Cylinder Liner Suppliers in KSA
Looking for a reliable cylinder liner supplier in Saudi Arabia? This page brings together dry cylinder liners, wet cylinder liners, steel cylinder liners, air cooled cylinder liners, compressor cylinder liners, and cylinder liner sleeves currently supplied for Cummins, Caterpillar, Komatsu, Perkins, Kirloskar, and other diesel engines used across trucks, tractors, generators, marine equipment, and heavy machinery.
Popular Cylinder Liner Types Available in Saudi Arabia
These are the cylinder liner types buyers in Saudi Arabia search for most. Each one is explained in simple terms below, along with typical pricing.
Dry Cylinder Liners
- A dry cylinder liner sits inside the engine block without direct contact with the coolant, relying on the block itself for heat transfer.
- Often supplied in aluminum or wear-resistant alloy for weight-sensitive applications such as automobiles and light trucks.
- Chosen when block strength is already sufficient and the goal is a precision-fit sleeve for wear resistance, corrosion resistance, and heat resistance.
- Minimum order quantity for dry cylinder liners is typically 300 pieces when ordering directly from a manufacturer.
- Supplier: confirm current stock with the suppliers listed in the directory below
- Indicative price: SAR 150 to SAR 500 per piece
Wet Cylinder Liners
- A wet cylinder liner has its outer surface in direct contact with engine coolant, which improves heat dissipation on high-load diesel engines.
- Commonly supplied in mild steel and used across trucks, buses, tractors, generators, and marine engines.
- Because coolant touches the liner directly, correct sealing and installation matter more here than on a dry liner.
- Minimum order quantity for wet cylinder liners is typically 500 pieces when ordering directly from a manufacturer.
- Supplier: confirm current stock with the suppliers listed in the directory below
- Indicative price: SAR 200 to SAR 700 per piece
Steel Cylinder Liners and Cast Iron Cylinder Sleeves
- Steel cylinder liners and cast iron cylinder sleeves are the standard choice for heavy-duty diesel engines because of their strength and long service life.
- Cast iron is generally preferred for lower cost and good wear resistance, while hardened steel liners handle higher pressure and temperature.
- Suited for trucks, buses, agriculture equipment, earth moving machines, and stationary diesel engines.
- Supplier: confirm current stock with the suppliers listed in the directory below
- Indicative price: SAR 180 to SAR 600 per piece
Air Cooled Cylinder Liners
- Air cooled cylinder liners are built with external fins or ribbing to dissipate heat directly into the surrounding air instead of through a coolant jacket.
- Common on smaller stationary diesel engines, generators, and 2 to 3 wheeler engines where a liquid cooling system is not practical.
- Lower maintenance than wet-liner systems since there is no coolant circuit to service around the liner itself.
- Supplier: confirm current stock with the suppliers listed in the directory below
- Indicative price: SAR 120 to SAR 400 per piece
Compressor Cylinder Liner
- A compressor cylinder liner is built for the higher friction and pressure conditions inside air and gas compressors rather than combustion engines.
- Usually specified by industrial and oil and gas sector buyers maintaining compressor stations and process equipment.
- Fit and bore tolerance are especially critical here, so always match liner dimensions to the exact compressor model.
- Supplier: confirm current stock with the suppliers listed in the directory below
- Indicative price: SAR 250 to SAR 900 per piece
Ceramic Cylinder Liners
- Ceramic coated or ceramic composite cylinder liners are a premium option chosen for extra wear resistance in high performance or high duty cycle engines.
- They typically cost more than standard cast iron or steel liners, but reduce wear-related maintenance over the engine's life.
- Best suited for buyers running engines under continuous heavy load, such as marine and stationary power generation.
- Indicative price: SAR 500 to SAR 1,800 per piece
2 Stroke Cylinder Liner and 4HF1 Cylinder Liner
- A 2 stroke cylinder liner is built with port openings for a 2-stroke engine cycle, common in older marine and small industrial engines.
- The 4HF1 is a specific Isuzu engine reference that buyers search for when replacing a liner on that engine family.
- Always confirm the exact engine model and port layout before ordering, since 2-stroke liners are not interchangeable with standard 4-stroke liners.
- Supplier: confirm current stock with the suppliers listed in the directory below
- Indicative price: SAR 200 to SAR 650 per piece
Round Cylinder Liner and Cylinder Liner Sleeves
- A round cylinder liner is the standard cylindrical sleeve form used across the majority of automotive and industrial diesel engines.
- Cylinder liner sleeves is the general term buyers search for when they need a replacement bore sleeve rather than a full engine rebuild kit.
- Confirm bore diameter, wall thickness, and overall length against your engine's service manual before ordering.
- Supplier: confirm current stock with the suppliers listed in the directory below
- Indicative price: SAR 150 to SAR 550 per piece
Products Available Through Verified Suppliers
Below are specific cylinder liner models and part references currently searched for by buyers, with specifications and indicative pricing for each one.
Cylinder Liner Assy HP - D100801.50
Power cylinder liner reference
- A power cylinder liner assembly listed under part reference D100801.50.
- Typically specified when replacing an existing liner assembly by exact part number rather than by generic size.
- Confirm the full assembly part number against your engine's parts catalog before ordering, since HP-prefixed references are model specific.
- Supplier: available through the suppliers listed in the directory below
- Indicative price: SAR 200 to SAR 600
Wet Cylinder Liner - Mild Steel, 75mm Width, 32mm Stroke
Key Specifications
| Material |
Mild Steel |
| Width |
75mm |
| Stroke |
32mm |
- A mild steel wet cylinder liner sized for medium-frame diesel engines.
- The 75mm width and 32mm stroke figures should be checked against your engine's bore and stroke specification before ordering.
- Supplier: available through the suppliers listed in the directory below
- Indicative price: SAR 220 to SAR 550
Kirloskar Cylinder Liners (Multiple Models)
Make: Kirloskar
BRAND: KIRLOSKAR
- Model 1040 4R 2H.008.01.0.00: a 105mm generator cylinder liner, built for Kirloskar genset engines.
- Model 6KL12TASRI: a Kirloskar reference used for matching a specific engine variant by part code.
- Model 3G11-NA-G2 (with O-ring): a Kirloskar cylinder liner supplied with an integrated O-ring seal for wet-liner installations.
- All three are best ordered using the exact Kirloskar model code from your engine or generator nameplate to avoid a fitment mismatch.
- Supplier: available through the suppliers listed in the directory below
- Indicative price: SAR 300 to SAR 900 depending on model
Cylinder Liner for MMZ Tractor, OEM No. 240-1002021
- An OEM-matched cylinder liner for MMZ (Minsk Motor Works) tractor engines, referenced by OEM number 240-1002021.
- Suited to agriculture equipment buyers running MMZ-powered tractors and needing an exact OEM match rather than a generic sleeve.
- Supplier: available through the suppliers listed in the directory below
- Indicative price: SAR 180 to SAR 480
Generator Cylinder Liner NH220 743, 62-1500 KVA
Key Specifications
| Finish |
Silver Polished Alloy |
| Genset Range Covered |
62 to 1500 KVA |
- A silver polished alloy cylinder liner built for stationary generator sets across a wide power range, from small 62 KVA units up to large 1500 KVA installations.
- Marketed as durable, reliable, and efficient, suited to continuous duty power generation applications.
- Supplier: available through the suppliers listed in the directory below
- Indicative price: SAR 350 to SAR 1,200 depending on genset size
Cylinder Liner Sleeve 184400, 130.18mm
- A cylinder liner sleeve carrying part reference 184400, with a bore of 130.18mm.
- Suited to medium to large diesel engines where a precise bore diameter is critical for a proper piston fit.
- Supplier: available through the suppliers listed in the directory below
- Indicative price: SAR 300 to SAR 750
Cylinder Liner Model KT 2300 - Centrifugal Cast
Key Specifications
| Material |
Metal and Steel |
| Dimensions |
4 x 4 x 10 inches |
| Finish |
Polished, Round Shape |
- Manufactured using the centrifugal casting process, which produces a dense, uniform metal structure with fewer internal defects than a standard sand-cast liner.
- Marketed as highly durable, making it a common choice for buyers prioritizing service life over upfront cost.
- Supplier: available through the suppliers listed in the directory below
- Indicative price: SAR 400 to SAR 1,000
Dry Cylinder Liner - Aluminum
- An aluminum dry cylinder liner engineered for wear resistance, corrosion resistance, and heat resistance in a lighter weight package than a steel or cast iron liner.
- Precision engineered for automotive and light industrial applications where weight saving matters.
- Supplier: available through the suppliers listed in the directory below
- Indicative price: SAR 250 to SAR 650
Cylinder Liners by Engine Brand
Cylinder liners are usually chosen to match the engine make already installed in your vehicle or equipment. These are the engine brands most commonly matched by the suppliers on this page. Visit the official brand sites for engine documentation and genuine parts support.
Cummins
A major diesel engine manufacturer used across trucks, generators, and industrial equipment. Cummins cylinder liners are among the most frequently searched replacement references in this category.
www.cummins.com
Caterpillar
A leading brand for heavy equipment and earth moving machines, with cylinder liners needed across excavators, loaders, and generator engines.
www.caterpillar.com
Komatsu
A major earth moving and construction equipment brand, with engine overhaul parts including cylinder liners regularly needed for fleet maintenance.
www.komatsu.com
Perkins
A well known diesel and gas engine brand used in agriculture, construction, and power generation, with cylinder liners commonly sourced for genset and industrial engine rebuilds.
www.perkins.com
Volvo
Volvo engines appear across trucks, buses, and construction machinery, with cylinder liners a regular overhaul part for Volvo powered fleets.
www.volvogroup.com
Kirloskar
An Indian engine and generator manufacturer widely used in stationary power generation, with several Kirloskar model-specific cylinder liners covered earlier on this page.
www.kirloskaroilengines.com
Suppliers on this page also cover cylinder liners for Detroit Diesel, Mitsubishi (including the 4D34 engine), Hitachi, Hyundai, JCB, and Andoria engines. Confirm exact make and model compatibility directly with the supplier before ordering.
Product Comparison
| Model / Reference |
Type |
Material |
Key Size |
Indicative Price (SAR) |
Ideal For |
| Assy HP - D100801.50 |
Power Liner Assembly |
Not specified |
Not specified |
200 to 600 |
Exact part number replacement |
| Wet Liner, Mild Steel |
Wet |
Mild Steel |
75mm width, 32mm stroke |
220 to 550 |
Medium-frame diesel engines |
| Kirloskar 1040 4R |
Generator Liner |
Not specified |
105mm |
300 to 900 |
Kirloskar genset engines |
| MMZ OEM 240-1002021 |
OEM Tractor Liner |
Not specified |
Not specified |
180 to 480 |
MMZ tractor engines |
| NH220 743 |
Generator Liner |
Silver Polished Alloy |
62 to 1500 KVA range |
350 to 1,200 |
Stationary generator sets |
| Sleeve 184400 |
Sleeve |
Not specified |
130.18mm bore |
300 to 750 |
Medium to large diesel engines |
| KT 2300 |
Centrifugal Cast |
Metal and Steel |
4 x 4 x 10 inches |
400 to 1,000 |
High durability requirements |
| Dry Liner - Aluminum |
Dry |
Aluminum |
Not specified |
250 to 650 |
Weight-sensitive applications |
| 3G11-NA-G2 (O-ring) |
Wet, with O-ring |
Not specified |
Not specified |
300 to 900 |
Kirloskar engines needing sealed fit |
Prices above are indicative only, based on typical market ranges for each product type. Always confirm the exact price with the supplier before ordering.
Verified Cylinder Liner Supplier Directory
The suppliers below include Saudi-based companies as well as UAE-based suppliers who ship into the Saudi and wider GCC market. Where a Saudi office could not be verified, this is noted so you can factor shipping and lead time into your decision.
| Company |
Phone |
Verified Address |
Profile |
| Al Samed Trading Co. |
+966 11 810 2220 (official) / +966 11 446 5530 (Head Office) |
Dirar Ibn Al Azour Street, Al Khalidiyyah, Riyadh 12874, Saudi Arabia |
Heavy equipment spare parts supplier established in 1982. Specializes in Caterpillar, Cummins, and Komatsu parts, including cylinder liners, pistons, bearings, gaskets, and undercarriage parts. |
| Space Industrial Cont. Co. |
+966 13 379 0714 |
King Fahd Road, P.O. Box 60113, Dammam 31545, Saudi Arabia |
Industrial supplier and contractor serving heavy equipment, industrial, and oil and gas sectors. Limited official company information is publicly available. |
| JRS Mechanical Equipment LLC-SPC |
+971 50 245 0986 |
Hanging Garden Tower, 2nd Floor, Hamdan Bin Mohammed Street, Al Danah, Zone 1, Abu Dhabi, UAE |
Specialized supplier of OEM quality diesel engine spare parts, including cylinder liners for Cummins, Caterpillar, Perkins, Volvo, and marine applications. No verified Saudi office found; ships from Abu Dhabi. |
| MAK Heavy Equipment Machinery Spare Parts Trading LLC |
+971 56 341 9000 |
Industrial Area 3, Caterpillar Street, Before Madinah Hypermarket, Sharjah, UAE |
Heavy equipment spare parts supplier for Caterpillar, Cummins, Detroit Diesel, Volvo, Komatsu, Perkins, Hitachi, Hyundai, and JCB. UAE-based, serving GCC markets including Saudi Arabia. |
| AECO Engineering (AECOO) |
+966 9200 05155 |
Al Aziziyah, Southern Ring Road, Riyadh, Saudi Arabia |
Electrical and mechanical engineering company offering industrial projects and engineering services. Not verified as a dedicated cylinder liner manufacturer or distributor; confirm capability before ordering. |
How to Choose the Right Cylinder Liner Supplier in Saudi Arabia
- Always specify the engine make and model, such as Cummins, Caterpillar, or Komatsu, or the equipment type, such as heavy truck or industrial generator, when requesting a quote.
- Confirm whether you need a dry or wet liner, since the two are not interchangeable and installation differs between them.
- Check bore diameter, wall thickness, width, and stroke length against your engine's service manual before ordering.
- For critical applications such as marine, gensets, or continuous duty industrial engines, ask whether the liner is centrifugal cast, since this generally means a denser, more durable part.
- Confirm the minimum order quantity early. Dry cylinder liners often carry a 300 piece minimum and wet cylinder liners a 500 piece minimum when ordering direct from a manufacturer, so smaller buyers should ask about trading company stock instead.
- UAE-based suppliers on this list serve the Saudi market from Abu Dhabi and Sharjah. Factor in cross-border shipping time and customs when comparing them to Saudi-based suppliers.
- Where a supplier's core business is not clearly cylinder liners, such as a general engineering or electrical contractor, confirm their capability and stock directly before relying on them for this part.
- Get quotes from more than one supplier in the directory above to compare price, lead time, and OEM matching accuracy.
Cylinder Liner Price Guidance in Saudi Arabia
Entry Level (standard automotive and light equipment liners)
SAR 120 to SAR 400
Industrial Grade (branded engine and generator liners)
SAR 300 to SAR 1,200
Premium (centrifugal cast and ceramic coated liners)
SAR 1,200 to SAR 1,800
Prices are indicative only. Request an exact quote from the supplier before ordering.
Frequently Asked Questions
What is the minimum order quantity (MOQ) for cylinder liners?
When ordering directly from a manufacturer, the minimum order quantity is typically 300 pieces for dry cylinder liners and 500 pieces for wet cylinder liners. Smaller buyers can usually purchase lower quantities through a trading company or distributor holding stock, so ask the supplier which route applies to your order.
What composition materials are available for cylinder liners?
Common materials include cast iron, hardened alloy steel, aluminum, and ceramic-coated composites, each suited to a different balance of weight, cost, and wear resistance. Confirm which material options a specific supplier can offer for your engine model before ordering.
Do suppliers also manufacture cylinder heads?
Some heavy equipment spare parts suppliers, such as those carrying full engine overhaul kits, also stock cylinder heads alongside liners, pistons, bearings, and gaskets. Confirm directly with the supplier whether cylinder heads are available for your engine make.
Do suppliers offer cylinder liner dealership or distributorship?
Some manufacturers offer dealership or distributorship arrangements to buyers looking to resell in their region. This is not confirmed for every supplier listed on this page, so raise it directly in your first conversation with the supplier.
What is the Centrifugal Casting Process (CCP) and do suppliers manufacture liners this way?
Centrifugal casting spins molten metal in a rotating mold, which pushes impurities toward the center and produces a denser, more uniform liner wall than standard casting. The KT 2300 model covered on this page is an example of a centrifugal cast liner. Ask any supplier directly whether their specific liner is centrifugal cast if this matters for your application.
Can I get custom cylinder liners made?
Manufacturers with in-house casting capability can generally produce custom sizes and materials, usually against a minimum order quantity. Trading and distribution suppliers are better suited to matching an existing OEM reference. Confirm custom manufacturing capability with the supplier directly.
Do suppliers offer private label cylinder liners?
Some manufacturers can supply private label or unbranded packaging for bulk orders. This depends on the individual supplier's production setup, so confirm directly and expect it to apply mainly to larger volume orders rather than single-piece purchases.
Who are the best cylinder liner suppliers in KSA?
The right supplier depends on your engine brand, order quantity, and whether you need a Saudi-based or GCC-wide shipping option. Al Samed Trading Co. in Riyadh has the longest track record on this page, established in 1982, while Space Industrial Cont. Co. in Dammam and the UAE-based JRS Mechanical and MAK Heavy Equipment also serve diesel cylinder liner buyers in Saudi Arabia. Compare quotes from more than one before deciding.
Where are cylinder liners used?
Automobiles, tractors, trucks and buses, heavy equipment and earth movers, marine engines, gensets, 2 and 3 wheelers, and stationary diesel engines. In each case the cylinder liner protects the engine block from wear, since it is designed for low wear and tear, robust performance, long life, and low maintenance compared to running the piston directly against the block.
