Safety Chain Suppliers in KSA | Plastic Barrier Chains, Steel, Stainless & Heavy-Duty Industrial Chains
Find safety chain suppliers in KSA for plastic barrier chains, steel and galvanized chains, stainless steel chains, Grade 80 lifting chain, chain locks, door safety chains, clevis hooks and chain blocks. Compare chain types, sizes, materials, load ratings and indicative SAR prices, then contact safety chain suppliers in Saudi Arabia directly through FYIND to confirm stock and request a quotation for your site, warehouse or project.
Leading safety and industrial chain suppliers in Saudi Arabia: Quick Summary
- Riyadh suppliers on this page: Sindal Trading Company (Al Azeeziya), Tops Fireman For Safety Tools And Materials, Safety Concept Trading Company and Himayat Al Turuq Company (HTC), all on or near Dhahran Street, Malaz.
- Plastic safety chains: 6 mm and 8 mm polyethylene chain in red/white and yellow/black, usually 10 m or 25 m bags, for barriers, car parks and crowd control.
- Steel and stainless chains: galvanized and stainless chains for security, marking and marine use; certified Grade 80 or Grade 100 alloy chain only for lifting.
- Indicative prices: plastic chain 6 mm × 25 m about SAR 25–60; door safety chains SAR 10–60; galvanized chain SAR 5–30 per metre; Grade 80 lifting chain SAR 40–150 per metre.
- HS code: iron and steel chain falls under HS 7315, plastic chain generally under HS 3926.
Match Your Job to the Right Safety Chain Before You Read Anything Else
| If Your Job Is… | You Need a… | Available From |
|---|---|---|
| Marking work zones, car parks or queues | Plastic Barrier Chain, 6–8 mm, Red/White or Yellow/Black | Himayat Al Turuq Company (HTC): +966 58 129 1302 |
| Site safety and PPE orders with barrier chain | Plastic Safety Chain with Cones or Stanchions | Tops Fireman For Safety Tools And Materials: +966 53 100 0540 |
| Securing gates, equipment or cylinders | Galvanized Steel Chain with Chain Lock | Safety Concept Trading Company: +966 53 360 9744 |
| Door security for homes and offices | Door Safety Chain / Door Guard | Sindal Trading Company: +966 54 750 6514 |
| Lifting and rigging loads | Certified Grade 80 / 100 Alloy Chain and Hooks | Industrial rigging suppliers (see below) |
| Marine, food or corrosive areas | Stainless Steel Chain (304 / 316) | Industrial rigging suppliers (see below) |
Safety Chain Suppliers in KSA with Contact Numbers
Himayat Al Turuq Company (HTC): Plastic Barrier and Traffic Safety Chain Supplier in Riyadh
RIYADH · Dhahran Street · Traffic and road safety products · Plastic barrier chains
Phone: +966 58 129 1302 | Address: Dhahran Street, Riyadh, KSA
Products and Services
- Products: Plastic barrier chains in black/yellow and red/white, KMR yellow and black plastic chain in 6 mm and 8 mm × 25 m, and related road safety items; confirm current stock by phone.
- Buyers: Contractors, municipalities, car park operators and event organisers.
Price Range
Plastic safety chain about SAR 25–90 per 25 m bag depending on link size
Why Choose HTC
- Traffic Safety Focus: A natural first call for plastic safety chain used with cones, bollards and barriers.
- Location: Dhahran Street, alongside other Riyadh safety suppliers.
- Contact: Mobile: +966 58 129 1302.
Tops Fireman For Safety Tools And Materials: Safety Equipment and Chain Supplier in Riyadh
RIYADH · Dhahran Street, Malaz · Fire, safety tools & site safety materials
Phone: +966 53 100 0540 | Address: Dhahran Street, Malaz, Riyadh, KSA
Products and Services
- Products: Safety chains, barrier accessories, PPE and fire and safety tools; confirm current chain types and sizes by phone.
- Buyers: Safety officers, facility managers and contractors equipping sites.
Price Range
Quote-based; plastic safety chains typically SAR 25–90 per bag
Why Choose Tops Fireman
- One Safety Order: Combine barrier chains with PPE and fire safety items in one purchase.
- Location: Malaz, central Riyadh.
- Contact: Mobile: +966 53 100 0540.
Safety Concept Trading Company: Safety Chain and Site Safety Supplier in Riyadh
RIYADH · Dhahran Street, Malaz · Safety products & site marking
Phone: +966 53 360 9744 | Address: Dhahran Street, Malaz, Riyadh, KSA
Products and Services
- Products: Plastic and steel safety chains, chain locks and site safety products; confirm current stock by phone.
- Buyers: Construction sites, warehouses and facility managers.
Price Range
Quote-based by chain type, size and quantity
Why Choose Safety Concept Trading Company
- Safety Specialist: Focused on safety products for sites and facilities.
- Location: Dhahran Street, Malaz, near other safety suppliers for easy comparison.
- Contact: Mobile: +966 53 360 9744.
Sindal Trading Company: Safety Chain and Hardware Supplier in Riyadh
RIYADH · Al Azeeziya, Baladiya Street · Safety chains & general hardware
Phone: +966 54 750 6514 | Address: Door No. 18, 1st Floor, Al Othman Center, Baladiya Street, Al Azeeziya, Riyadh, KSA
Products and Services
- Products: Safety chains, door chains and general hardware; confirm current range by phone.
- Buyers: Contractors, facility teams and trade buyers in south Riyadh.
Price Range
Quote-based by product and quantity
Why Choose Sindal Trading Company
- South Riyadh Location: Al Azeeziya, convenient for buyers in the south of the city.
- Trade Orders: Suited to repeat and bulk hardware orders.
- Contact: Mobile: +966 54 750 6514.
Safety Chain Products Available in KSA
| Product | Key Details | Typical Use | Approx. Price (SAR) |
|---|---|---|---|
| Plastic Barrier Chains Black Yellow 10 m | Black/yellow plastic link chain, 10 m | Hazard marking, workshops | 15–35 |
| Plastic Chain PCY | Plastic safety chain | Barriers and cordons | 20–50 |
| Plastic Barrier Chain 0.5 kg, 30 × 30 × 5 cm | Packed size as listed, about 0.5 kg | Light barriers and queue lines | 15–35 |
| KMR Yellow and Black Plastic Chain 6 mm × 25 m | 6 mm links, 25 m bag | Car parks, work zones | 25–60 |
| KMR Yellow and Black Plastic Chain 8 mm × 25 m | 8 mm heavier links, 25 m bag | Road works, outdoor sites | 40–90 |
| Black Safety Chain | Plain black chain | Decorative barriers, lobbies | Quote-based |
| Plastic Barrier Chains Red White | Red/white plastic chain | Crowd control, events, restricted areas | 25–60 |
How to Find Safety Chain Manufacturers and Suppliers in KSA?
- What Buyers Need: The right chain type for the job, in stock, at a fair price. Most searches are for plastic barrier chain, steel security chain or certified lifting chain, and each comes from a different kind of supplier.
- Where to Look: Riyadh safety and traffic suppliers for plastic and general safety chains; industrial rigging suppliers for lifting chain, hooks and chain blocks.
- Manufacturers: Most chain sold in the Kingdom is imported and stocked by distributors. Safety chain manufacturers in Saudi Arabia are few, so buying from established safety chain distributors in KSA is usually faster.
- On FYIND: This page lists safety chain suppliers in KSA with addresses and direct phone numbers. Call or WhatsApp two or three to confirm stock and request a quote.
Available From: Sindal Trading Company: +966 54 750 6514 | Tops Fireman For Safety Tools And Materials: +966 53 100 0540 | Safety Concept Trading Company: +966 53 360 9744 | Himayat Al Turuq Company (HTC): +966 58 129 1302
How to Choose a Reliable Safety Chain Supplier in KSA?
- Match the Supplier to the Chain: Safety and traffic suppliers for plastic chain; hardware traders for door and security chains; rigging specialists for lifting chain.
- Check: Clear product description (material, link size, length), stock availability, delivery time and, for lifting chain, test certificates.
- Red Flag: Any supplier offering lifting chain without a grade marking or certificate.
- Next Step: Send the same requirement to several FYIND suppliers and compare written quotes.
Available From: Sindal Trading Company: +966 54 750 6514 | Tops Fireman For Safety Tools And Materials: +966 53 100 0540 | Safety Concept Trading Company: +966 53 360 9744 | Himayat Al Turuq Company (HTC): +966 58 129 1302
Are Steel Safety Chain Suppliers in KSA Suitable for Heavy-Duty Applications?
- It Depends on the Chain: Galvanized or mild steel chain (such as DIN 766 short link) is for securing, barriers and light duty; it is not rated for overhead lifting.
- For Heavy Duty: Use Grade 80 (EN 818-2) or Grade 100 alloy chain with a stamped working load limit (WLL) and test certificate. For example, 10 mm Grade 80 chain has a WLL of about 3.15 tonnes.
- What to Ask Steel Safety Chain Suppliers in KSA: Chain grade, diameter, WLL, finish and certificate before ordering.
Available From: Safety Concept Trading Company: +966 53 360 9744 | Sindal Trading Company: +966 54 750 6514
Can Heavy-Duty Safety Chain Suppliers in KSA Support Industrial Rigging Requirements?
- Rigging Needs: Chain slings (1–4 legs), master links, hooks, shackles, shorteners and chain blocks, all matched in grade.
- Who to Use: Heavy duty safety chain suppliers in KSA that specialise in rigging, such as Eastern Province rigging firms (for example Al Manar Eastern Factory, which lists alloy chain slings and states Saudi Aramco and SABIC vendor status).
- Documents: Proof load and test certificates, WLL tags on every sling, and third-party inspection where your site requires it.
- Ordering: Send load, lift configuration, reach length and number of legs so the supplier can size the sling.
How to Compare Safety Chain and Industrial Rigging Suppliers in Saudi Arabia?
- Grade and Rating: Same chain grade and WLL in every quote.
- Certification: Test certificates, tagging and inspection support.
- Range: Can the supplier provide chain, hooks, shackles and hoists as one matched set?
- Service: Stock, delivery time to site and after-sales inspection.
- Price: Compare total delivered cost, not just price per metre.
Available From: Sindal Trading Company: +966 54 750 6514 | Tops Fireman For Safety Tools And Materials: +966 53 100 0540 | Safety Concept Trading Company: +966 53 360 9744 | Himayat Al Turuq Company (HTC): +966 58 129 1302
Why Choose a Chain and Sprocket Supplier in Dammam for Industrial Applications?
- The Need: Conveyors, packaging lines, pumps and plant machinery in Dammam, Jubail and Al Khobar use roller chain and sprockets, and a breakdown needs a fast local replacement.
- Benefit of Dammam: Close to the Eastern Province’s industrial cities, so stock can reach plants the same or next day.
- Ordering: Quote the chain number (for example 40, 60, 80 ANSI or 08B, 12B ISO), number of strands, sprocket teeth, bore and keyway.
- On FYIND: Use FYIND to find Eastern Province industrial suppliers and request a quote with your chain and sprocket details.
How to Buy Stainless Steel Chain in Saudi Arabia for Industrial Applications?
- Choose the Grade: 304 for general and food use; 316 for marine, coastal and chemical areas.
- Choose the Type: Short link or long link for securing and marking; certified stainless lifting chain only where the rating is stamped.
- Specify: Wire diameter, link size, length, grade, finish (polished or plain) and whether lifting-rated.
- Price Range: About SAR 15–120 per metre depending on grade and size.
Why Are Stainless Steel Chains Used for Marine, Lifting and Industrial Applications?
- Marine: 316 stainless resists salt water and sea air on jetties, boats and coastal sites.
- Food and Pharma: Clean, rust-free and easy to wash down.
- Lifting: Stainless lifting chain is used where corrosion is severe, but it usually has a lower WLL than Grade 80 alloy chain of the same size, so check the rating.
- Appearance: Architectural and decorative barriers that must stay bright.
When Should You Choose Stainless Steel Chain Over Other Chain Materials?
- Choose Stainless: Coastal, marine, chemical, food and hygienic areas, or where rust staining is unacceptable.
- Choose Galvanized: Outdoor securing and fencing inland at lower cost.
- Choose Alloy Grade 80/100: Heavy lifting where maximum strength matters.
- Choose Plastic: Marking and crowd control where no load is carried.
Available From: Sindal Trading Company: +966 54 750 6514 | Tops Fireman For Safety Tools And Materials: +966 53 100 0540 | Safety Concept Trading Company: +966 53 360 9744 | Himayat Al Turuq Company (HTC): +966 58 129 1302
How to Select the Right Safety Chain for Your Application?
- Barrier or Marking: Plastic chain, 6 mm for indoor and light use, 8 mm for outdoor and road works.
- Securing: Galvanized or hardened steel chain with a padlock or chain lock.
- Doors: Door safety chain or door guard.
- Lifting: Certified alloy chain with matched hooks and fittings.
Available From: Sindal Trading Company: +966 54 750 6514 | Tops Fireman For Safety Tools And Materials: +966 53 100 0540 | Safety Concept Trading Company: +966 53 360 9744 | Himayat Al Turuq Company (HTC): +966 58 129 1302
What Factors Should You Check Before Buying a Safety Chain?
- Material: Plastic, galvanized steel, hardened steel, stainless or alloy.
- Size: Link or wire diameter and total length.
- Load: Working load limit, if the chain carries any load.
- Environment: UV-stabilised plastic outdoors; stainless or galvanized in wet and coastal areas.
- Colour and Visibility: Red/white or yellow/black for hazard marking.
- Certificates: Required for lifting and rigging chain.
Available From: Sindal Trading Company: +966 54 750 6514 | Tops Fireman For Safety Tools And Materials: +966 53 100 0540 | Safety Concept Trading Company: +966 53 360 9744 | Himayat Al Turuq Company (HTC): +966 58 129 1302
Can Safety Chains Be Used for Heavy-Duty Industrial Applications?
- Which Chain: Only steel chain of the right grade. Plastic safety chain is for marking and crowd control and should never carry loads.
- For Heavy Loads: Grade 80 or 100 alloy chain with stamped WLL and certificate.
- For Securing Equipment: Hardened or galvanized steel chain, sized to the item and fitted with a suitable lock.
- Before Ordering: Share load, use and environment with the supplier so they recommend the correct grade.
Available From: Safety Concept Trading Company: +966 53 360 9744 | Sindal Trading Company: +966 54 750 6514
How Do Safety Chain Locks Work and When Are They Used?
- How They Work: A hardened steel chain is passed around the item and secured with a padlock or an integrated lock, often with a fabric sleeve to protect paint.
- Typical Use: Gates, generators, gas cylinders, tools, bicycles, machinery and site equipment.
- What to Check: Link thickness (thicker resists cutting), hardened steel, lock quality and weather resistance.
Available From: Safety Concept Trading Company: +966 53 360 9744 | Sindal Trading Company: +966 54 750 6514
Are Safety Chains Suitable for Doors and Main Door Applications?
- Purpose: Safety chains for doors and main door applications let you open the door slightly to check a visitor without fully opening it.
- Types: Chain door guard, bar door guard and lockable door chains in brass, stainless or zinc alloy finishes.
- Installation: Fixed to the door and frame with screws; use longer screws into solid frame for main doors.
- Price Range: About SAR 10–60 depending on material and finish.
Available From: Sindal Trading Company: +966 54 750 6514
How to Choose the Right Plastic Safety Chain for Industrial and Crowd-Control Applications?
- Link Size: 6 mm for indoor, light and queue use; 8 mm for outdoor, road works and heavier use.
- Colour: Red/white for restricted and emergency areas; yellow/black for hazards and work zones.
- Material: Polyethylene; choose UV-stabilised chain for outdoor Saudi sun.
- Accessories: Traffic cones with chain holders, plastic stanchions, S-hooks and connecting links.
- Price Range: About SAR 25–60 for 6 mm × 25 m; SAR 40–90 for 8 mm × 25 m.
Available From: Himayat Al Turuq Company (HTC): +966 58 129 1302 | Tops Fireman For Safety Tools And Materials: +966 53 100 0540
What Are the Specifications of a 25-Metre x 6 mm Red and White Plastic Chain?
- Length: 25 m, usually supplied in a bag or coil.
- Link Size: 6 mm link thickness (approx.), lightweight.
- Material: Polyethylene, often UV-stabilised.
- Colour: Alternating red and white links for high visibility.
- Use: Cordoning off areas with cones or stanchions; not for load-bearing.
Available From: Himayat Al Turuq Company (HTC): +966 58 129 1302 | Tops Fireman For Safety Tools And Materials: +966 53 100 0540
How Does a 304 Stainless Steel Lifting Clevis Chain Hook Improve Lifting Safety?
- Design: The clevis connects directly to the chain with a pin, avoiding extra links; a spring safety latch stops the load slipping off.
- Why 304: Corrosion resistant for food, marine-adjacent and outdoor use; choose 316 for seawater.
- Check: WLL stamped on the hook, chain size and grade compatibility, working latch and no deformation.
- Price Range: About SAR 30–200 depending on size and WLL.
How to Select a Stainless Steel Chain Block for Lifting Applications in Saudi Arabia?
- When to Use: Food, pharma, marine, chemical and cleanroom areas where a standard painted hoist would corrode or contaminate.
- Specify: Capacity (commonly 0.5–5 tonnes), lift height, stainless grade of body and load chain, and trolley if needed.
- Standards: Look for compliance with EN 13157 or ASME B30.16, plus a load test certificate.
- Price Range: Standard manual chain blocks about SAR 400–2,000; stainless chain blocks about SAR 3,000–15,000.
Safety Chain HSN Code and Product Classification
How to Find the HSN Code for Safety Chains?
- Steel and Stainless Chain: HS heading 7315 (for example 7315.82 for other welded link chain, 7315.89 for other chain).
- Plastic Chain: Generally HS 3926.90 (other articles of plastics).
- Chain Blocks: HS 8425.19 (hand-operated pulley tackle and hoists).
- Confirm: Saudi Arabia uses 12-digit tariff codes; confirm with ZATCA or your customs broker before importing.
Can Safety Chains Be Used for Bracelet and Jewellery Applications?
- Different Product: A jewellery safety chain is a fine chain that links a bracelet or watch clasp to stop it falling off; it is not an industrial safety chain.
- Where to Buy: Jewellery shops and goldsmiths, not industrial suppliers.
- Classification: Precious-metal jewellery chain falls under HS 7113.
Heavy-Duty Safety Chains for Industrial Applications
- Types: Grade 80/100 alloy lifting chain, hardened security chain, stainless chain and roller chain for machinery.
- Industries: Construction, oil and gas, ports, warehouses and manufacturing.
- Must Have: Stamped grade and WLL, test certificates and matched fittings.
- Next Step: Contact industrial safety chain suppliers in Saudi Arabia through FYIND with load and application details.
Available From: Safety Concept Trading Company: +966 53 360 9744 | Sindal Trading Company: +966 54 750 6514
How Much Do Safety Chains Cost in KSA?
- Plastic Chain 6 mm × 25 m: SAR 25–60.
- Plastic Chain 8 mm × 25 m: SAR 40–90.
- Door Safety Chain: SAR 10–60.
- Galvanized Steel Chain: SAR 5–30 per metre.
- Stainless Steel Chain: SAR 15–120 per metre.
- Grade 80 Lifting Chain: SAR 40–150 per metre.
- Note: Indicative prices; request a written quote for current rates and bulk discounts.
Available From: Sindal Trading Company: +966 54 750 6514 | Tops Fireman For Safety Tools And Materials: +966 53 100 0540 | Safety Concept Trading Company: +966 53 360 9744 | Himayat Al Turuq Company (HTC): +966 58 129 1302
How to Request a Quote From Safety Chain Suppliers in KSA?
- Include: Chain type, material, link size, length or quantity, colour, WLL (for lifting) and delivery location.
- Contact: Call or WhatsApp two or three safety chain suppliers listed on FYIND.
- Ask For: Written quote with unit price, VAT, delivery charge, lead time and certificates where needed.
Available From: Sindal Trading Company: +966 54 750 6514 | Tops Fireman For Safety Tools And Materials: +966 53 100 0540 | Safety Concept Trading Company: +966 53 360 9744 | Himayat Al Turuq Company (HTC): +966 58 129 1302
Frequently Asked Questions
Who are the safety chain suppliers in Saudi Arabia?
On FYIND, safety chain suppliers in Saudi Arabia include Himayat Al Turuq Company (HTC), Tops Fireman For Safety Tools And Materials, Safety Concept Trading Company and Sindal Trading Company in Riyadh. Contact them to confirm stock and request a quotation.
What are the contact numbers for safety chain suppliers in KSA?
HTC: +966 58 129 1302 • Tops Fireman: +966 53 100 0540 • Safety Concept Trading Company: +966 53 360 9744 • Sindal Trading Company: +966 54 750 6514.
Can I use plastic safety chain for lifting?
No. Plastic chain is only for marking and crowd control. Use certified Grade 80 or Grade 100 alloy chain for lifting.
Which safety chain supplier should I call for bulk plastic chain?
Call a traffic and site safety supplier such as HTC or Tops Fireman with the link size, colour and number of 25 m bags you need, and ask for a bulk price. Safety chain suppliers Saudi Arabia-wide usually sell plastic chain by the 25 m bag, with better rates for carton quantities.
/safety-chain/6201-plastic-chain.webp)










