brands. |
Nassguard Trading
Riyadh, Jeddah, Dammam, Jubail
Nationwide
Supplies MIG wire, TIG filler rods, and flux-cored welding wire across four cities in Saudi Arabia. Covers the main industrial markets in Riyadh, Jeddah, Dammam, and Jubail. Website: nassguard.sa
| Products | MIG wire, TIG filler rods, flux-cored wire |
| Coverage | Riyadh, Jeddah, Dammam, Jubail |
Khaleed Stainless
Saudi Arabia | Stainless Steel Wire Specialist
Specialist
Specialist supplier for stainless steel welding wires. Stocks ER308L and ER316LSi for buyers in the food processing, chemical, and construction sectors. Website: khaleedstainless.com
| Products | ER308L, ER316L, ER316LSi stainless steel welding wire |
| Specialization | Stainless steel welding consumables |
Additional Welding Wire Distributors Across Saudi Arabia
Nour Al Thuqa Hand Tools
Riyadh
Abi Ibn Kaab, Al Sinaiyah District, Riyadh
+966 54 732 9495
Alam Al Nahrain Building Materials
Riyadh
King Abdulaziz Rd, Al Aarid, Riyadh
+966 55 636 3088
Amal Alqyrwan Trading Establishment
Riyadh
Madinah Al Munawarah Road, Riyadh
+966 55 172 7394
Kasweld
Dammam
Aslam Bin Omaira, Al Amamrah, Dammam 31491
+966 13 832 5799
Winshar Trading
Dammam
Al Amamrah, Dammam
+966 13 832 6174
EJAR Machinery Rental Alternatives Co. Ltd
Riyadh
Natheem, Kilo 29, Khurais Road, Riyadh
+966 11 231 9984
Saudi Welding Co. for Trading and Marketing
Jeddah and Jubail
Welding consumables and welding wire for light and heavy industry
Spark Weld Trading Company
Riyadh
Local supplier of welding consumables and electrodes for workshops and fabricators
People Also Ask: Welding Wire in Saudi Arabia
What is welding wire used for?
Acts as both the electrode to carry the arc and the filler metal to fuse the base pieces.
Fed continuously through the welding gun during MIG, MAG, and FCAW processes.
Used in fabrication, structural steel, HVAC, pipework, automotive, and maintenance welding.
Different grades match different base metals: ER70S-6 for mild steel, ER308L for stainless, ER4043 for aluminium.
What are the four types of welding?
MIG/GMAW: Wire-fed, shielding gas, fast and clean. Most common in workshops.
TIG/GTAW: Tungsten electrode, filler rod fed by hand. Precise, used for stainless and aluminium.
Stick/SMAW: Coated electrode, no gas needed. Used outdoors, on-site, and in all positions.
FCAW: Flux-cored wire, can be self-shielded. High deposition, outdoor and structural use.
What is F1, F2, F3, F4 in welding?
F-numbers are ASME groupings for filler metals used in procedure qualification (PQR/WPS).
F1: High cellulosic electrodes (E6010, E6011). Pipeline root passes.
F2: Low cellulosic (E6012, E6013). General purpose.
F3: Low hydrogen (E7016, E7018). High-strength and structural steel.
F4: Low hydrogen iron powder (E7024, E7028). Flat/horizontal, high deposition.
What is the difference between 0.8 mm and 0.9 mm welding wire?
0.8 mm: Better for thin metal, 1 to 6 mm. Lower heat input, less distortion on light gauge.
0.9 mm: Better all-around for structural steel 3 to 12 mm. Carries more current, faster travel speed.
If your machine is 220V and you weld steel between 3 and 10 mm, 0.9 mm covers most jobs.
What is welding wire material made of?
Mild steel wire (ER70S-6): Low carbon steel with manganese and silicon additions.
Stainless wire (ER308L): Iron, chromium (18 to 20%), nickel (9 to 11%), low carbon.
Aluminium wire (ER4043): Aluminium alloy with silicon additions for fluidity.
Flux-cored wire: Metal tube outer shell filled with powdered flux compounds.
What is welding wire price per kg in Saudi Arabia?
ER70S-6 mild steel (15 kg spool): Approximately 35 to 70 SAR per kg depending on brand
Flux-cored wire (E71T-11): Approximately 45 to 95 SAR per kg
Stainless ER308L: Approximately 180 to 350 SAR per kg
Prices vary by brand, spool size, and order quantity. Contact distributor for current pricing and bulk rates.
What is MIG welding wire and when do you use it?
MIG wire is solid wire fed through a welding gun with a shielding gas protecting the weld pool.
Use it indoors on clean metal where you need a smooth, low-spatter bead.
Suitable for thin to medium steel, stainless steel, and aluminium with the correct shielding gas.
Avoid MIG wire outdoors or in windy conditions. Shielding gas gets displaced and weld quality drops. Use flux-cored wire instead.
What is gasless welding wire and does it work on all metals?
Gasless wire is self-shielded flux-cored wire. The flux inside the tube generates its own protective gas when heated.
No gas cylinder needed. Works outdoors, on site, in wind, on rusty or painted metal.
Best for mild steel and low-alloy steel. Not suitable for stainless steel or aluminium.
Common grades in Saudi Arabia: E71T-GS and E71T-11. Both are single-pass wires for general steel work.
Not Sure Which Wire to Order?
Tell any supplier two things and they can confirm the correct wire immediately:
1. The base metal you are welding (mild steel, stainless 304, aluminium 6061, etc.)
2. Whether you are welding indoors with a gas cylinder or outdoors without gas
Those two answers determine the AWS classification, diameter, and spool size for your job.
