Complete List of Rolling Shutter Door Suppliers in Saudi Arabia
Al Faris Doors & Gates Co.
What they do: Commercial and industrial rolling shutters, motorized systems, steel roller doors
Location: King Fahd Road, Al Olaya District, Riyadh 13311
Phone: +966 11 462 8930
Coverage: Central Region (Riyadh, Qassim, Buraidah)
Best for: Retail chains, medium-sized warehouses, shopping mall kiosks
Al Faris has been operating since around 2008 and handles both manual and motorized shutters. They're a solid mid-range option if you're outfitting multiple shop locations and need consistent quality without breaking the budget. They keep common sizes in stock, which means faster installation—usually 5-7 days instead of waiting weeks for custom fabrication.
Jeddah Steel Rolling Shutters
What they do: Galvanized steel shutters, coastal-grade rolling doors, rust-resistant systems
Location: Al Rawdah District, Jeddah 23323
Phone: +966 12 667 1245
Coverage: Western Region (Jeddah, Makkah, Taif, Yanbu)
Best for: Coastal properties, marine environments, high-humidity locations
If you're anywhere near Jeddah or Red Sea cities, regular mild steel shutters will start showing rust spots within months. Jeddah Steel Rolling Shutters uses proper marine-grade galvanizing and powder coating that actually holds up in salt air. Their shutters cost about 20-30% more upfront, but you won't be dealing with rust repairs every year.
Modern Gate & Door Solutions
What they do: Transparent polycarbonate shutters, retail visibility shutters, modern commercial doors
Location: Exit 9, King Abdullah Road, Riyadh 13311
Phone: +966 11 478 9201
Coverage: Riyadh, Buraidah, Hail
Best for: Retail showrooms, branded stores, mall outlets
Modern Gate & Door Solutions specializes in those see-through polycarbonate shutters you see at upscale mall stores. If you're running a mobile shop, clothing boutique, or jewelry store where visibility matters even when closed, they stock several configurations ready to install.
Gulf Roller Shutter Factory
What they do: Custom fabrication, non-standard sizes, security shutters with pass doors
Location: Second Industrial City, Jeddah 23442
Phone: +966 12 636 8874
Coverage: Western Region (Jeddah, Yanbu, Rabigh)
Best for: Custom sizes, special requirements, built-in wicket doors
Gulf Roller Shutter Factory manufactures on-site, which means if you need odd dimensions or specific features like a pedestrian door built into a large shutter, they can handle it without outsourcing. Their quality control is better than shops that just assemble imported parts.
Al Majd Industrial Doors
What they do: Fire-rated shutters, high-security doors, automated industrial systems
Location: Al Khobar Corniche Road, Al Khobar 34445
Phone: +966 13 899 4537
Coverage: Eastern Province
Best for: Oil & gas facilities, chemical storage, fire-rated applications
Al Majd carries certifications for fire-rated rolling shutters necessary for certain industrial applications, especially in petrochemical facilities around Jubail and Ras Tanura. They understand ARAMCO and SABIC specifications and can provide the documentation needed for facility approvals.
Riyadh Automatic Doors Est.
What they do: Motorized shutters, remote control systems, annual maintenance contracts
Location: Khurais Road, Riyadh 12845
Phone: +966 11 456 2309
Coverage: Central Region
Best for: Businesses needing ongoing service support, motorized systems
Riyadh Automatic Doors focuses heavily on the motorization and automation side. If you're installing shutters that will open and close 20+ times daily, they spec motors that can actually handle the cycle count unlike suppliers who just throw in whatever's cheapest.
Red Sea Gates & Shutters
What they do: Aluminum shutters, lightweight commercial doors, anti-corrosion systems
Location: North Obhur, Jeddah 24267
Phone: +966 12 658 7412
Coverage: Jeddah, Makkah
Best for: Weight-sensitive applications, corrosion-prone areas
Red Sea Gates specializes in aluminum rolling shutters lighter weight than steel and naturally corrosion-resistant. Good option if you're installing on a structure that can't support heavy steel shutters, or if you're in a high-humidity area where even galvanized steel eventually has problems.
Eastern Gates Trading Co.
What they do: Budget-friendly retail shutters, manual operation, standard sizes
Location: Dammam-Riyadh Highway, Near Hofuf
Phone: +966 13 587 2194
Coverage: Al Ahsa, Hofuf, Haradh, Qatif
Best for: Small shops, budget projects, secondary cities
Eastern Gates Trading focuses on the affordable end of the market. If you're opening a small shop in Hofuf or Haradh and need a basic shutter that works without fancy features, their pricing is competitive. They stock standard 3m and 4m shutters that can be installed within days.
Skyline Rolling Shutters
What they do: Polycarbonate shutters, modern retail designs, aesthetic-focused solutions
Location: Al Malqa District, Riyadh 13521
Phone: +966 11 520 3786
Coverage: Riyadh, Qassim
Best for: Upscale retail, brand-conscious businesses, modern commercial properties
Skyline focuses on appearance as much as function. If your brand image matters and you want shutters that don't look industrial, they offer polycarbonate designs, powder coating in custom RAL colors, and cleaner installation work than average suppliers.
Al Waha Doors Manufacturing
What they do: Industrial shutters, custom powder coating, large-scale projects
Location: Yanbu Industrial City, Yanbu 46455
Phone: +966 14 392 6158
Coverage: Yanbu, Madinah, Tabuk
Best for: Industrial facilities, factory installations, corporate color matching
Al Waha has an in-house powder coating line, which means they can match shutters to your corporate colors or facility standards without outsourcing. This matters for companies with strict brand guidelines or industrial facilities that color-code different zones.
Prime Security Shutters
What they do: High-security shutters, reinforced doors, banks and high-value storage
Location: Al Kharj Road, Riyadh 11564
Phone: +966 11 543 8820
Coverage: Riyadh and surroundings
Best for: Banks, jewelry stores, pharmaceutical storage, cash-handling facilities
Prime Security Shutters specializes in security-rated shutters with reinforced construction and multi-point locking systems. If you're storing high-value goods or handling cash, their shutters use heavier gauge steel (1mm to 1.2mm) and have anti-lift brackets that prevent prying attacks.
Delta Industrial Doors
What they do: Large-span industrial shutters, petrochemical facilities, ARAMCO-approved systems
Location: Jubail Industrial City, Jubail 35718
Phone: +966 13 361 7493
Coverage: Jubail, Ras Tanura, Dammam
Best for: Petrochemical facilities, refineries, heavy industrial applications
Delta Industrial Doors works almost exclusively with petrochemical and heavy industrial clients. They're familiar with ARAMCO, SABIC, and Ma'aden facility standards and maintain the necessary certifications and approvals.
Arabian Automatic Doors Co.
What they do: Automatic glass doors, sliding entrances, revolving doors, sensor systems
Location: Olaya District, Riyadh 12214
Phone: +966 11 419 5522
Coverage: Riyadh, Eastern Province, major commercial cities
Best for: Commercial buildings, malls, hospitals, office towers
Arabian Automatic Doors Co. focuses on pedestrian access systems rather than heavy industrial gates. Their portfolio includes sliding glass doors, revolving entrances, and sensor-based automatic door systems for high-traffic commercial environments.
Vision Automatic Systems
What they do: Full automation, building management integration, smart access control
Location: Al Sahafa District, Riyadh 13321
Phone: +966 11 493 6627
Coverage: Riyadh, Jeddah on request
Best for: Smart facilities, centralized control systems, automated warehouses
Vision Automatic Systems focuses on the technology side of shutter systems. If you are building a facility where rolling shutters must integrate with fire alarms, access control, and building management systems, they handle the programming and control setup.
Saudi Industrial Door Systems
What they do: High-speed doors, insulated industrial shutters, sectional overhead doors, loading bay solutions
Location: 3rd Industrial City, Riyadh 14335
Phone: +966 11 812 7744
Coverage: Central Region and nationwide for large projects
Best for: Logistics hubs, cold storage facilities, manufacturing plants
Saudi Industrial Door Systems focuses on performance-driven installations where speed, insulation, and durability are critical. Their high-speed roll-up doors are commonly used in temperature-controlled warehouses and food processing plants where minimizing air exchange is important.
Arabian Secure Shutters Co.
What they do: Security roller shutters, reinforced steel doors, anti-theft systems
Location: Al Malaz District, Riyadh 12831
Phone: +966 11 498 3321
Coverage: Riyadh and Central Province
Best for: Jewelry stores, exchange houses, pharmacies, high-risk retail zones
Arabian Secure Shutters Co. focuses specifically on reinforced shutter systems designed to resist forced entry. Their shutters use thicker steel slats, anti-lift locking brackets, and reinforced bottom bars to reduce vulnerability to prying and cutting attempts.
Al Noor Roller Doors Factory
What they do: Heavy-gauge steel rolling shutters, custom industrial doors, on-site fabrication
Location: Industrial Zone, Al Khobar 34446
Phone: +966 13 802 7745
Coverage: Eastern Province (Khobar, Dammam, Jubail)
Best for: Logistics centers, factories, cold storage units
Al Noor Roller Doors Factory manufactures industrial-grade shutters using 1mm to 1.5mm galvanized steel designed for high cycle operations. Their systems are engineered for large warehouse openings and heavy daily usage.
Al Noor Roller Doors Factory
What they do: Heavy-gauge steel rolling shutters, custom industrial doors, on-site fabrication
Location: Industrial Zone, Al Khobar 34446
Phone: +966 13 802 7745
Coverage: Eastern Province (Khobar, Dammam, Jubail)
Best for: Logistics centers, factories, cold storage units
Al Noor Roller Doors Factory manufactures industrial-grade shutters using 1mm to 1.5mm galvanized steel designed for high cycle operations. Their systems are engineered for large warehouse openings and heavy daily usage.
Advanced Industrial Shutter Co.
What they do: High-cycle industrial shutters, reinforced warehouse doors, automation systems
Location: 3rd Industrial City, Riyadh 14334
Phone: +966 11 602 7748
Coverage: Central Region and nationwide for large projects
Best for: Distribution centers, logistics hubs, manufacturing plants
Advanced Industrial Shutter Co. designs heavy-duty rolling shutters engineered for frequent daily operation. Their systems use 1mm to 1.2mm galvanized steel with reinforced bottom bars and industrial-grade guide channels to handle continuous warehouse traffic.
What are the types of rolling shutter doors are available in KSA
Fencing Gate
Standard rolling shutter doors provide secure closure for retail shops, commercial properties, and light industrial applications throughout Saudi Arabia. These doors roll vertically into a compact housing box above the opening, saving space compared to swing or sliding doors.
Available from rolling shutter door suppliers in configurations including manual chain operation, gear-operated systems, and motorized automation. Standard shutters typically use 0.5mm to 0.8mm galvanized or mild steel construction with powder coating for weather protection.
Applications include shop fronts, mall kiosks, small warehouses, storage units, and service counters. Suppliers like Al Faris Doors & Gates Co. (+966 11 462 8930) stock common sizes for quick installation, while Gulf Roller Shutter Factory (+966 12 636 8874) handles custom dimensions.
Installation typically takes 3-7 days depending on whether you're using stock sizes or custom fabrication. Manual shutters start around SAR 1,500 for small openings, while motorized systems range from SAR 5,000 to SAR 12,000 installed.
Industrial Roller Shutter
Industrial roller shutters handle the heavy-duty demands of warehouses, factories, logistics facilities, and manufacturing plants across Saudi Arabia. These shutters feature heavier gauge steel construction (typically 1mm to 1.2mm thickness), reinforced guide rails, and wind-rated engineering for large openings.
Width capacity ranges from 6 meters up to 12 meters for single-door installations. Heavy-duty applications may require bi-parting systems for openings exceeding 12 meters. Motorized operation is standard due to door weight and size, with motors rated from 800kg to 2000kg capacity depending on door dimensions and cycle requirements.
National Shutter Systems (+966 13 834 5612) specializes in large-span industrial shutters throughout Dammam and the Eastern Province, including wind-load calculations for coastal warehouses. Delta Industrial Doors (+966 13 361 7493) focuses on petrochemical facilities around Jubail with ARAMCO and SABIC-approved systems.
High-cycle facilities requiring frequent daily operation need commercial-grade motors designed for continuous use. Budget SAR 15,000 to SAR 60,000 depending on door size, automation level, and safety features like photoelectric sensors and emergency stop systems.
Steel Roller Shutter RSD DF NFR
Security-rated steel roller shutters provide enhanced protection for banks, jewelry stores, pharmaceutical warehouses, and high-value storage facilities. These shutters use heavier gauge galvanized steel (0.8mm to 1mm thickness minimum) with reinforced locking mechanisms, anti-lift brackets, and hardened materials resistant to cutting and prying attacks.
Available in fire-rated configurations (NFR - Non-Fire Rated or fire-resistant variants) meeting building code requirements for certain applications. Security shutters often incorporate built-in alarm systems, tamper detection, and integration with facility security monitoring.
Prime Security Shutters (+966 11 543 8820) supplies security-rated systems for banks and high-value retail throughout Riyadh. Al Majd Industrial Doors (+966 13 899 4537) provides fire-rated and security shutters for industrial applications in the Eastern Province.
Pricing ranges from SAR 6,000 to SAR 18,000 depending on security level, fire rating requirements, and automation features. Insurance companies often specify minimum security standards for certain business types, making these shutters necessary rather than optional for compliance.
Transparent Shutter Door Polycarbonate
Transparent polycarbonate shutters combine security with visibility for retail showrooms, branded stores, jewelry shops, and mall outlets where merchandise display matters even when closed. These shutters use extruded polycarbonate panels (typically 10cm wide strips) mounted within aluminum or steel frames.
Polycarbonate construction provides impact resistance while allowing customers to view displays after hours proven to increase foot traffic and window shopping interest. The see-through design maintains brand visibility and architectural aesthetics better than solid steel shutters.
Modern Gate & Door Solutions (+966 11 478 9201) stocks polycarbonate shutters in Riyadh with color options and quick installation timelines. Skyline Rolling Shutters (+966 11 520 3786) focuses on aesthetic applications for upscale retail properties.
Common widths range from 3 to 5 meters for retail applications. Pricing runs SAR 5,000 to SAR 12,000 depending on size and automation level approximately 40-60% more expensive than equivalent steel shutters, but worth it for visibility-dependent businesses.
Manual operation is feasible for smaller sizes, though motorization improves convenience and reduces wear on polycarbonate components. Scratching is more visible than on steel shutters, so proper handling during operation matters.
Heavy Duty Rolling Shutters 9000 x 9000 mm
Extra-large rolling shutters accommodate oversized openings in aircraft hangars, freight terminals, container yards, and industrial facilities requiring wide-span access. These systems typically use cantilever or bi-parting configurations to handle openings from 8 meters up to 12+ meters wide and 4-6 meters high.
Construction uses heavy gauge galvanized steel (1.2mm+) with reinforced structural framing capable of handling significant wind loads without deflection. Engineering calculations factor in Saudi Arabia's wind conditions, particularly important for coastal installations in Jeddah, Yanbu, Jubail, and Dammam.
Motorization is mandatory due to door weight, with heavy-duty commercial motors rated for continuous operation. Safety features include photoelectric sensors, emergency stop buttons, battery backup for power outages, and manual override systems.
National Shutter Systems (+966 13 834 5612) engineers large-span shutters for warehouses and logistics facilities. Delta Industrial Doors (+966 13 361 7493) handles extra-large installations for industrial clients.
Foundation requirements are substantial reinforced concrete footings typically 800mm to 1500mm deep depending on soil conditions and door weight. Installation timelines run 4-8 weeks including fabrication, galvanizing, coating, and on-site assembly.
Pricing ranges from SAR 40,000 to SAR 100,000+ depending on exact dimensions, wind-load requirements, automation complexity, and safety systems. These are specialized installations requiring experienced suppliers not suitable for general contractors without specific expertise.
Spiral Door Internal LP042
Spiral doors and counter shutters serve specialized internal applications including bank teller windows, pharmacy service counters, internal security partitions, and kitchen pass-through openings. These compact systems roll into minimal headroom, making them suitable for tight spaces where standard shutters won't fit.
Construction typically uses lighter gauge steel (0.5mm to 0.7mm) since these doors face less demanding conditions than external shutters. Manual chain operation is common due to smaller door sizes and lower cycle counts.
Applications include:
- Bank teller security shutters
- Hospital pharmacy windows
- Restaurant service counters
- Warehouse internal partitions
- Equipment rooms and storage closets
Dimensions typically range from 1 meter to 3 meters wide and 1.5 to 2.5 meters high. Compact spiral configurations require only 250-350mm headroom compared to 400-600mm for standard shutters.
Pricing runs SAR 2,000 to SAR 6,000 installed depending on size and finish. Most rolling shutter suppliers can provide these as part of larger projects, though they're sometimes treated as specialty items with longer lead times.
SKB Rolling Counter Door
Rolling counter doors provide security and access control for service windows, counters, and pass-through openings in commercial and institutional settings. These doors combine compact installation with convenient operation for applications requiring frequent opening and closing throughout the day.
Common uses include:
- Retail service counters
- Fast food pick-up windows
- Reception area security shutters
- Document pass-through windows
- Cafeteria serving counters
Manual operation via spring-assist or chain mechanism suits the smaller door sizes and frequent daily use. Motorization is available but rarely necessary unless the counter door exceeds 2.5 meters wide or sees exceptionally high cycle counts.
Construction uses steel or aluminum slats depending on application. Powder coating provides color coordination with interior design schemes. Locking mechanisms include key-operated locks, combination locks, or integration with building access systems.
Typical dimensions range from 0.8 to 2 meters wide and 0.8 to 1.5 meters high. Installation is straightforward in existing openings with adequate header space for the roller housing.
Pricing ranges from SAR 1,800 to SAR 5,000 depending on size, material, and locking requirements. Lead time for standard sizes is typically 1-2 weeks including fabrication and installation.
Shutter Industrial Door
Industrial shutter doors encompass the range of heavy-duty rolling shutters designed for manufacturing, logistics, and warehousing applications throughout Saudi Arabia's industrial zones. These doors prioritize durability, high cycle capacity, and reliable operation under demanding conditions.
Key features include:
- Heavy gauge steel construction (1mm to 1.5mm)
- Wind-load engineering for large openings
- High-cycle motors (20,000+ operations)
- Safety systems (photoelectric sensors, emergency stops)
- Weather sealing for climate control
- Optional pass doors for pedestrian access
Applications span warehouses, distribution centers, cold storage facilities, manufacturing plants, and loading docks. Door widths typically range from 4 meters up to 12 meters, with heights from 3 to 6 meters depending on facility requirements.
National Shutter Systems (+966 13 834 5612) and Industrial Fence & Gate Co. (+966 13 901 2300) specialize in industrial installations throughout the Eastern Province. Al Waha Doors Manufacturing (+966 14 392 6158) handles industrial projects in Yanbu and the western region.
Motorization is standard, with control options including push-button, remote control, or integration with warehouse management systems. High-traffic facilities should specify commercial-grade motors rated for continuous duty cycles rather than residential-grade motors that fail under heavy use.
Installation requires proper foundation work, electrical infrastructure, and safety system integration. Timeline runs 2-4 weeks for single doors, 6-12 weeks for multi-door facilities depending on project scope.
Pricing ranges from SAR 12,000 to SAR 65,000 per door depending on size, automation, and safety features. Annual maintenance budgets should include motor servicing, track cleaning, and safety system testing to ensure reliable long-term operation.
What are the material guidance for selecting rolling shutter door
| Material Type | Thickness Range | Suitable For | Pros | Cons | Coastal Use |
|---|---|---|---|---|---|
| Mild Steel | 0.5mm | Small retail shops | Affordable, readily available | Rusts without coating | Not recommended |
| Galvanized Steel | 0.8mm - 1mm | Medium to heavy commercial | Rust-resistant, durable, long lifespan | Higher cost, heavier weight | Good with coating |
| Powder-Coated Steel | 0.6mm - 1mm | Brand-conscious retail | Custom colors, corrosion protection | Scratches expose metal | Acceptable |
| Aluminum | 0.7mm - 0.9mm | Coastal areas, humid zones | Lightweight, won't rust, minimal maintenance | Less impact-resistant, higher cost | Excellent |
| Polycarbonate | 10cm panels | Retail showrooms, visibility | See-through, modern appearance | More expensive, scratches visible | Good (with UV coating) |
| Stainless Steel | 0.8mm - 1mm | High-security, marine environments | Maximum corrosion resistance | Most expensive option | Excellent |
Material recommendations by location:
Riyadh and Central Region:
Galvanized or powder-coated steel works well. Dry climate means rust is less aggressive. Focus on dust resistance and temperature tolerance.
Jeddah and Coastal Cities:
Go aluminum, stainless steel, or marine-grade galvanizing. Salt air destroys untreated steel within 1-2 years. Suppliers like Jeddah Steel Rolling Shutters (+966 12 667 1245) and Red Sea Gates & Shutters (+966 12 658 7412) use proper coastal-grade materials.
Eastern Province (Dammam, Jubail):
Similar to Jeddah—coastal humidity and industrial pollution require corrosion-resistant materials. Industrial facilities should specify galvanized steel minimum, with stainless steel for high-value or safety-critical applications.
Northern Region (Tabuk, NEOM):
Standard galvanized steel performs well. Cooler temperatures and lower humidity reduce corrosion concerns.
How to find size & dimension of rolling shutter door
| Application Type | Width Range | Height Range | Common Models | Typical Lead Time |
|---|---|---|---|---|
| Small retail shop | 2m - 4m | 2m - 3m | Single Shutter Doors, Standard Rolling Shutters | 3-7 days (stock sizes) |
| Medium commercial | 4m - 6m | 2.5m - 3.5m | Commercial Roller Shutters, Steel Rolling Doors | 1-2 weeks |
| Large retail/showroom | 5m - 8m | 3m - 4m | Wide-Span Commercial Shutters | 2-3 weeks |
| Small warehouse/storage | 4m - 6m | 3m - 4m | Industrial Roller Shutters (light) | 2-3 weeks |
| Medium warehouse | 6m - 9m | 3.5m - 5m | Heavy-Duty Industrial Shutters | 3-5 weeks |
| Large warehouse/logistics | 9m - 12m | 4m - 6m | Extra-Large Industrial Doors | 4-8 weeks |
| Counter/service window | 0.8m - 2m | 0.8m - 1.5m | Counter Shutters, Service Window Doors | 1-2 weeks |
| Pass door integrated | Varies | Varies | Industrial with Wicket Door | Add 1-2 weeks |
Rolling Shutter Pricing Table – Saudi Arabia
| Shutter Type | Material | Thickness | Width | Height | Operation | Price Range (SAR) |
|---|---|---|---|---|---|---|
| Basic Retail Shutter | Mild Steel | 0.5mm | 3m | 2.5m | Manual | 1,500 - 3,000 |
| Standard Shop Shutter | Galvanized Steel | 0.6mm | 4m | 2.5m | Manual | 2,800 - 4,500 |
| Commercial Shop Shutter | Galvanized Steel | 0.8mm | 4m | 3m | Manual | 3,500 - 5,500 |
| Commercial Shop Shutter | Galvanized Steel | 0.8mm | 4m | 3m | Motorized | 7,000 - 11,000 |
| Transparent Polycarbonate | Polycarbonate Panels | 10cm strips | 4m | 2.5m | Manual | 6,000 - 9,000 |
| Transparent Polycarbonate | Polycarbonate Panels | 10cm strips | 4m | 2.5m | Motorized | 9,500 - 14,000 |
| Medium Industrial | Galvanized Steel | 1mm | 6m | 3.5m | Motorized | 12,000 - 20,000 |
| Heavy-Duty Industrial | Galvanized Steel | 1mm | 8m | 4m | Motorized | 18,000 - 32,000 |
| Large Warehouse Door | Galvanized Steel | 1.2mm | 10m | 4.5m | Motorized | 25,000 - 45,000 |
| Extra-Large Industrial | Galvanized Steel | 1.2mm+ | 12m | 5m | Motorized + Safety | 40,000 - 70,000 |
| Security Shutter (Reinforced) | Powder-Coated Steel | 1mm | 4m | 3m | Motorized | 8,000 - 15,000 |
| Fire-Rated Shutter | Galvanized Steel | 1mm+ | 4m | 3m | Motorized | 12,000 - 22,000 |
| Counter Shutter | Mild Steel | 0.6mm | 1.5m | 1.2m | Manual | 2,000 - 4,000 |
| Service Window Shutter | Aluminum | 0.7mm | 1m | 1m | Manual | 1,800 - 3,500 |
How to Choose the Right Supplier for Your Project
For small retail shops in Riyadh:
Contact Al Faris Doors & Gates Co. (+966 11 462 8930) or Riyadh Fence Solutions (+966 11 485 3267). Both focus on retail and residential projects with competitive pricing and quick turnaround. They stock common sizes and can install within a week.
For coastal properties (Jeddah, Yanbu, Dammam coastal areas):
Only use suppliers experienced with marine environments: Jeddah Steel Rolling Shutters (+966 12 667 1245), Red Sea Gates & Shutters (+966 12 658 7412), or National Shutter Systems (+966 13 834 5612) for the Eastern Province. Standard galvanizing isn't enough—you need marine-grade treatment or aluminum/stainless steel.
For warehouses and industrial facilities:
Go with specialists: National Shutter Systems (+966 13 834 5612) in the Eastern Province, Delta Industrial Doors (+966 13 361 7493) for petrochemical facilities, or Al Waha Doors Manufacturing (+966 14 392 6158) in Yanbu. They understand wind loads, high-cycle motors, and safety requirements.
For retail showrooms and branded stores:
Modern Gate & Door Solutions (+966 11 478 9201) or Skyline Rolling Shutters (+966 11 520 3786) focus on aesthetics and modern retail applications. They understand brand requirements and provide cleaner installations than industrial suppliers.
For high-security applications:
Prime Security Shutters (+966 11 543 8820) specializes in banks, jewelry stores, and high-value storage. Al Majd Industrial Doors (+966 13 899 4537) handles fire-rated and security applications for industrial facilities.
For budget-conscious projects:
Eastern Gates Trading Co. (+966 13 587 2194) offers competitive pricing for basic retail shutters in secondary cities. Quality is adequate for light-duty applications when budget is primary concern.
For custom or non-standard requirements:
Gulf Roller Shutter Factory (+966 12 636 8874) manufactures on-site and handles custom sizes, pass doors, and special configurations. Al Yamama Steel Fabrication (+966 11 265 8934) in Riyadh also does custom work with in-house powder coating.
Common Problems and What They Usually Mean
Shutter moves but very slowly:
Likely causes:
- Sand in tracks creating resistance (most common)
- Undersized motor struggling with door weight
- Motor starting to fail
- Springs losing tension
What to do: Clean tracks thoroughly first this fixes it 60% of the time and costs nothing. If still slow, call your supplier. Motors running under strain overheat and fail faster. Don't ignore this.
Prevention: Clean tracks monthly, especially in dusty areas or near construction sites.
Shutter stops halfway and reverses:
Likely causes:
- Safety sensors detecting obstruction (real or phantom)
- Sensors misaligned or covered in dust
- Actual obstruction in track
- Control board malfunction
What to do: Check for actual obstructions first. Clean sensor lenses with soft cloth. If that doesn't fix it, sensors need realignment or replacement—not a DIY job unless you know what you're doing.
Prevention: Keep sensor area clean. Don't stack materials near sensors.
Remote control doesn't work:
Likely causes:
- Dead battery (80% of cases)
- Remote not programmed to receiver
- Receiver unit failed
- Antenna damaged
What to do: Replace battery first. Seriously, try this before calling anyone. If multiple remotes stop working simultaneously, receiver might be fried—sometimes happens from lightning. Check if push-button still works to isolate problem.
Prevention: Keep spare batteries. Lightning strikes can kill receivers—surge protectors help but aren't foolproof.
Shutter is sagging or uneven:
Likely causes:
- Foundation settling or inadequate
- Worn hinges or mounting brackets
- Damaged guide rails
- Spring imbalance
What to do: This needs professional attention quickly. Sagging shutters stress motors and can fail catastrophically. Don't operate until fixed.
Prevention: Proper foundation work during installation. Don't cheap out on installation—it matters.
Motor runs but shutter doesn't move:
Likely causes:
- Broken shaft coupling
- Stripped gears
- Chain/belt disconnected
- Severe binding in tracks
What to do: This is a significant mechanical failure. Don't force it. Disconnect power and call for service. Forcing it can damage motor beyond repair.
Prevention: Regular maintenance catches early signs of gear wear. Don't operate shutters with binding or resistance.
Shutter makes grinding or squealing noises:
Likely causes:
- Lack of lubrication
- Sand/grit in moving parts
- Worn rollers or bearings
- Misaligned components
What to do: Lubricate first. If noise persists, worn components need replacement before they fail completely.
Prevention: Regular lubrication every 3 months. Clean dust from tracks.