You are in the ideal place if you are a facility developer, project engineer, procurement manager, or MEP contractor looking to source slotted channels in the United Arab Emirates. From slotted channel sizes and material grades to the most reliable slotted channel suppliers in Dubai, Ajman, Abu Dhabi, and throughout the Emirates, this guide is intended to address every important question you might have before placing an order or submitting an inquiry.
✓ Channel with Slots (Standard/Full Slot) — Most commonly used version. Slots run the full length of the channel web. Compatible with all common spring nuts, channel nuts, and fittings.
✓ Half-Slotted Channel — Slots on only one flange or alternating locations. Suitable for lighter weight applications where partial slot access is adequate.
✓ Plain Channel (No Slots) — Smooth-web channel without perforations. Used for structural framing where continuous mounting flexibility is not needed.
✓ Double Channel/Back-to-Back — Two slotted channel strut sections bolted or welded back-to-back for increased load-bearing capacity.
✓ Half Channel — Shallower profile for cable and light conduit support in space-restricted situations, frequently used in ceiling construction.
| Profile Name | Width (mm) | Height (mm) | Common Thickness (mm) | Application |
|---|---|---|---|---|
| Slotted Channel 41 x 21 | 41 | 21 | 1.5 / 2.0 / 2.5 | Cable tray support, light MEP systems |
| Slotted Channel 41 x 41 | 41 | 41 | 2.0 / 2.5 / 3.0 | Heavy-duty pipe & HVAC duct support |
| Slotted Channel 21 x 21 | 21 | 21 | 1.5 / 2.0 | Light cable management, small conduits |
| Back-to-Back 41 x 41 | 82 | 41 | 2.5 / 3.0 | Extra-heavy loads, structural bridging |
| Half Channel 41 x 21 (half) | 41 | ~12 | 1.5 | Ceiling cable clips, light conduit |
📌 Standard lengths: 3m and 6m. The slotted channel 41 x 21 is the standard counterpart of the internationally renowned Unistrut P1000 profile.
Galvanization produces a protective zinc coating that prevents oxidation and corrosion — critical in the UAE's hot, humid, coastal climate. GI slotted channel products are available in two galvanizing types:
Pre-galvanized (In-line galvanized)
Steel coil galvanized before roll-forming. Zinc coating weight: 80–120 g/m². Ideal for interior MEP systems, commercial buildings, and light industrial applications. Represented by Fepy (Abu Dhabi) and Right-Angle Metals Co LLC (Dubai).
Hot-Dip Galvanized (HDG)
Channel galvanized after formation. Zinc coating weight: 275–600 g/m². Recommended for outdoor, coastal, marine, and heavy-industrial environments. Available from NMSS (Ajman) and West Port Middle East.
| Company | Location | Key Products / Specialization |
|---|---|---|
| Arabian International Industries | Ajman (Industrial Area 1) | Slotted channel 41x21 & 41x41 — GI, HDG, powder-coated, Aluzinc. Unistrut UAE solutions. ISO 9001:2008 certified. |
| DANA Steel UAE | UAE-wide | DANA strut channels, flat/angle/wing fittings, beam clamps, trolleys. Projects: BOROUGE, GASCO, TAKREER, PDO, QP. |
| NMSS (New Moqam Steel Structures) | Ajman (New Industrial Area) | Slotted channel 41x21 & 41x41 — GI, HDG, powder-coated, epoxy-painted. Exports to GCC, Africa, Oman, Saudi, Kuwait, Bahrain. |
| West Port Middle East | UAE | GI slotted channel systems — BS EN, ASTM, ISO standards. MEP, HVAC, electrical, heavy industrial applications. HDG and pre-galvanized. |
| Fepy (Fepy Abu Dhabi) | Abu Dhabi | GI slotted channel 41x21x1.5mm (3m lengths) — compatible with Unistrut/Hilti fittings. |
| Right Angle Metals Co LLC | Dubai | GI main channel — 3000mm lengths, galvanized iron channel profiles. |
✓ Speed of Installation — Pre-slotted design eliminates site drilling. Channel nuts and spring nuts engage directly into slots.
✓ System Flexibility — Allows contractors to alter, expand, or reorganize pipe supports and cable tray courses without re-drilling structural components.
✓ Load-Bearing Performance — 41x21 for cable trays and conduit bundles; 41x41 for heavy-duty HVAC duct and large pipe support.
✓ Corrosion Resistance — GI slotted channels with HDG coating provide long-term protection even in offshore and maritime situations.
✓ International Standard Compatibility — Unistrut-compatible profiles work with fittings from Unistrut, Hilti, Sikla, Walraven, and OBO Bettermann.
| Feature | Slotted Channel | Standard C-Channel / MS Channel |
|---|---|---|
| Primary Use | MEP support systems | Structural framing & fabrication |
| Slot / Perforation | Continuous slots along web | No slots |
| Installation Method | Channel nuts, spring nuts | Bolting, welding |
| Reconfigurability | High — no re-drilling needed | Low — requires re-drilling or welding |
| Common Sizes | 41x21, 41x41, 21x21 mm | 75x40 mm to 200x75 mm |
| Finish | GI, HDG, Powder Coat, SS, Aluzinc | Mild Steel, Galvanized |
✓ Profile Dimensions — 41x21, 41x41, or 21x21 with thickness (1.5-3.0mm)
✓ Length — Standard 3m or 6m
✓ Surface Finish — Pre-galvanized (GI), HDG, powder-coated, or stainless steel
✓ Quantity — Total metres or pieces (MOQ based on weight or per piece)
✓ Fittings Compatibility — Unistrut, Hilti, Sikla, or OBO-standard accessories
✓ Standards / Certifications — BS EN, ASTM, ISO, or project-specific requirements
✓ Thickness — 2.5mm/3.0mm costs more than 1.5mm/2.0mm
✓ Finish — GI is most economical; HDG costs more; powder-coated and SS carry premium
✓ Size — 41x41 uses more material than 41x21
✓ Volume — Bulk orders attract better per-unit pricing
✓ Origin — UAE-manufactured channels offer fast delivery and after-sales support
✓ Verified Suppliers — Manufacturers, distributors, and stockists from Abu Dhabi, Dubai, Sharjah, and Ajman verified by UAE-based companies
✓ Multiple Product Categories — Carbon steel, stainless steel, aluminum channel profiles, GI slotted channel, and slotted steel channel in one location
✓ Direct Enquiry — Send inquiries straight to suppliers without middlemen
✓ Competitive Comparison — Compare sizes, finishes, origins, and business types side by side
✓ Fast Response — UAE-based suppliers typically reply within the same working day
The slotted channel 41 x 21 (41mm wide, 21mm high) is the most required size in MEP and building projects. It is the standard equivalent of the Unistrut slotted channel P1000 profile and compatible with the widest variety of commercially available fittings.
Unistrut is a global brand; "Unistrut slotted channel" has become a generic term for any strut channel slotted profile that meets the dimensional standard of 41x21mm or 41x41mm. Profiles from Arabian International Industries, NMSS, West Port, and DANA are all compatible with authentic Unistrut fittings.
Pre-galvanized GI slotted channels are suitable for covered outdoor applications with moderate exposure. For direct outdoor, coastal, or maritime situations, HDG-coated slotted steel channels (minimum zinc coating 275 g/m²) or SS 316 stainless steel channels are recommended.
Yes. 41x21mm and 41x41mm slotted channels that are fully compatible with standard Unistrut, Hilti, and Sikla fittings are available from verified slotted channel suppliers on Fyind, including Fepy (Abu Dhabi), Right Angle Metals (Dubai), and Arabian International Industries (Ajman).
Slotted channel 41x21 is a half-height profile suitable for light to medium MEP applications (cable trays, conduit support). Slotted channel 41x41 is a full square-height profile designed for larger loads — HVAC ducts, large bore pipes, and structural bridging applications.
Arabian International Industries (Industrial Area 1), NMSS (New Industrial Area), and DANA Steel are suppliers and dealers of slotted channels in Ajman. They produce or stock GI and HDG slotted channel profiles for fast supply throughout the UAE.
Look for ISO 9001 certified manufacturers and products meeting BS EN, ASTM A36/A53, or equivalent standards. For government and infrastructure projects, request mill test certificates (MTC) and certificates of conformance (CoC) from your slotted channel manufacturer.
Whether you need GI slotted channel 41x21 for a Dubai high-rise, HDG 41x41 for an Abu Dhabi industrial plant, or back-to-back strut channels for a heavy infrastructure project, Fyind connects you directly with the UAE's most trusted slotted channel manufacturers and suppliers. Browse the listings, compare specifications, and submit your enquiry today — no middlemen, no delays.
0 
