Did you know? High-temperature rigid calcium silicate insulation is used in the power production, oil and gas parts in UAE. The calcium silicate sheet can tolerate temperatures above 1000°C, which helps to lower heat loss and boosts boiler, furnace, and heater energy efficiency. It is supported by local supplier services. The support also extends to technical support, custom cutting, and dependable delivery throughout the Emirates and is offered as boards, blocks, and custom pipe sections.
Specification | Grade CS-600 | Grade CS-1000 |
---|---|---|
Density | 220 - 240 kg/m³ | 240 - 260 kg/m³ |
Linear Shrinkage | <1.5% (24h @ 600°C) | <2.0% (24h @ 1000°C) |
Thermal Conductivity | 0.055 W/mK (at 200°C) | 0.085 W/mK (at 600°C) |
Compressive Strength | >1.0 MPa | >1.8 MPa |
Max Service Temperature | 600°C | 1000°C |
Common Use | Pipe Sections, Backup Insulation | Furnace Linings, High-Temp Boards |
UAE Price Range of Calcium Silicate Insulations (AED):
• Standard Board Pricing (50mm thick, 1m x 1m): 80 – 220 per board
• High-Temp Block Pricing (100mm thick): 150 – 350 per block
• Pre-formed Pipe Section Pricing (per meter, various diameters): 100 – 500.
Note: Density, Temperature rating (e.g., 650°C, 1000°C), size, thickness, and order volume all have a major determination on the pricing. For custom sizes and shapes additional fees will be levied.
Oil & Gas - Pipework, Vessel Insulation, Reformers and Cracking Furnaces, and Heater and Boiler Fireboxes
Power Generation - Heat recovery systems, flue gas duct liners, and boiler backup insulation
Industrial Manufacturing - Chemical Process Heaters, Ceramic & Cement Kilns, and Steel & Aluminum Annealing Furnaces