.webp)
7 Street, Al Jurf, Ajman, UAE | +971 50 676 2304 · Mobile: +971 50 676 2340
Modular GRP Panel Construction – Any CapacityTank Concept supplies GRP panel water storage tanks bolted together on-site - no crane required, buildable to any required capacity. Ideal for rooftop, ground-level, and underground installations across UAE residential compounds, labour camps, hospitals, and industrial facilities.
Food-Grade Gel-Coat Interior LiningAll GRP tanks from Tank Concept feature a food-grade gel-coat interior certified for potable water contact - meeting Dubai Municipality and UAE authority requirements for residential and commercial drinking water storage tanks.
UV-Stabilised Panels – UAE Climate ReadyTank Concept's GRP panels use UV-stabilised resin that resists degradation under intense UAE sunlight year-round - maintaining structural integrity and water quality through summer temperatures exceeding 45°C on UAE rooftops.
EPDM Rubber Gasket Joints – Fully WatertightAll panel joints on Tank Concept GRP tanks are sealed with EPDM rubber gaskets - providing a fully watertight finish suitable for potable water, fire suppression, and irrigation storage applications across the UAE and GCC.
Galvanised Steel Base FrameTank Concept supplies GRP tanks with a galvanised steel base frame as standard - providing a stable, corrosion-resistant foundation for both rooftop and ground-level installations in UAE coastal and industrial environments.
Rust-Free – Ideal for UAE Coastal EnvironmentsGRP is inherently rust-free - unlike steel tanks that deteriorate rapidly in the Gulf's high-chloride coastal atmosphere. Tank Concept's GRP water tanks maintain full structural and hygienic performance over a certified 25-year design life.
✓ Tank Concept supplies customised GRP panel tanks for residential and commercial UAE installations - any capacity, any configuration, bolted on-site without cranes or heavy lifting equipment.
✓ Tank Concept's food-grade gel-coat lining meets Dubai Municipality and UAE authority requirements for potable water storage - accepted for residential, hotel, hospital, and commercial drinking water applications.
✓ Tank Concept GRP tanks are UV-stabilised and rust-free - outperforming steel and uncoated alternatives in UAE coastal environments where salt air and UV radiation accelerate deterioration.
✓ Tank Concept's Al Jurf, Ajman location provides fast delivery across Ajman, Dubai, Sharjah, and the Northern Emirates - same-day availability for standard panel sizes for urgent UAE project requirements.
✓ Tank Concept's 25-year design life GRP tanks deliver lower total cost of ownership vs concrete or steel alternatives - no rust, no recoating, no structural maintenance over the full service life.
| Tank Type | GRP Panel – Modular Bolted |
|---|---|
| Capacity | Custom – any required capacity |
| Lining | Food-Grade Gel-Coat · Potable Water Certified |
| Seals | EPDM Rubber Gaskets |
| Design Life | 25 Years |
| Location | New Industrial Area 2, Al Jurf, Ajman, UAE |
| Phone | +971 6 743 3799 · +971 50 382 1889 |
| Products | GRP water tanks, fibreglass tanks, PVC tanks, custom fibre products for UAE and export markets |
| Why Choose | UAE manufacturer of GRP and fibreglass tanks - direct-from-factory pricing with custom sizes available for residential, commercial, and export requirements. |
| Location | 407 Al Fahad Building, Damascus Street, Al Qusais Industrial Area 2, Dubai, UAE |
| Phone | +971 6 523 1591 · +971 54 404 6489 |
| Products | GRP panel tanks in multiple sizes for rooftop, underground, and ground-level applications - UAE and GCC supply |
| Why Choose | Al Qusais Dubai location - convenient for Dubai MEP contractors and developers sourcing GRP panel water storage tanks for UAE residential and commercial projects. |
5th Floor, Liwa Tower, Near ADNEC, Al Khaleej Al Arabi Street, Abu Dhabi, UAE | +971 2 505 9160 · Mobile: +971 50 613 1569
Horizontal Polyethylene Water Storage TanksPolycon Gulf manufactures the PGHMB/PGHMBI range of horizontal polyethylene water tanks up to 3,785 litres - rust-proof, leak-proof, one-piece moulded construction suited for low-ceiling plant rooms, transport tankers, and rooftop installations with height restrictions across UAE properties.
BPA-Free HDPE – Food-Grade Potable WaterAll Polycon Gulf tanks are manufactured from high-quality HDPE or LLDPE - BPA-free, food-grade certified for potable water contact, and UV-stabilised for outdoor UAE rooftop use year-round without colour fade or material degradation.
Standard Inlet/Outlet Ports – Easy Plumbing ConnectionPolycon Gulf tanks include pre-drilled standard inlet/outlet ports, tie-down slots, and built-in manhole covers - ensuring straightforward connection to existing UAE plumbing without additional drilling or modification on any residential or commercial site.
Popular Capacities – Villa to Commercial ScalePolycon Gulf stocks a complete capacity range from 200 gallon water storage tanks for UAE apartments and studios up to 5,000 gallon and 10,000+ gallon configurations for large villas, residential compounds, and commercial facilities across Abu Dhabi and Dubai.
✓ Polycon Gulf is a UAE manufacturer of HDPE water storage tanks - direct-from-manufacturer pricing, no import mark-up, making their plastic tanks competitively priced for bulk UAE procurement across Abu Dhabi and Dubai.
✓ Polycon Gulf horizontal tanks suit UAE installations where vertical tanks cannot be used - underground plant rooms, transport applications, and rooftops with structural height restrictions.
✓ Polycon Gulf BPA-free HDPE tanks meet Dubai Municipality and UAE authority requirements for potable water storage - accepted for residential, hotel, and commercial drinking water applications.
✓ Polycon Gulf's Abu Dhabi location provides efficient logistics for delivery across Abu Dhabi, Dubai, and UAE project sites - local stock availability for standard residential and commercial tank sizes.
| Tank Types | Vertical and Horizontal HDPE |
|---|---|
| Capacity Range | 200 Gallon – 10,000+ USG |
| Material | BPA-Free HDPE / LLDPE · Food-Grade |
| Location | Abu Dhabi · UAE |
Dubai Municipality requires annual water tank cleaning and disinfection for all potable water storage tanks in UAE buildings. The following section covers UAE-specific tank maintenance requirements, plumbing connection services, and accessory suppliers.
Dubai Municipality Annual Tank Cleaning UAEDubai Municipality Regulation No. 11 of 2003 requires all potable water storage tanks in Dubai to be inspected and cleaned at minimum once per year by a DM-approved tank cleaning contractor. Cleaned tanks must receive a bacteriological water sample clearance before being returned to service. Failure to maintain tank cleaning records exposes UAE building owners and facilities managers to DM penalty notices and potential occupancy certificate suspension.
Tank Desilting and Sediment Removal UAEUAE mains water carries dissolved minerals that precipitate as sediment on tank floors over time - particularly calcium carbonate scale in areas supplied by DEWA or ADDC desalinated water. Accumulated sediment raises bacterial risk, reduces effective storage volume, and clogs outlet strainers. UAE tank cleaning contractors vacuum-remove sediment before chlorine wash - a step that visual inspection or simple chlorine treatment alone cannot address.
GRP Tank Panel Joint Inspection and ResealingGRP panel tank gasket joints require inspection every 3–5 years in UAE service - the combination of thermal cycling from UAE summer roof temperatures and constant water pressure gradually compresses EPDM gaskets, reducing joint clamping force. UAE tank maintenance contractors inspect and re-torque bolted joints, replace worn EPDM gaskets, and apply approved food-grade sealant to prevent seepage that contaminates stored water and causes structural softening of the galvanised base frame.
Float Valve and Level Control Replacement UAEFloat valves - the mechanical ball-float inlet valves that stop water flow when the tank reaches full level - are the most frequently replaced component on UAE water storage tanks. UAE hard water deposits scale on float valve seats, causing constant drip overflow that wastes water and creates rooftop drainage problems. UAE plumbing maintenance contractors replace failed float valves with BS 1212 Part 2 or Part 3 approved plastic-bodied diaphragm valves that resist UAE hard water scaling better than older metal-seat designs.
Tank Outlet Plumbing and Booster Pump Connection UAEConnecting a new or replacement water storage tank to existing UAE building plumbing requires certified plumbing contractors who understand DEWA and DM approved pipe materials (PPR, CPVC, or copper for potable water above ground; HDPE for underground), correct isolation valve placement, non-return valve installation on tank outlets to prevent backflow, and pressure-reducing valve setting downstream of the booster pump to protect UAE building plumbing from the elevated pressure that rooftop tank gravity head or booster pump output can generate in tall UAE buildings.
✓ Annual: Full drain-down, interior pressure wash, sediment vacuum, chlorine disinfection (50 ppm minimum 30-minute contact), refill, bacteriological sample - DM certificate issued on clearance.
✓ Every 6 months: Visual inspection of all access hatches, float valve operation check, overflow pipe clear, tank exterior inspection for UV degradation or physical damage.
✓ Every 3–5 years (GRP panel tanks): Bolt torque check and re-torque, EPDM gasket visual inspection, base frame rust inspection and treatment, internal lining condition check.
✓ As required: Float valve replacement on scale build-up or overflow failure; outlet strainer cleaning; UV damage repair on HDPE tanks; panel replacement on GRP tanks with cracked or delaminated panels.
✓ After UAE summer (Oct–Nov): Inspect HDPE tank body for heat distortion or lid seal failure - UAE summer rooftop temperatures exceed 70°C surface temperature on standard 3-layer HDPE tanks, which can cause lid deformation in tanks without insulation.
| Fitting | Purpose |
|---|---|
| Float Valve (BS 1212 Pt 2/3) | Inlet level control - stops fill at max level |
| Gate / Ball Valve (outlet) | Tank isolation for cleaning or maintenance |
| Non-Return Valve | Prevents backflow from distribution system |
| Pressure Reducing Valve | Protects building plumbing from pump pressure |
| Screened Overflow | Prevents insect ingress via overflow pipe |
| Outlet Strainer | Catches sediment before distribution pump |
| Location | Behind Emirates Sheet Fenced Office, Industrial Area, Sajaa, Sharjah, UAE |
| Phone | +971 6 536 0530 · +971 52 740 8865 |
| Products | GRP panel tanks from 1,000 USG upward with food-grade lining and galvanised base frames - standard and custom sizes. |
| Why Choose | Sharjah-based GRP tank supplier - practical for Sharjah and Northern Emirates contractors avoiding Dubai sourcing delays. |
| Location | Near China Mall, Al Jurf, Ajman, UAE |
| Phone | +971 6 748 8285 |
| Products | Vertical HDPE tanks from 200 gallons with tie-down slots, built-in handles, and bulk storage configurations for UAE commercial use. |
| Why Choose | UAE manufacturer of vertical HDPE water storage tanks - direct-factory pricing for apartment, villa, and commercial bulk storage in Ajman, Dubai, and Sharjah. |
| Location | Industrial Area 2, Ajman, UAE |
| Phone | +971 6 748 1495 · +971 50 639 3523 |
| Products | Skyline Vertical Tank SLV range from 600 litres - 400mm manhole, 7.5mm wall thickness, insulated tank options available. |
| Why Choose | Insulated plastic tank option ideal for UAE rooftop use - reduces water temperature in summer, protecting stored potable water quality. |
| Location | Opposite Big Masjid and Big Bazaar, Sajaa, Sharjah, UAE |
| Phone | +971 6 536 0401 |
| Products | GLS (Glass Fused to Steel) water storage tanks - diameters 800–3,500mm, capacity 100–5,000 m³, customised height, length, and wall thickness (4, 6, 8mm). |
| Why Choose | UAE's glass-lined steel tank specialist - combines steel structural strength with a corrosion-proof glass interior for hospitals, food processing, and premium UAE residential projects. |
| Location | Warehouse 189A-16, Ajman, UAE |
| Phone | +971 6 744 1001 |
| Products | 1,050-litre IBC totes (1,000×1,200×1,150mm) - food-grade HDPE inner bottle, galvanised steel cage, pallet base, 2-inch bottom discharge valve. |
| Why Choose | Stackable, transportable IBC water storage containers - accepted by Dubai Municipality for non-potable water and chemical handling in UAE industrial, agricultural, and logistics operations. |
| Location | Industrial Area 1, Jebel Ali, Dubai, UAE |
| Phone | +971 4 810 7777 |
| Products | Road tanker water tanks 4,000–22,730 litres - elliptical double-shell mild steel construction, top and bottom loading, for drinking water transport across the UAE. |
| Why Choose | Jebel Ali Dubai manufacturer of road tanker water tanks - for UAE water transport operators and contractors requiring large-volume mobile water storage from 4,000 to 22,730 litres. |
| Location | Sajaa Industrial Area, Sharjah, UAE |
| Phone | +971 6 531 0251 · +971 55 774 6774 |
| Products | Mild steel water tanks for industrial and municipal applications including horizontal underground tanks - manufactured in Sharjah for UAE projects. |
| Why Choose | Sharjah manufacturer of mild steel underground water tanks - suitable for UAE municipal and industrial applications requiring custom steel fabrication at competitive local pricing. |
| Location | Shop EAL 12, Dragon Mart, International City, Dubai, UAE |
| Phone | +971 4 427 3150 · +971 50 765 5058 |
| Products | HY-JM Side Mount Distributor range (HD6260B2) for tanks 400–450mm, 4–8 inch bottom opening - float valves and water treatment tank accessories. |
| Why Choose | Dragon Mart Dubai location - convenient one-stop source for water storage tank float valves, level accessories, and water treatment fittings for UAE plumbing and MEP contractors. |
Dubai Municipality recommends a minimum one-day supply reserve. For a 3–4 bedroom villa, a 2,500 gallon water storage tank is the standard recommendation. Larger properties or those in areas with intermittent supply should consider a 5,000 gallon or dual-tank system. Commercial and labour camp installations typically start at 10,000 litres and scale upward with modular GRP panels. All sizes are stocked or custom-manufactured by UAE suppliers including Tank Concept (Al Jurf Ajman, +971 50 676 2304), Polycon Gulf (Abu Dhabi, +971 2 505 9160), Polycom Plastic Industries (Ajman, +971 6 748 8285), and Skyline Plastic Industries (Ajman, +971 6 748 1495).
Dubai Municipality requires potable water storage tanks to be cleaned and disinfected at minimum once per year by a DM-approved tank cleaning contractor. Abu Dhabi DM and Sharjah municipality have equivalent requirements. The UAE tank cleaning process follows five steps: (1) drain the tank completely using the drain valve, (2) physical scrub of all interior surfaces including floor, walls, and lid underside with a stiff brush, (3) vacuum removal of all sediment and loosened debris, (4) apply chlorine solution at 50 ppm minimum concentration and allow 30-minute contact time on all surfaces, (5) rinse thoroughly, refill, and take a bacteriological water sample that must return E. coli-free before the tank is returned to service. The DM-approved contractor issues a tank cleaning certificate after bacteriological clearance - this certificate must be retained on-site for DM inspection. Tank cleaning costs in UAE range from AED 150–300 for small residential tanks (up to 2,500 gallons) to AED 500–1,500 for large commercial GRP panel tank systems.
A complete UAE water storage tank plumbing installation requires the following fittings as a minimum:
Yes. GRP panel tanks and heavy-gauge HDPE tanks are both suitable for underground installation in UAE soil conditions. Underground tanks must be structurally rated for soil and groundwater pressure, with all penetrations sealed using EPDM gaskets to prevent ingress. Fire-retardant variants are available from GRP panel suppliers for underground UAE Civil Defence applications. Kazem Abusafia Metalic Ind LLC (+971 6 531 0251) in Sharjah also manufactures horizontal mild steel underground water tanks for industrial and municipal applications.
To connect multiple water storage tanks in parallel, link the bottom outlet ports of each tank using equal-diameter pipe and a manifold, ensuring all tanks share the same base elevation. Install isolation valves on each tank outlet for maintenance access. For series connection - sequential fill - use the overflow of the first tank as the inlet of the second. UAE suppliers including Tank Concept (+971 50 676 2304) and Al Bustan Fiber Glass (+971 6 536 0530) can advise on manifold sizing for systems from 2 to 10+ tanks.
Dubai Municipality and UAE plumbing codes accept the following pipe materials for potable water tank connection: PPR (Polypropylene Random Copolymer) hot and cold - the most widely used material for UAE building plumbing in new construction, fused with heat rather than solvent-cemented, available in SDR 7.4 (PN20) or SDR 6 (PN25) pressure classes for UAE booster pump systems. CPVC (Chlorinated Polyvinyl Chloride) - approved for hot and cold water above ground; solvent-cemented fittings; widely used for UAE villa and apartment plumbing upgrades. Copper - the premium choice for UAE hospital, hotel, and food-industry tank connections where DEWA and municipality specifications reference BS 2871 copper tube. HDPE (underground only) - used for tank-to-building connections buried in UAE soil where PPR and CPVC are not rated for direct burial. Galvanised steel and PVC (uPVC for cold water below 45°C) are also accepted for certain UAE applications. Never use HDPE for above-ground hot water service or copper buried in UAE aggressive soil without approved sleeving - the two most common UAE tank plumbing material errors that cause premature failure.
0 
