Oil Seal Suppliers in KSA | Industrial, Automotive & Marine Oil Seals

Oil Seal Suppliers in KSA | Rubber, NBR, Viton, PTFE, Double Lip, Cassette & Automotive Oil Seals

Find oil seal suppliers in KSA for leak-proof oil seals: single lip, double lip, metal cased, rubber covered, high-speed, high-pressure, PTFE, FKM, NBR, V-ring, cassette, split and automotive crankshaft, gearbox and wheel hub oil seals. Compare types, sizes, materials, standards, brands and indicative SAR prices, then contact rubber oil seal suppliers in Saudi Arabia through FYIND with your shaft, bore and width to confirm stock and request a quotation.

Match Your Job to the Right Oil Seal Before You Read Anything Else

Verified Oil Seal Suppliers in KSA - Find Suppliers from Dammam, Riyath

Other Seal Specialists Operating in Saudi Arabia

• AESSEAL Saudi Arabia Co Ltd: Mechanical seal manufacturer and repair centre in Dammam 2nd Industrial City (ISO 9001:2015); phone +966 13 802 4170. Contact for pump mechanical seals and bearing protectors, which replace lip oil seals on many pumps.
• EagleBurgmann Saudi Arabia: Mechanical seal manufacturer group with service centres in Al Khobar, Jubail, Yanbu and Jeddah.
• Precision Polymer Engineering (PPE), Al Khobar: High-performance O-rings, lip seals and elastomer seals for oil and gas; phone +966 59 640 0650. A specialist O-ring supplier in Saudi Arabia for FKM and FFKM grades.
• SKF Authorised Distributors: SKF oil seals (radial shaft seals, cassette seals, V-rings and SKF Speedi-Sleeve shaft repair sleeves) are sold in KSA through authorised bearing distributors, including AFI Group.

All Types Of Oil Seals Available From FYIND Suppliers

Oil seals, rubber oil seals, industrial oil seals and automotive oil seals listed by the suppliers on this page, with the best supplier to ask for each.

Additional Oil Seal Products Commonly Requested in KSA

• Double-Lip Rotary Oil Seal: Material: NBR or FKM | Design: Oil-retention lip with secondary dust lip | Temperature: Up to +120°C for NBR, higher for FKM | Suitable For: Pumps, motors, gearboxes and rotating equipment.
• Silicone Oil Seal: Material: Silicone rubber with optional metal reinforcement | Temperature: About +150°C to +200°C, compound dependent | Note: Limited suitability for some oils and fuels | Suitable For: Selected automotive components and temperature-sensitive machinery.
• High-Speed Oil Seal: Material: NBR, FKM or PTFE | Design: Low-friction radial lip | Speed: Depends on shaft size, lip design, lubrication and temperature | Suitable For: Electric motors, high-speed pumps, compressors and drives.
• Heavy-Duty Oil Seal: Material: Reinforced NBR, FKM or special elastomer | Construction: Robust lip with reinforced casing | Suitable For: Construction machinery, heavy vehicles, industrial gearboxes and hydraulic equipment.
• Custom-Made Oil Seal (OEM / ODM Oil Seal): Material: NBR, FKM, PTFE, silicone or other compound | Dimensions: Made to shaft, bore and width | Suitable For: OEM machinery, discontinued components and non-standard applications. OEM / ODM oil seal orders usually need a drawing and minimum quantity.
• Note: Specifications are indicative; confirm stock and match to the manufacturer’s catalogue before ordering.

What Types of Oil Seals Are Available in Saudi Arabia?

• Short Answer: Saudi suppliers stock all types of oil seals: single lip, double lip, rubber covered, metal cased, high-pressure, high-speed, PTFE, FKM, NBR, V-ring, cassette, dust lip, garter spring and split oil seals.
• Why the Type Matters: Each design answers a different problem: contamination, pressure, speed, heat, housing fit or access for replacement. Choosing on size alone is the most common reason a new seal leaks within weeks.
• How to Use This Section: Find the type that matches your equipment and problem, note what to check, then contact the supplier named under each type with your shaft, bore and width.

Single Lip Oil Seal For General Rotary Shaft And Gearbox Applications

• What It Is: A radial shaft oil seal with one spring-loaded sealing lip, sold under codes such as SC (rubber covered), SB (metal cased) and SA (metal cased with reinforcement).
• Problem It Solves: Keeps oil or grease inside gearboxes, pumps and bearing housings and stops slow drips that waste lubricant and damage bearings.
• Where It Works Best: Clean, indoor equipment such as enclosed gearboxes in factories, pump bearing frames inside pump rooms and machine tool spindles where dust is not a concern.
• Limits: It has no dust lip, so in sandy outdoor sites dust reaches the main lip and wears it quickly. It is also not pressure-rated beyond roughly 0.3–0.5 bar.
• What to Check: Shaft × bore × width, shaft speed, oil temperature and whether the old seal had a second lip that should be kept.
• Buying Tip: Single lip seals are slightly cheaper and have lower friction, but for most Saudi outdoor equipment a double lip seal is worth the small price difference.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

Double Lip Oil Seal For Shaft Sealing And External Contamination Protection

• What It Is: An oil seal with a main spring-loaded lip facing the oil and a second, non-sprung dust lip facing outside, most commonly sold as type TC.
• Problem It Solves: Stops oil leaking out and sand, dust and water getting in, which is the most common sealing need on Saudi construction, farm and industrial sites.
• Where It Works Best: Outdoor electric motors, gearboxes, conveyors, rotavators, compressors and pumps in workshops, factories and open yards.
• Fitting Advice: Pack the space between the two lips with grease before fitting so the dust lip does not run dry and overheat.
• What to Check: Shaft × bore × width, material (NBR for general oil, FKM for hot oil) and which side faces the oil.
• Availability: TC NBR double lip seals are the most widely stocked oil seal in Saudi Arabia, so common metric sizes are usually available the same day in Riyadh.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606

Rubber Covered Oil Seal For Secure Housing Fit And General Industrial Equipment

• What It Is: An oil seal whose metal stiffening ring is fully covered in rubber on the outside diameter (codes TC, SC, VC).
• Problem It Solves: The rubber outside gives a tight static seal in the housing bore, so oil does not creep out around the seal, even if the bore is slightly worn or rough.
• Where It Works Best: Aluminium and cast housings, gearboxes that heat up and expand, and older equipment with lightly scratched bores.
• Advantages: Easier fitting, better tolerance to thermal expansion and no corrosion of the outer case.
• What to Check: Housing bore condition and the press-fit; badly damaged bores still need repair.
• Supplier Tip: Ask for TC or SC style when replacing a seal that leaked around its outside rather than at the shaft.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606

Metal Cased Oil Seal For Pumps, Motors And Gearbox Shafts

• What It Is: An oil seal with a bare steel outer case (codes SB, TB, SA, TA) pressed directly into the housing bore.
• Problem It Solves: Gives a rigid, accurate and secure fit that does not move or twist under vibration, and keeps the lip correctly centred on the shaft.
• Where It Works Best: Precisely machined steel or cast-iron housings in pumps, motors, engines and industrial gearboxes.
• Limits: Metal-to-metal fit is less forgiving of rough bores; a thin coat of sealant on the OD may be needed. The case can rust in wet conditions.
• What to Check: Bore tolerance and finish, case material and whether a reinforced (double case) version is needed for heavy duty.
• Supplier Tip: AFI Equipment supplies metal cased NBR and FKM seals for pumps, engines and gearboxes.

Available From: AFI Equipment (Riyadh): +966 11 448 4482

High-Pressure Oil Seal For Pressurized Rotary Shaft Applications

• What It Is: A reinforced oil seal with a short, stiff lip and a supporting metal case (for example TCV or BABSL designs), rated for pressure up to roughly 5–10 bar depending on design and speed.
• Problem It Solves: Standard lip seals can only handle about 0.3–0.5 bar; above that the lip is pushed onto the shaft, overheats and leaks or turns inside out.
• Where It Works Best: Hydraulic pump and motor shafts, pressurised gearboxes and rotary equipment with pressure inside the housing.
• Hydraulic Oil Seal Types: Hydraulic systems use several seal types: high-pressure rotary oil seals on pump and motor shafts, rod and piston seals in cylinders, wipers at cylinder mouths and O-rings on static joints. Only the first is an oil seal in the strict sense.
• What to Check: Maximum pressure, shaft speed and temperature together, because the pressure rating falls as speed rises.
• Supplier Tip: Give the hydraulic pump or motor model and the part number of the old seal.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

High-Speed Oil Seal For Electric Motors And High-Speed Rotating Equipment

• What It Is: A low-friction oil seal with optimised lip geometry, usually in FKM or PTFE, for high shaft surface speeds.
• Problem It Solves: At high speed, a standard NBR lip heats up, hardens and cracks. High-speed designs reduce friction and heat so the seal lasts.
• Where It Works Best: 2-pole electric motors, compressors, spindles, high-speed pumps and industrial drives.
• How to Judge Speed: Work out surface speed: shaft diameter (mm) × RPM × 3.14 ÷ 60,000 = m/s. NBR typically suits up to about 10–12 m/s, FKM higher, PTFE higher still.
• What to Check: Surface speed, lubrication, oil temperature and shaft finish (hardened, smooth shafts last longer).
• Supplier Tip: Kyan Canon Trading and AFI Equipment can quote FKM and PTFE seals for high-speed duty.

Available From: Kyan Canon Trading Company (Riyadh): via FYIND enquiry  |  AFI Equipment (Riyadh): +966 11 448 4482

PTFE Oil Seal For High-Temperature And Chemically Aggressive Applications

• What It Is: An oil seal with a PTFE (Teflon) sealing lip, usually held in a stainless or steel case.
• Problem It Solves: Handles chemicals, solvents, dry or poorly lubricated running, very high speeds and temperatures around +200°C or more, where rubber lips fail.
• Where It Works Best: Compressors, chemical and process pumps, food machinery, high-speed shafts and equipment with aggressive fluids.
• Fitting Advice: PTFE lips are stiff and need a fitting sleeve, a clean chamfered shaft and the correct direction; they cannot be reused once removed.
• What to Check: Shaft hardness and finish, fluid, temperature and speed.
• Supplier Tip: Expect a higher price than rubber seals; Kyan Canon Trading lists PTFE oil seals in Riyadh.

Available From: Kyan Canon Trading Company (Riyadh): via FYIND enquiry

FKM Oil Seal For High-Temperature, Fuel And Chemical Applications

• What It Is: An oil seal made with fluorocarbon rubber (FKM, often called Viton), usually brown or green in colour.
• Problem It Solves: Resists hot engine and gear oil, fuels and many chemicals at around −20°C to +200°C, where NBR would harden and crack.
• Where It Works Best: Engines, hot gearboxes, compressors, chemical pumps and equipment exposed to Saudi summer heat.
• Limits: Costs 2–4 times more than NBR, is stiffer at low temperature and is not ideal for hot water or steam.
• What to Check: Maximum oil temperature and fluid type; if the old NBR seal was hard and cracked, upgrade to FKM.
• Supplier Tip: AFI Equipment and Kyan Canon Trading supply FKM oil seals.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

NBR Oil Seal For General Hydraulic Oil, Lubricant And Industrial Applications

• What It Is: The standard nitrile rubber oil seal, usually black, and the default choice for most oil seals.
• Problem It Solves: Gives reliable, low-cost sealing of mineral oils, grease and hydraulic fluid.
• Temperature Range: Approx. −30°C to +120°C; at the top of this range life drops quickly.
• Where It Works Best: Most gearboxes, pumps, motors, hydraulic equipment and vehicles.
• Limits: Poor in sunlight, ozone and some synthetic or high-temperature oils.
• Availability: The most widely stocked oil seal material in Saudi Arabia, with all common metric and inch sizes.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606

V-Ring Oil Seal For Rotary Shaft Contamination Protection

• What It Is: An all-rubber ring that stretches onto the shaft, turns with it and seals with a thin lip against a face.
• Problem It Solves: Throws off and blocks dust, sand and water before they reach the oil seal or bearing, extending their life.
• Where It Works Best: Conveyors, motors, mixers, washing equipment and rotavator oil seal positions on tillers working in dusty soil.
• Rotavator Oil Seal Tip: Rotavator gearboxes and rotor shafts usually use double lip NBR oil seals; adding a V-ring in front greatly reduces dust damage.
• What to Check: Shaft diameter, V-ring style (VA, VS or VL) and the axial width available.
• Supplier Tip: Ask AFI Equipment or Kyan Canon Trading with the shaft size or tiller model.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

Cassette Oil Seal For Heavy-Duty Axles, Hubs And Off-Road Equipment

• What It Is: A unitised seal with its own running sleeve and several lips, so the lip runs on the sleeve, not on the shaft.
• Problem It Solves: Seals wheel hubs and axles in mud, sand and water and stops shaft grooving, a frequent problem on trucks and site machines.
• Where It Works Best: Trucks, tractors, earthmovers, agricultural machines and off-road equipment.
• Advantages: Longer life, protected shaft and easier correct fitting as one unit.
• What to Check: Equipment make and model and OEM part number, as cassettes are model-specific.
• Supplier Tip: Najem Al Remal for vehicle hubs; AFI Equipment for SKF and industrial cassette seals.

Available From: Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369  |  AFI Equipment (Riyadh): +966 11 448 4482

Dust Lip Oil Seal For Rotating Equipment Operating In Dusty Environments

• What It Is: An oil seal with an extra outward-facing dust lip, and sometimes extra lips for heavy contamination.
• Problem It Solves: Stops abrasive dust wearing the main lip and scoring the shaft, a leading cause of leaks in Saudi conditions.
• Where It Works Best: Construction, agricultural, mining, cement and outdoor equipment.
• Fitting Advice: Grease between the lips and clean the shaft and housing before fitting.
• What to Check: How heavy the contamination is; very dusty duty may need a dust lip seal plus a V-ring.
• Supplier Tip: Kyan Canon Trading lists dust-exclusion oil seals in NBR and FKM.

Available From: Kyan Canon Trading Company (Riyadh): via FYIND enquiry  |  AFI Equipment (Riyadh): +966 11 448 4482

Oil Seal With Garter Spring For Improved Shaft Lip Contact

• What It Is: An oil seal with a coiled steel garter spring around the back of the lip.
• Problem It Solves: Keeps steady lip pressure on the shaft as the rubber ages and wears, and follows small shaft run-out.
• Where It Works Best: Almost all oil-lubricated seals in gearboxes, pumps, motors and engines.
• When No Spring Is Used: Grease-only bearings and low-speed duty may use seals without a spring, which have lower friction.
• What to Check: Spring material (carbon steel or stainless for wet or chemical duty) and that the spring side faces the oil.
• Supplier Tip: Most stocked TC and SC seals already include a garter spring.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

Split Oil Seal For Large Shafts And Difficult Maintenance Applications

• What It Is: An oil seal cut through once so it can be wrapped around the shaft and joined in place.
• Problem It Solves: Lets you replace seals on large shafts without removing couplings, bearings or gearboxes, saving days of downtime.
• Where It Works Best: Large gearboxes, rolling mills, crushers, paper and cement plant drives and marine propeller shafts above about 200 mm.
• Limits: Usually lower speed and pressure capability than solid seals, and often needs a cover plate to hold it.
• What to Check: Shaft size, housing depth, speed and need for a retaining plate.
• Supplier Tip: Bin Dayel can quote custom and split seals; AFI Equipment for branded split seals.

Available From: Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606  |  AFI Equipment (Riyadh): +966 11 448 4482

Which Oil Seal Brands Are Available in Saudi Arabia?

• Short Answer: SKF, NOK, Trelleborg, Parker, Freudenberg/Simrit and Hallite are the main premium oil seal brands in Saudi Arabia, with National, TTO and Dichtomatic also widely sold.
• Why Brand Matters: Premium brands use consistent rubber compounds and accurate lip geometry, which gives longer life on critical equipment. Lower-cost brands suit non-critical, frequently changed seals.
• How to Buy Branded Seals: Ask for the brand part number and confirm the supplier is an authorised distributor so the seal is genuine.

• Which Company’s Oil Seal Is Best?: For industrial and OEM duty, SKF, NOK, Freudenberg/Simrit and Trelleborg are the most trusted. For American vehicles National is a common match; TTO is a lower-cost option for general replacements. The best seal is the one that matches your size, material and duty, so compare like for like.
• Skf Oil Seals: Saudi listings include SKF 30 × 52 × 10 mm, 55 × 80 × 10 mm and 100 × 125 × 12 mm oil seals. SKF Speedi-Sleeve is a thin sleeve that repairs a grooved shaft without machining, so the new seal runs on a fresh surface.
• Oil Seal Sourcing | National Oil & TTO Oil Seals: For National oil seals, ask automotive parts suppliers such as Najem Al Remal with the National part number. For TTO oil seals, ask general trading suppliers such as Bin Dayel and confirm the size cross-reference.
• Brand Equivalents: If a brand is out of stock, suppliers can offer an equivalent with the same dimensions, type and material; ask them to confirm in writing.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606

Oil Seal Size Available From Saudi Suppliers

• How Oil Seals Are Sized: Every oil seal is described by three numbers: shaft diameter × housing bore diameter × seal width.
• Example: 30 × 52 × 10 mm means a 30 mm shaft, a 52 mm housing bore and a 10 mm wide seal.
• Metric and Inch Sizes: Saudi suppliers list standard metric sizes for European and Asian machines and inch sizes for American vehicles and equipment.
• Size Range: Stock usually runs from about 10 mm shafts for small motors up to 200 mm and beyond for heavy-duty gearboxes, with split or custom seals for larger shafts.
• Catalogue Examples: Saudi listings include 30 × 52 × 10 mm, 55 × 80 × 10 mm and 100 × 125 × 12 mm SKF oil seals.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369

Which Oil Seal Dimensions Should You Check Before Buying?

• Short Answer: Check shaft diameter, housing bore and width first, then lip diameter, garter spring and seal direction. Getting any one wrong causes leaks.
• Why It Matters: A seal only 0.5 mm too large on the shaft will not grip, and one too small in the bore will spin or push out.

• Measure, Don’t Guess: Measure the shaft and bore, not just the old seal, because a used seal shrinks, swells or wears.
• Width Flexibility: A slightly narrower seal can fit, but never a wider one than the housing depth allows.
• Ask the Supplier: Send the three numbers plus a photo of the old seal to confirm before ordering.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369

How to Choose the Right Oil Seal Material?

• Short Answer: Choose the material by oil or fluid, temperature, speed and environment: NBR for general oil up to about +120°C, FKM for hot oil and fuel up to about +200°C, PTFE for chemicals and high speed, ACM for automotive transmissions.
• Most Common Mistake: Using NBR on hot engines or gearboxes in Saudi summers, where it hardens and cracks; FKM lasts much longer in these duties.
• Oil-Lubricated Seals: Most oil seals depend on a thin oil film under the lip to stay cool. Dry or grease-only duty needs PTFE or a special low-friction lip.

• Saudi Listings: Current Saudi oil-seal listings include NBR, FKM, ACM and PTFE radial shaft seals, chosen by temperature, fluid and operating conditions.
• EPDM Warning: EPDM is good for water and weather but swells in mineral oil, so it is not used for normal oil seals.
• Ask for Compatibility: If you use synthetic, food-grade or fire-resistant oil, tell the supplier so they can confirm the compound.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369

Oil Seal Standards

• Short Answer: Most industrial oil seals follow DIN 3760 or ISO 6194, inch seals suit American equipment, and JIS seals suit Japanese machinery and vehicles.
• Why It Matters: Matching the standard ensures the seal type, size and tolerance fit your housing without modification.

• DIN Type Codes: DIN type A matches rubber covered single lip (SC), AS matches double lip (TC), B and BS are metal cased versions.
• Inch Equipment: American trucks, pumps and older imported machines often need inch seals; do not force a near metric size.
• Japanese Equipment: JIS designs from NOK suit Toyota, Komatsu and other Japanese machines.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

How To Choose The Right Oil Seal?

• 1. Measure the Shaft: Measure the shaft diameter accurately rather than relying only on the old seal marking, which may be worn or wrong.
• 2. Measure the Housing Bore: The bore sets the correct outside diameter; a loose seal will spin or leak around the OD.
• 3. Check the Width: Confirm the seal width and depth available in the housing.
• 4. Single or Double Lip: Choose double lip when dust, sand or water is present, which is most Saudi outdoor equipment.
• 5. Select the Material: Match it to the oil or fluid, temperature and environment: NBR, FKM, PTFE or ACM.
• 6. Check Shaft Speed: High surface speed may need a low-friction FKM or PTFE design.
• 7. Check Pressure: Standard radial lip seals handle very little pressure; pressurised duty needs a pressure-rated seal.
• 8. Inspect the Shaft: Check for wear grooves; use a repair sleeve or position the new lip on unworn shaft.
• 9. Check Spring and Lip Direction: The garter spring and main lip face the oil side.
• 10. Confirm Standard and Part Number: Quote the OEM or brand part number when replacing an OEM seal.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

Oil Seal Stock Availability for Urgent Industrial Requirements

• Short Answer: Common TC and SC NBR sizes are usually in stock in Riyadh for same-day collection; branded, FKM and large sizes may take longer.
• Common Sizes: Small and medium metric NBR seals (10–100 mm shafts) are the most widely stocked.
• Branded and Viton: Ask AFI Equipment for SKF, Parker and FKM seals; some sizes may come from its Dammam or other branch stock.
• If Out of Stock: Ask for an equivalent brand with the same size, type and material, or a slightly narrower width if the housing allows.
• Urgent Ordering Tip: Call with the exact size, material and quantity rather than a description, so the supplier can check stock in minutes.
• Plan Ahead: Keep spare seals for critical pumps, gearboxes and motors to avoid shutdowns.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

How to Find Reliable Oil Seal Suppliers in Saudi Arabia?

• Short Answer: Match the supplier to your equipment, check brands and stock, and compare quotes through FYIND.
• Start With the Equipment: Industrial, marine and automotive oil seals are sold through different suppliers: AFI Equipment for industrial, Bin Dayel for marine, Najem Al Remal for vehicles.
• Use FYIND: Search FYIND for the exact product and city to see oil seal suppliers in KSA with their contact numbers and product lists.
• Check Brands and Origin: Reliable suppliers tell you the brand, country of origin and cross-reference sizes clearly.
• Ask for Size Confirmation: A good supplier checks shaft, bore and width and asks about the duty before quoting.
• Compare Quotes: Send the same details to two or three suppliers and compare brand, price and delivery time.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369

What Should You Check Before Choosing an Oil Seal Supplier in KSA?

• Brand Authorisation: Ask whether the supplier is an authorised distributor for SKF, NOK, Parker or other brands, so the seal is genuine.
• Stock Range: Confirm they hold your size range in the right material (NBR, FKM, PTFE), not only general NBR.
• Technical Help: Check they can advise on lip type, material, speed and pressure rating.
• Delivery and Location: Confirm stock location and delivery time to your site or city.
• Documents: For projects, ask for datasheets, certificates of origin and invoices with part numbers.
• Returns: Ask about returns or exchanges if the size is wrong.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

Can Oil Seal Suppliers Help Select the Right Seal for Your Equipment?

• Short Answer: Yes. Most suppliers can identify the right oil seal from the old seal, the equipment model or the part number.
• What to Share: The old seal or a clear photo, shaft × bore × width, oil type, temperature, speed and pressure.
• Industrial Equipment: AFI Equipment supports hydraulic, pneumatic and power transmission equipment and can suggest brand equivalents.
• Vehicles: Najem Al Remal matches seals by make, model, year and engine code.
• Special Duties: Kyan Canon Trading can advise on PTFE and FKM seals for heat, chemicals and speed.
• Benefit: Correct selection avoids repeat failures and extra downtime.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

Do KSA Suppliers Stock Oil Seals for Industrial and Heavy-Duty Machinery?

• Short Answer: Yes. Heavy-duty oil seals up to 200 mm and above are available, plus split and custom seals for larger shafts.
• Typical Equipment: Crushers, industrial gearboxes, earthmovers, trucks, marine shafts, cement and mining equipment and large pumps.
• Heavy-Duty Options: Reinforced metal cased seals, cassette seals for hubs, FKM seals for hot gearboxes and multi-lip dust seals.
• Industrial Suppliers: AFI Equipment for branded industrial seals; Bin Dayel for marine and custom heavy-duty seals.
• Tip: Give the machine model and OEM part number, as heavy equipment seals are often model-specific.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606

How to Compare Oil Seal Suppliers by Brand, Material, Size and Availability?

• Brand: Compare like for like: SKF with SKF, or an agreed equivalent of the same quality tier.
• Material: Check which suppliers offer NBR, FKM, PTFE and ACM in your size.
• Size: Confirm metric, inch and JIS ranges, and whether large or split seals are available.
• Availability: Ask what is in stock today versus imported, and the lead time.
• Price: Compare total cost including delivery, not only unit price.
• Use This Page: The products table above shows which FYIND supplier to ask for each oil seal.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

Sourcing Oil Seals for Industrial Equipment Across Saudi Arabia

• Riyadh: AFI Equipment, Bin Dayel, Najem Al Remal and Kyan Canon Trading cover industrial, marine, automotive and PTFE oil seals.
• Eastern Province: AFI Group head office in Dammam; AESSEAL in Dammam and PPE in Al Khobar for mechanical and specialist seals.
• Western Region: AFI service workshops in Jeddah and Yanbu, with nationwide delivery from Riyadh suppliers.
• Bulk and Shutdowns: Send a full seal list before maintenance shutdowns so suppliers can source branded or large sizes in time.
• Approved Vendors: Oil and gas and petrochemical sites may require approved vendor documents; ask suppliers early.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606

What Information Do You Need Before Ordering an Oil Seal?

• Size: Shaft × bore × width in mm or inches.
• Type: Single lip, double lip, metal cased, rubber covered, cassette, V-ring or split.
• Material: NBR, FKM, PTFE, ACM or silicone, based on oil and temperature.
• Duty: Oil type, maximum temperature, shaft speed (RPM) and any pressure.
• Reference: Brand and part number, equipment make and model, and a photo of the old seal.
• Order Details: Quantity, delivery city and urgency.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369

When Should You Choose a Single-Lip or Double-Lip Oil Seal?

• Single Lip: Clean, indoor equipment with low contamination, where slightly lower friction and heat matter.
• Double Lip: Outdoor, dusty, sandy or wet conditions, which covers most construction, farm and site equipment in KSA.
• High Speed: Single lip runs cooler at high speed; add a separate V-ring for dust protection instead of a second lip.
• Cost: Double lip seals usually cost only a little more than single lip.
• Fitting: Grease the space between the lips on a double lip seal.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606

Viton (FKM) Oil Seals for High-Temperature and Chemical Applications

• Where Used: Engines, hot gearboxes, compressors, chemical pumps and equipment exposed to high ambient heat.
• Benefit: Handles about −20°C to +200°C and resists fuels, synthetic oils and many chemicals.
• Signs You Need FKM: The old NBR seal is hard, cracked or shiny on the lip.
• Limits: Not ideal in steam or hot water, and stiffer in cold service.
• Typical Price: Usually 2–4 times the price of the same size in NBR.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

Nitrile Rubber (NBR) Oil Seals for General Oil and Lubricant Applications

• Where Used: Most gearboxes, pumps, motors, hydraulic equipment and vehicles.
• Benefit: Good oil, grease and hydraulic fluid resistance at the lowest cost.
• Temperature Limit: About +120°C maximum; life drops sharply when hotter.
• Limits: Poor in sunlight and ozone, so store spares indoors.
• Stock: The most widely stocked oil seal material in Saudi Arabia.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369

Silicone Oil Seals for High-Temperature Sealing Requirements

• Where Used: Selected automotive and temperature-sensitive equipment.
• Benefit: Wide temperature range (about −50°C to +180°C) and flexibility at low temperature.
• Limits: Lower tear and wear strength and limited resistance to some oils and fuels.
• Tip: For hot oil service, FKM is usually the better choice; confirm oil compatibility before choosing silicone.

Available From: Kyan Canon Trading Company (Riyadh): via FYIND enquiry  |  AFI Equipment (Riyadh): +966 11 448 4482

Polyurethane Oil Seals for High-Wear and High-Pressure Applications

• Where Used: Hydraulic rods, wipers and abrasive environments.
• Benefit: Excellent wear, abrasion and extrusion resistance.
• Limits: Around +80–100°C maximum and weak in hot water.
• Tip: PU is more common in hydraulic cylinder seals than in rotary oil seals; ask AFI Equipment for both.

Available From: AFI Equipment (Riyadh): +966 11 448 4482

Oil Seals for Industrial Motors and Electric Motors

• Common Choice: Double lip NBR or FKM seals, or V-rings, on motor end shields and bearing covers.
• High-Speed Motors: Use low-friction FKM or PTFE seals for 2-pole and high-speed motors.
• Dusty Plants: Add a V-ring outside the bearing cover to keep dust away from the seal.
• Gear Motors: Gearbox output shafts usually need double lip NBR or FKM seals.
• What to Check: Shaft size, RPM, motor frame size and IP rating.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

How to Measure an Oil Seal Before Replacement?

• Shaft: Measure the shaft with a vernier or micrometer where the lip runs; check for wear grooves.
• Bore: Measure the housing bore, not only the old seal OD, which may be distorted.
• Width: Measure the old seal width and the housing depth available.
• Markings: Read any size, brand or part number printed on the seal face.
• Lip Design: Note single or double lip, rubber or metal outside, and spring direction.
• Send to Supplier: Share photos and measurements, or bring the old seal, so the supplier can confirm the match.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369

Can KSA Suppliers Provide Oil Seals in Different Sizes and Profiles?

• Sizes: From small 10 mm shafts up to 200 mm+ heavy-duty and split seals.
• Profiles: TC, SC, TB, SB, TCV, VA and VS V-rings, cassette seals and PTFE lip designs.
• Standards: Metric DIN 3760 / ISO 6194, inch and JIS sizes.
• Custom: Bin Dayel offers custom oil seals for non-standard assemblies; OEM / ODM orders need a drawing and minimum quantity.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

What Causes Oil Seals to Leak?

• Shaft Wear: Grooves, scratches or rust on the shaft under the lip create a leak path.
• Wrong Fitting: A seal pushed in at an angle, a lip damaged on keyways or threads, or a seal fitted the wrong way round.
• Wrong Material: NBR running too hot hardens and cracks; wrong compound swells in synthetic oil.
• Pressure Build-Up: A blocked gearbox breather pressurises the housing and pushes oil past the lip.
• Contamination: Dust and sand wear the lip and shaft quickly.
• Shaft Run-Out or Misalignment: A bent shaft or worn bearings make the lip lose contact.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

How Can You Extend the Service Life of an Oil Seal?

• Fit Correctly: Use a fitting tool, lubricate the lip and cover keyways and threads.
• Repair the Shaft: Use a repair sleeve such as SKF Speedi-Sleeve on grooved shafts.
• Right Material: Use FKM for hot oil and PTFE for chemicals or high speed.
• Keep Breathers Clear: Prevent pressure build-up in gearboxes.
• Protect From Dust: Use double lip seals, dust lip seals or V-rings.
• Check Bearings: Replace worn bearings that cause shaft movement.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry

Can Contamination and Dust Cause Oil Seal Failure?

• Yes: Sand and dust are a leading cause of oil seal failure in Saudi Arabia.
• How It Happens: Particles get under the lip, wear it and score the shaft, opening a leak path.
• Warning Signs: Oil mixed with dust around the seal, a grooved shaft and short seal life.
• Solution: Use dust lip or double lip seals, V-rings or cassette seals, and clean the area before fitting.

Available From: Kyan Canon Trading Company (Riyadh): via FYIND enquiry  |  AFI Equipment (Riyadh): +966 11 448 4482

Where to Find Replacement Oil Seals in KSA?

• Industrial: AFI Equipment and Kyan Canon Trading in Riyadh.
• Marine and Custom: Bin Dayel Industrial and Marine Supplies in Riyadh.
• Automotive: Najem Al Remal on Al Jameya Road, Riyadh.
• Eastern Province: AFI Group in Dammam.
• Tip: Search FYIND by size or part number to find more stockists.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369

Are Oil Seals Available for Bulk Industrial Procurement?

• Yes: Industrial suppliers quote bulk quantities for plants, fleets and maintenance contracts.
• What to Send: A size list with brand, material, quantity and delivery schedule.
• Benefit: Better unit prices, planned delivery and less risk of stock-outs.
• Tip: Agree approved equivalents in advance so orders are not delayed.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606

How to Request an Oil Seal Quote From a KSA Supplier?

• Step 1: List size (shaft × bore × width), type and material.
• Step 2: Add brand or part number, quantity and delivery city.
• Step 3: Send the request through FYIND or call the supplier.
• Step 4: Compare price, brand, origin and delivery time.
• Step 5: Confirm the order in writing with the part numbers.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369

How Much Does an Oil Seal Cost in Saudi Arabia?

• Short Answer: Most standard NBR oil seals cost SAR 3–40; branded or FKM seals SAR 20–250; PTFE, cassette and split seals from SAR 150 to over SAR 2,500.
• What Affects the Price: Size, material (FKM and PTFE cost more than NBR), brand, design (cassette and split cost more) and quantity.

• How Much Does an Oil Seal Cost?: A typical car crankshaft seal costs SAR 10–150, an industrial gearbox seal SAR 5–150, and a large heavy-duty or FKM seal several hundred riyals.
• O Ring Oil Seals at Best Price: To get the best price on O-rings and oil seals, give exact sizes, accept an approved equivalent brand and order common sizes in quantity.
• Cheap vs Branded: On critical equipment, a branded seal usually costs less overall because it avoids repeat downtime.
• Note: Prices are indicative estimates; request a written quote from FYIND suppliers.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369

Oil Seal Suppliers in Riyadh, Jeddah, Dammam and Khobar

• Riyadh: AFI Equipment: +966 11 448 4482 • Bin Dayel: +966 55 597 4606 • Najem Al Remal: +966 55 475 6369 • Kyan Canon Trading: via FYIND.
• Dammam: AFI Group head office: +966 9200 13194 • AESSEAL Saudi Arabia Co Ltd: +966 13 802 4170.
• Oil Seal Suppliers in KSA Khobar: PPE Al Khobar: +966 59 640 0650 • EagleBurgmann Al Khobar service centre • a Najem Al Remal parts store in Ath Thuqbah.
• Jeddah: AFI service workshop in Jeddah; Riyadh suppliers deliver nationwide.
• Tip: Choose the nearest supplier for urgent seals and the best-stocked supplier for branded or large sizes.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369

Where to Buy Oil Seals for Industrial Applications in Saudi Arabia?

• Branded Industrial Seals: AFI Equipment, with SKF, Parker and Dichtomatic partner brands.
• PTFE and High-Temperature: Kyan Canon Trading.
• Marine and Custom: Bin Dayel Industrial and Marine Supplies.
• Automotive and Fleet: Najem Al Remal.
• Next Step: Request a quote through FYIND with size, material and quantity.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Kyan Canon Trading Company (Riyadh): via FYIND enquiry  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606

Can Oil Seal Suppliers in KSA Provide Nationwide Delivery?

• Yes: Most suppliers ship by courier or their own vehicles to all main cities.
• Branch Network: AFI has branches and workshops across the Kingdom, including Riyadh, Dammam, Jeddah, Jubail and Yanbu.
• Remote Sites: Ask about delivery to industrial cities and project sites.
• Tip: Confirm stock location and dispatch time for urgent orders.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606

How Quickly Can You Source Replacement Oil Seals in Saudi Arabia?

• Stocked Sizes: Same day to 2 days for common NBR industrial and automotive seals.
• Branded or FKM: A few days from local stock, or 1–3 weeks if imported.
• Custom and Split: Typically 2–6 weeks, depending on size and material.
• Speed It Up: Send exact sizes and part numbers and accept approved equivalents.

Available From: AFI Equipment (Riyadh): +966 11 448 4482  |  Najem Al Remal Auto Spare Parts (Riyadh): +966 55 475 6369  |  Bin Dayel Industrial and Marine Supplies (Riyadh): +966 55 597 4606

Frequently Asked Questions

People Also Ask

People Also Search For

Related Searches