Suppliers and stockists based in the UAE provide an extensive selection of studs and threaded rods made from various materials, grades, and finishes to satisfy the needs of the region's thriving construction, MEP, oil and gas, and marine sectors. The types commonly available encompass fully threaded studs, double end studs, and tapped end studs, produced from carbon steel with either zinc plating or hot-dip galvanizing, as well as stainless steel 304/316 for enhanced corrosion resistance, and high-tensile grades such as 8.8, 10.9, and 12.9. These industrial fasteners adhere to international standards including ISO, DIN, ASTM, and BS, ensuring reliability and safety in critical applications such as anchor bolt systems and the installation of heavy machinery.
The services typically offered include cutting to specified lengths, custom thread rolling, the application of anti-corrosion coatings, and the issuance of mill test certificates (MTC) for quality assurance, along with bulk delivery services throughout Dubai, Abu Dhabi, Sharjah, and the broader UAE.
Typical UAE Price Range (AED):
• Carbon Steel Studs (M6-M24): 2 – 45 per piece
• Stainless Steel 304/316 Studs: 4 – 90 per piece
• High-Tensile Studs (Grade 10.9/12.9): 8 – 120 per piece
• Threaded Rod (per meter): 6 – 35.
Note: Pricing is indicative and varies based on diameter, length, material grade, surface coating, and order volume.
The specifications for studs are determined by their size, composition, and mechanical characteristics. Below is a general summary:
| Parameter | Specification Details |
|---|---|
| Types | Fully Threaded Stud, Double End Stud (Reduced Shank/Full Thread), Tapped End Stud, Continuous Threaded Rod |
| Standards | ISO 4014, ISO 4017, DIN 975, DIN 976-1, ASTM A193 (High-Temp), ASTM A320 (Low-Temp), ASME B18.2.1 |
| Common Sizes (Diam.) | M4, M5, M6, M8, M10, M12, M16, M20, M24, M30, M36 and larger custom sizes |
| Lengths | Custom cut from 20mm up to 3000mm or more, as required |
| Materials | Carbon Steel (Grade 4.8, 8.8, 10.9), Stainless Steel (SS 304, SS 316), Alloy Steel (A193 B7, B8), Brass |
| Finishes/Coatings | Zinc Plated (Blue/White/Yellow Chromate), Hot-Dip Galvanized, Xylan Coating, Dacromet, Plain (Self-Color) |
| Mechanical Properties | Tensile Strength (e.g., 800 MPa for 8.8 grade), Yield Strength, Proof Load, Hardness |
| Thread Pitch | Standard (e.g., 1.25mm for M10), Fine, and Coarse threads as per application |
A stud is generally a shorter fastener that may feature threads on both ends (known as a double end stud) or be entirely threaded, intended for permanent installation in a single component. In contrast, a threaded rod is typically a longer, fully threaded bar that can be cut to the desired length and is frequently utilized throughout the entire application or as an anchoring device.
Stainless steel 316 studs should be employed in environments that are highly corrosive, such as marine settings, coastal regions, chemical processing facilities, or outdoor constructions exposed to the severe climate of the UAE. Conversely, carbon steel studs with suitable coatings are recommended for general construction where high strength is essential, but corrosion resistance is less critical.
Grade 8.8 indicates the mechanical strength of a carbon steel stud. The initial number (8) multiplied by 100 represents the minimum tensile strength (800 MPa). The subsequent number (8) reflects the yield strength ratio, which is 80% of the tensile strength. This grade is commonly recognized as a high-tensile standard for general engineering applications.
The selection process is contingent upon the requirements of the application. Factors to consider include the load (which may necessitate specific grades such as 10.9 or 12.9), the environmental conditions (which may require stainless steel or hot-dip galvanized coatings), the compatibility with the materials being joined, and the industry standards (such as ASTM or DIN) that your project must comply with.
Indeed, most prominent suppliers in the UAE provide value-added services, including cutting length and custom thread rolling, to deliver the precise stud specifications needed for your project, whether for anchoring systems or pipeline flanges.
