Wrenches Suppliers in KSA | Torque, Pipe, Adjustable & Heavy-Duty Wrenches

Wrench Suppliers in KSA | Torque, Pipe & Adjustable Wrenches for Automotive Workshops, Vehicle Maintenance & Fastener Removal

Find verified wrench suppliers in KSA stocking open-end, combination, adjustable, ring slogging, striking, torque, pipe, strap, socket, ratchet, hex, flare nut and specialty valve wrenches for automotive workshops, plumbing, construction and industrial plants. Compare Tolsen, Dongcheng, RIDGID, NORBAR, Proto, M-STRIKE, AVK, TOTAL and Sali wrench ranges alongside Manual Torque Wrench and Hydraulic Torque Wrench Manufacturers equipment. Review head type, drive size, torque range, material and finish, supplier contact numbers and wrench in ksa price range, including Torque wrench suppliers in ksa and impact wrenches in Saudi Arabia, with delivery across Riyadh, Dammam, Jeddah, Khobar and Jubail.

Verified Wrench Suppliers in Saudi Arabia — Riyadh & Dammam Wrench Dealers

Which Wrench Type & Drive Do You Actually Need?

Head pattern, jaw type and power source — fixed versus adjustable, and manual versus power-driven — cover almost every fastening job. Match your task to one:

• Open-End & Combination: best for general maintenance and automotive work where a fixed-size wrench is faster and stronger than an adjustable one. Combination wrenches pair an open end for speed with a box end for maximum grip.
• Adjustable / Spanner: a single tool that covers a range of sizes, useful for site work and mixed-size fittings, though it grips less securely than a fixed-size wrench on the same fastener.
• Ring Slogging & Striking: short, thick-headed wrenches struck with a hammer or sledge to break loose large, corroded or over-torqued fasteners beyond hand-torque capacity.
• Torque & Hydraulic Torque: manual click, beam and dial wrenches deliver a specified torque by feel or gauge; hydraulic torque wrenches use a pump-driven cassette for large-diameter, high-torque bolting beyond manual capability.
• Pipe & Strap: self-tightening serrated jaws or a wrap-around strap grip round pipe and cylindrical fittings, including polished or plastic surfaces a jaw wrench would mark.
• Socket, Ratchet & Hex: ratcheting drives speed up repetitive fastening; hex and Allen keys drive recessed socket-head fasteners on machinery and furniture.

Types of Wrenches Available in Saudi Arabia — Specifications, Models, Suppliers & Prices

Wrenches are classified by head pattern, jaw type, drive and power source. Each type below sets out its technical specification, the models stocked in the Kingdom, the suppliers carrying them and indicative price ranges in Saudi Riyals.

Open-End, Box-End & Combination Wrenches for General Maintenance, Plumbing & Automotive Work

• Technical Specification: Fixed-size wrenches forged from chrome-vanadium or high-carbon steel, chrome or satin-plated for corrosion resistance. Open ends grip two flats quickly; box (ring) ends fully enclose the fastener with 6 or 12-point patterns for higher torque with less risk of rounding. Combination wrenches carry the same size at both ends.
• Selection Notes: A 12-point box end needs only a 30° swing to re-index, useful in tight spaces, but a 6-point end grips more fastener flank and is preferred for very tight or corroded nuts. Choose satin or chrome finish for corrosion resistance in coastal or high-humidity sites.
• Models Available: Combination Wrench; Combination Wrench 22 mm; Proto® Satin Combination Wrench 3/4" – 12 Point; Deep Offset Double Ring End Wrench With Chrome Finish.
• Suppliers: Al Darb Al Hadidi Limited Company; Shan Technical Trading Company.
• Price Range: SAR 15–120 per piece; branded 12-point sets such as the Proto® Satin Combination Wrench run higher.

Adjustable Wrenches & Spanners for General Repair, Plumbing & Mixed-Size Fittings

• Technical Specification: Sliding-jaw wrenches adjusted by a worm-gear screw, forged from chrome-vanadium steel and typically chrome-plated. Sizes commonly run from 6 in up to 15 in, with jaw opening capacity scaling with handle length.
• Selection Notes: Longer handles give more jaw opening and leverage but need more swing clearance. All-steel construction (no plastic handle inserts) holds up better to repeated site drops and impacts than lighter composite-handle models.
• Models Available: Adjustable Wrench; Dongcheng Adjustable Wrench 12 in; All Steel Adjustable Wrench; Adjustable Spanner Wrench; Adjustable Hook Spanner Wrench.
• Suppliers: Al Darb Al Hadidi Limited Company; Youmats; Shan Technical Trading Company; Al Tuwaijri Industrial Equipment Company.
• Price Range: SAR 15–140 depending on length and brand.

Ring Slogging & Heavy-Duty Striking Wrenches for Frozen, Large or Over-Torqued Fasteners

• Technical Specification: Short, thick flat-pattern or offset box-end wrenches forged from carbon or alloy steel, sized from around 30 mm up to 100 mm+ (or imperial equivalents such as 2-3/16 in). Built to DIN 7444 or ASME B107.59-type standards, with a reinforced striking face rated for repeated hammer or sledge impact. Non-sparking versions use aluminium-bronze for hazardous-area work.
• Selection Notes: Match the head size precisely to the fastener — slogging wrenches rely on a tight fit plus impact force, and an oversized head risks rounding. Offset heads (commonly 45°) give clearance over surrounding obstructions that a straight pattern cannot reach.
• Models Available: Tolsen Ring Slogging Wrench 36 mm; M-STRIKE Heavy-Duty Striking Wrench 2-3/16"; Striking Wrench 70 mm in Saudi Arabia; Stony Hammer Wrench Closed.
• Suppliers: Al Tuwaijri Industrial Equipment Company; Youmats.
• Price Range: SAR 50–450 depending on head size and brand.

Manual & Hydraulic Torque Wrenches for Precision Fastening & Large-Diameter Bolting

• Technical Specification: Manual click-type torque wrenches use an internal cam mechanism that releases at a preset torque, typically calibrated to ±3–4% accuracy per ISO 6789, with square drives from 1/4 in up to 1 in and ranges spanning roughly 4 Nm to 1,500 ft-lb across the model line. Hydraulic torque wrenches replace manual leverage with a pump-driven hydraulic cylinder acting on a reaction arm, delivering several thousand Nm and up for bolts beyond safe manual capacity.
• Selection Notes: Size a manual torque wrench so the required torque sits in the middle third of its range for the best accuracy, not at either end of the scale. Move to hydraulic torque equipment once bolt diameter or specified torque exceeds what a person can safely and repeatably apply by hand — common on flanges, pipelines and structural steel connections.
• Models Available: NORBAR Torque Wrench Black; Manual Torque Wrench; Hydraulic Torque Wrench Manufacturers equipment.
• Suppliers: Bin Moqhem Construction And Development EST.
• Price Range: SAR 150–600 for manual torque wrenches; hydraulic torque systems are quotation-based, typically SAR 8,000–40,000+ depending on torque capacity.

Pipe & Strap Wrenches for Plumbing, Pipe Fitting & Cylindrical Components

• Technical Specification: Pipe wrenches use a hinged, serrated jaw on a forged steel body that self-tightens as turning force increases, sized 10–14 in and larger for heavier pipe. Strap wrenches replace the jaw with a woven nylon or rubber strap wrapped around the pipe, avoiding surface marking on polished, plated or plastic material; capacities scale with strap length, commonly 17–48 in.
• Selection Notes: Use a strap wrench rather than a serrated-jaw pipe wrench on chrome, stainless or plastic pipe to avoid gouging the surface. Size the pipe wrench to the pipe diameter — an oversized wrench applies force unevenly and can crack fittings.
• Models Available: Pipe Wrench; Heavyduty Pipe Wrench Heavy Duty 14 in; RIDGID Aluminum Strap Wrench 18 in; Belt Strap Wrench.
• Suppliers: Arabian White Horse Trading Company; Shan Technical Trading Company.
• Price Range: SAR 40–450 depending on size and material.

Socket, Ratchet, Hex & Flex-Head Wrenches for Automotive & Industrial Assembly

• Technical Specification: Ratchet wrenches use a geared reversible head for fast repetitive fastening without removing the tool between strokes; cordless versions add a battery-driven mechanism for higher speed. T-handle and L-shaped hex keys drive recessed socket-head screws in sizes from a few millimetres up to 19 mm+, usually in chrome-vanadium steel sets. Flex-head combination wrenches add a pivoting box end, typically up to 180°.
• Selection Notes: A T-handle hex key gives more turning leverage and faster spinning than an L-key for repetitive assembly work. Cordless ratchets suit high fastener counts; a manual ratchet remains the more compact option for occasional or torque-sensitive use.
• Models Available: T Hex Wrench CRVLT 60 12 Pcs; T Nut Wrench 0.5 kg; Cordless Ratchet Wrench; Flex Head Wrench.
• Suppliers: Toolx.
• Price Range: SAR 25–450 depending on whether the tool is manual or cordless.

Specialty & Valve Wrenches for Plumbing Fixtures, Irrigation & Water Utility Maintenance

• Technical Specification: Purpose-built wrenches shaped for a single job rather than general fastening — basin wrenches use a long shaft with a spring-loaded pivoting jaw for confined under-sink access; sprinkler wrenches carry multiple notches to fit common irrigation-head patterns; valve operating and seat wrenches such as the AVK type combine a hydrant-nut driver with a seat-removal end for water utility maintenance.
• Selection Notes: These tools are sized to a specific fixture family rather than a generic bolt size, so match the wrench to the fixture or valve brand and model before purchase.
• Models Available: Wash Basin Wrench; Impact Sprinkler Wrench; AVK Operating And Seat Wrench 150 mm.
• Suppliers: Youmats; Shan Technical Trading Company.
• Price Range: SAR 20–380 depending on function and size.

Popular Wrench Products Available in Saudi Arabia

Wrenches for Automotive Workshops & Fastener Removal

Suited to mechanics, tyre bays and fleet workshops needing tight-clearance fastening on engine bays and chassis, plus the extra leverage to break loose seized or over-torqued nuts and bolts.

Proto® Satin Combination Wrench 3/4" – 12 Point

• Type: Combination wrench, 12-point box end | Finish: Satin, corrosion-resistant | Fastener Fit: Engages 4, 6 and 12-point fasteners | Head Geometry: 60° deep offset.
• The 12-point pattern needs only a 30° swing to re-index the wrench, which matters when there is barely room to lift it clear of the fastener.
• Satin rather than mirror-polish finish resists workshop fingerprints and stays gripable with oily hands.

Available From: Al Darb Al Hadidi Limited Company — +966 55 657 2342

M-STRIKE Heavy-Duty Striking Wrench 2-3/16"

• Type: Offset striking (slugging) wrench, 12-point box end | Material: Alloy steel, black oxide finish | Head Size: 2-3/16 in | Overall Length: approx. 13 in.
• The offset head keeps knuckles and the hammer swing clear of surrounding brackets and housings that a straight-pattern wrench cannot reach around.
• Reserved for fasteners that have already defeated a standard wrench or breaker bar — striking a plated or chrome wrench instead of a slogging wrench risks cracking the head.

Available From: Al Tuwaijri Industrial Equipment Company — +966 11 446 6222

Cordless Ratchet Wrench

• Type: Battery-powered ratcheting wrench | Drive: Typically 1/4" or 3/8" square | Control: Variable-speed trigger, forward/reverse | Head: Slim profile for confined access.
• Cuts repetitive fastening time sharply against a manual ratchet on jobs with dozens of identical bolts, such as sump guards or interior trim.
• Not a substitute for a torque wrench on the final pass — use it to spin fasteners down quickly, then finish critical joints by hand or with a calibrated torque wrench.

Available From: Toolx — +966 54 844 0603

Wrenches for Plumbing, Pipe Fitting & Fixture Installation

Built for plumbers and MEP contractors gripping round pipe and working in the confined space under fixtures, where a standard flat-jaw wrench cannot get purchase or would damage the finish.

RIDGID Aluminum Strap Wrench 18 in

• Type: Aluminum-handled strap wrench | Strap: Woven nylon, rosin-treated, lengths from 17 in up to 48 in depending on capacity | Weight: approx. 2 lb (0.9 kg) | Pipe Capacity: Up to 12 in O.D. on the longest strap.
• Grips by wrapping and cinching rather than biting in, so it will not scratch chrome, anodised or plastic pipe the way a serrated jaw would.
• Replaceable straps mean the handle outlasts several strap changes, which is cheaper over time than replacing a whole wrench.

Available From: Arabian White Horse Trading Company — +966 54 400 1126

Heavyduty Pipe Wrench Heavy Duty 14 in

• Type: 14-inch heavy-duty pipe wrench | Jaw: Self-tightening serrated jaw, replaceable | Material: Forged steel body, hardened jaw | Capacity: Approx. up to 2 in pipe O.D.
• The angled jaw bites harder the more torque is applied, so it holds best on stubborn threaded joints rather than light finger-tight connections.
• A 14-inch length balances jaw opening against the swing room needed under sinks and in service risers.

Available From: Arabian White Horse Trading Company — +966 54 400 1126

Wash Basin Wrench

• Type: Long-shaft basin wrench | Jaw: Spring-loaded, self-adjusting, pivots to grip in either turning direction | Shaft Length: Extended reach for under-sink access | Application: Basin tap and supply-line retaining nuts.
• The pivoting jaw is what makes it usable one-handed in a space too tight to swing a standard wrench through a full turn.
• Kept in most plumbing kits specifically for this one job — there is rarely a practical substitute once a tap nut is set back against the basin underside.

Available From: Youmats — +966 11 521 6216

Wrenches for Construction, Oil & Gas & Heavy Industrial Bolting

For structural steel crews, plant maintenance teams and bolting contractors working with large-diameter fasteners where accuracy, or raw breakaway force, matters more than speed.

NORBAR Torque Wrench Black

• Type: Click-type ratchet torque wrench | Drive: 1/2 in square, models spanning 20–340 Nm | Accuracy: ±3% of reading | Standard: Calibrated to ISO 6789.
• An unmistakable break point at the click removes the guesswork of judging torque by feel, which is what a calibrated bolted joint actually requires.
• Size the wrench so the target torque falls in the middle third of its scale — working near either end of the range degrades accuracy.

Available From: Bin Moqhem Construction And Development EST. — +966 11 291 9154

Tolsen Ring Slogging Wrench 36 mm

• Type: Flat-pattern box-end slogging wrench | Standard: Based on DIN 7444 | Material: Forged carbon steel, hardened and tempered, black phosphate finish | Length Tolerance: ±5 mm.
• Designed to take repeated hammer strikes on the flat striking face without the head cracking, unlike a chrome-plated wrench pressed into the same job.
• Handy where there is not enough swing room for a breaker bar, since the wrench itself stays compact while the hammer supplies the extra force.

Available From: Al Tuwaijri Industrial Equipment Company — +966 11 446 6222

Hydraulic Torque Wrench Manufacturers Equipment

• Type: Pump-driven hydraulic torque tool with reaction arm | Power: Hand or electric hydraulic pump | Output: Typically several thousand up to tens of thousands of Nm depending on cassette size | Drive: Square or hex cassette, sized to the application.
• Removes the fatigue and repeatability problems of large manual wrenches on multi-bolt flange work, where every bolt in the pattern needs the same torque in sequence.
• Selection comes down to required torque and available reaction clearance around the bolt — both should be confirmed with the supplier before ordering a cassette.

Available From: Bin Moqhem Construction And Development EST. — +966 11 291 9154

Wrenches for Water Utility, Irrigation & Facility Maintenance

For water utility crews, landscaping contractors and facility teams servicing valves, hydrants and fittings that a general wrench set is not shaped to reach.

AVK Operating And Seat Wrench 150 mm

• Type: Dual-function multi-wrench for gate valves and fire hydrants | Operating End: Turns the valve or hydrant nut for routine open/close duty | Seat End: Demounts the hydrant seat during teardown | Size: 150 mm.
• Carrying one dual-function tool instead of two separate wrenches matters on call-out work where crew load-out space is limited.
• Fit is specific to the valve or hydrant series in use, so confirm compatibility against the installed AVK model before ordering.

Available From: Shan Technical Trading Company — +966 13 830 2602

Impact Sprinkler Wrench

• Type: Multi-fit key wrench for irrigation sprinkler heads | Design: Multiple slots and notches covering common nozzle and riser patterns | Application: Adjusting, removing and servicing pop-up and impact sprinkler heads.
• One wrench covering several nozzle patterns saves a landscaping crew from carrying a separate tool for every sprinkler brand on a site.
• Worth keeping on the truck year-round, since irrigation heads clog and seize from mineral deposits even outside the main servicing season.

Available From: Youmats — +966 11 521 6216

Adjustable Hook Spanner Wrench

• Type: Hook-shaped spanner for round slotted or notched nuts | Design: Curved hook engages a notch on the nut face rather than clamping flats | Adjustment: Sliding pivot covers a range of nut diameters.
• Round lock nuts on bearings and pipe collars have no flats for a jaw wrench to grip, which is exactly the gap a hook spanner fills.
• Keep both a fixed and an adjustable hook spanner where possible — the fixed size seats more securely, the adjustable covers whatever size turns up unannounced.

Available From: Al Tuwaijri Industrial Equipment Company — +966 11 446 6222

Wrench Brand Comparison

Frequently Asked Questions