Chain Wheel and Industrial Sprocket Suppliers in Saudi Arabia | Roller, Duplex & Heavy-Duty Sprockets for Industrial Applications
Chain wheels and industrial sprockets in Saudi Arabia are essential components in power transmission and material handling systems.
They are widely used in cement plants, petrochemical facilities, food processing units, agricultural machinery, conveyor systems, and manufacturing lines across Riyadh, Dammam, Jubail, Yanbu, and other industrial cities.
Chain sprockets transfer motion from motor to machine, ensuring synchronized movement in conveyors, crushers, mixers, packaging lines, and heavy-duty industrial drives.
Durable chain wheels not only maintain production efficiency but also reduce downtime and maintenance costs in demanding operating environments.
Industrial sprockets are among the most commonly replaced power transmission components in Saudi facilities.
Yet they are also among the most frequently mis-specified and prematurely worn parts.
In cement conveyors, bulk material handling systems, refinery transfer lines, and automated production equipment, sprocket failures rarely occur because of basic design.
They happen because buyers are not guided on chain standard (ANSI vs ISO), strand configuration (simplex, duplex, triplex), material grade, tooth hardening, bore tolerance, or environmental suitability.
Across the Saudi industrial market, experienced suppliers now treat chain wheels as engineered drive components not just toothed steel discs.
Top Chain Wheel and Industrial Sprocket Suppliers in Saudi Arabia
ALPS (Al-Majd for Industrial Supplies)
Location: Dammam, Eastern Province, Saudi Arabia
Supplies: roller chains and sprockets for manufacturing, agriculture, and material handling.
Local stock for the Eastern Province fastest supply for Dammam-based industrial customers.
Alruqee Industrial Marketing Company (RIM)
Location: P.O. Box 3657, Al Khobar 31952
+966 13 847 0664 | +966 13 857 7494
Multi-branch: Al Khobar, Dammam, Jubail, Riyadh, Jeddah, Yanbu, Ras Al Khair, Qassim, Hail, Tabuk, Jazan.
Aramco-registered vendor since 1976.
Supplies: industrial tools, power transmission products, chains, sprockets, and machinery components.
Asar Engineering Pvt. Ltd.
+91 77384 13474 (India, direct export to KSA)
Manufactures: simplex, duplex, triplex, quadplex, conveyor, and idler sprockets.
Materials: alloy steel, C45, pre-hardened steel, SS304, SS316.
Sizes: 15mm to 2,000mm diameter | Pitch: ¼" to 5".
Full export documentation and ISO compliance.
Exports to Riyadh, Jeddah, Dammam ports.
Durable Chain and Sprockets Supplier in Dammam
For Dammam and the Eastern Province, the two strongest options are:
ALPS, Dammam
Local stock.
Fastest supply in Eastern Province.
Chains and sprockets for manufacturing, agriculture, and material handling systems.
Built for heavy loads and high-speed operations - conveyors, machinery, and automation.
Alruqee Industrial Marketing — Al Khobar
+966 13 847 0664
Aramco-registered vendor.
Covers Dammam, Jubail, and wider Eastern Province.
Stock of international brand power transmission products including chains and sprockets.
For urgent breakdown requirements in Dammam:
ALPS is the fastest local source for standard sizes.
Alruqee (+966 13 847 0664) handles Aramco-project procurement with full documentation.
Chain Sprocket Manufacturer in Saudi Arabia
There are no chain sprocket manufacturers in Saudi Arabia.
All sprockets and chain wheels in the Kingdom are manufactured internationally and imported.
Primary manufacturing sources supplying Saudi Arabia:
- India (Asar Engineering, B V Transmission, Rajendra Pulley — volume manufacturing with KSA export)
- Japan (Tsubaki, Daido — premium precision products)
- Germany (Renold, Iwis — European-spec products for European-origin machinery)
- China (Donghua, CTS Transmission — ISO 606 compliant, competitive pricing)
Quality and authenticity depend entirely on your local distributor or direct exporter.
Always ask: ISO certification number, material grade certificate, and brand documentation.
Industrial Chain Sprocket Manufacturers in KSA
Because no local manufacturer exists, "industrial chain sprocket manufacturers in KSA" means:
Either a local distributor holding stock, or an international manufacturer exporting to KSA.
Local distributors with stock:
ALPS (Dammam) — standard sizes for Eastern Province customers.
Alruqee Industrial Marketing (+966 13 847 0664) — multi-city KSA, Aramco-approved vendor.
International manufacturers exporting to KSA:
Asar Engineering — +91 77384 13474 | full custom range, all materials.
B V Transmission Industries — India | complete transmission packages.
Infinity Engineering Solutions — India | conveyor sprocket systems.
For Aramco or SABIC projects requiring registered vendor supply:
Alruqee (+966 13 847 0664) holds active Aramco vendor registration - essential for procurement compliance on oil and gas projects.
Roller Chain Sprockets Manufacturer in Saudi Arabia
"Roller chain sprocket" and "chain wheel" mean the same product - a toothed wheel that engages with roller chain to transmit power.
No manufacturer in Saudi Arabia makes them locally.
All roller chain sprockets are imported.
For KSA supply:
For immediate stock (Dammam and Eastern Province):
ALPS Dammam | Alruqee Al Khobar — +966 13 847 0664
For import of full range from factory:
Asar Engineering — +91 77384 13474
Covers all ANSI and ISO metric chain sizes from #25 to #240 ANSI and 04B to 32B ISO.
Simplex through quadplex.
C45 carbon steel, alloy steel, SS304, SS316.
Clarkson Chain Wheels Supplier in Saudi Arabia
Clarkson chain wheels are a specific product type - not industrial drive sprockets.
A Clarkson chain wheel (also called a handwheel chain operator) is used to operate industrial valves remotely via a length of hanging steel chain.
When a valve handwheel is mounted high on a pipe or equipment at an inaccessible height, a Clarkson-type chain wheel fits onto the handwheel spindle and allows an operator to turn the valve from floor level using a hanging chain loop.
They are used in:
- Water treatment plants (valve stations with elevated handwheels)
- Industrial pipelines
- Petrochemical and chemical facilities in Saudi Arabia
- HVAC and building services valve installations
Material: Typically cast iron, ductile iron, or carbon steel.
Some stainless steel versions for chemical resistance.
Who supplies Clarkson-type chain wheel operators in Saudi Arabia:
Alruqee Industrial Marketing (+966 13 847 0664, Al Khobar) — industrial pipeline and valve accessories.
Industrial valve and pipeline suppliers serving SWCC and Aramco projects typically carry chain wheel operators as standard catalog items alongside valve handwheels.
For chain wheel valve operators: specify valve handwheel diameter, spindle diameter, chain type (roller or special chain), and required reach (length of chain drop from the wheel to floor level).
Chain Wheel Dealers and Distributors in Saudi Arabia
Eastern Province and Jubail:
Alruqee Industrial Marketing — +966 13 847 0664 | Al Khobar
ALPS — Dammam (chain and sprocket stock)
Riyadh and Central Region:
Alruqee Industrial Marketing — Riyadh branch (part of multi-city network)
Jeddah and Western Region:
Alruqee Industrial Marketing — Jeddah branch
Yanbu:
Alruqee Industrial Marketing — Yanbu branch
For special sizes and import direct from manufacturer:
Asar Engineering — +91 77384 13474 (India)
B V Transmission Industries — India
Chain Sprocket Wheel Suppliers in Saudi Arabia
Chain sprocket wheel = chain wheel = roller chain sprocket.
All refer to the same toothed-wheel product.
Terminology varies by industry and region.
In-Kingdom suppliers:
ALPS Dammam — stock of standard chain sprocket wheels for Eastern Province customers.
Alruqee Industrial Marketing — +966 13 847 0664 — multi-city coverage, Aramco-registered.
Import suppliers serving KSA:
Asar Engineering — +91 77384 13474 — full range, all configurations.
B V Transmission Industries — India — matched chain and sprocket packages.
Rajendra Pulley Pedestal Center — India — idler and split type chain wheels.
Roller Chain Sprocket Suppliers KSA
Dammam: ALPS | Alruqee (+966 13 847 0664)
Al Khobar: Alruqee — +966 13 847 0664 | P.O. Box 3657
Jubail: Alruqee — Jubail branch
Riyadh: Alruqee — Riyadh branch
Jeddah: Alruqee — Jeddah branch
Yanbu: Alruqee — Yanbu branch
Import direct: Asar Engineering — +91 77384 13474
For non-standard sizes not held in local KSA stock — contact Asar Engineering for factory export.
Sea freight to Dammam: 12–18 days.
Industrial Chain Wheels for Heavy Machinery Saudi Arabia
Heavy machinery in Saudi Arabia crushing and screening plants, large conveyors, cement mills, mining equipment uses heavy-duty chain wheels with specific requirements:
What defines a heavy machinery chain wheel:
- ANSI #80 to #240 chain sizes (or ISO 16B to 48B metric equivalents)
- C45 steel with induction-hardened teeth — minimum HRC 40–50 on tooth flanks
- Bore diameters from 50mm to 200mm+
- Hub type: C (hub both sides) or taper-lock bushing for secure heavy shaft mounting
- Duplex or triplex configuration for load spreading across multiple chain strands
Who supplies heavy machinery chain wheels to Saudi Arabia:
Asar Engineering (+91 77384 13474) — manufactures heavy-duty chain wheels up to 2,000mm diameter with pre-hardened steel options.
Alruqee (+966 13 847 0664) — handles procurement for Aramco and industrial clients requiring heavy-duty power transmission components.
For very large chain wheels (above 500mm diameter):
Custom manufacturing is required.
Contact Asar Engineering with your drawing — lead time 3–6 weeks from approval.
Stainless Steel Chain Sprockets Supplier KSA
Stainless steel chain sprockets are required in:
- Food and beverage processing facilities
- Pharmaceutical manufacturing regulated by SFDA
- Marine and coastal installations
- Chemical plants with splash or fume exposure
- Wet conveyor lines and washdown environments
SS304 — for general wet and mildly corrosive environments.
SS316 — for food contact, high-chloride, and aggressive chemical environments.
Who supplies SS chain sprockets to Saudi Arabia:
Asar Engineering (+91 77384 13474) — SS304 and SS316 sprockets in simplex, duplex, and triplex configurations.
Custom bore and keyway machining included.
Full material test certificates available.
For food-processing applications in Saudi Arabia regulated by SFDA:
Specify SS316 as a minimum and request MTC confirming grade.
Confirm surface finish (smooth or polished) meets your hygiene standard requirements.
Duplex and Simplex Chain Wheel Types in Saudi Arabia
Simplex (single strand) chain wheel:
One row of teeth.
Engages single strand roller chain.
The most common and widely stocked type in Saudi Arabia.
Available from ALPS Dammam and Alruqee (+966 13 847 0664) in standard sizes.
Use for: light to medium duty drives.
Duplex (double strand) chain wheel:
Two rows of teeth.
Engages double strand (duplex) roller chain.
Carries approximately double the load of equivalent simplex.
Use for: medium-heavy industrial drives, agricultural equipment, packaging lines.
Available from Asar Engineering (+91 77384 13474) in full range.
Triplex (triple strand) chain wheel:
Three rows of teeth.
Maximum load capacity for roller chain drives.
Use for: heavy conveyors, mining equipment, cement plant drives.
Available from Asar Engineering (+91 77384 13474) — standard and custom sizes.
Heavy Duty Chain Sprockets for Conveyor Systems KSA
Heavy duty conveyor sprockets in Saudi Arabia are used in:
- Aggregate and bulk mineral handling conveyors
- Cement plant raw material and clinker conveyors
- Food processing and packaging conveyor lines
- Automated warehouse logistics systems
- Mining ore transfer conveyors
Critical specifications for conveyor sprocket selection in KSA:
Chain pitch: typically 1", 1.25", 1.5", or 2" for heavy industrial conveyors.
Tooth hardness: minimum HRC 40–50 on induction-hardened tooth faces.
Hub type: C-type (hub both sides) or taper-lock for heavy shaft support.
Material: C45 steel with heat treatment for standard industrial.
SS316 for food conveyors.
Tooth profile: must be optimized for the specific chain series (conveyor chains have different tooth profiles than standard roller chain sprockets).
Custom Chain Sprocket Wheel Manufacturers Saudi Arabia
Custom chain sprocket wheels are needed when:
- Standard catalog bore sizes do not match your shaft
- Non-standard tooth count is required for your drive ratio
- Special materials (SS316, engineering plastics, pre-hardened alloy steel) are specified
- Hub dimensions are non-standard (unusual hub length, offset bore)
- OEM or replacement sprocket with no current catalog equivalent exists
Who makes custom chain sprocket wheels for Saudi Arabia:
Asar Engineering — +91 77384 13474
Full custom service: bore size, keyway dimensions, hub type (A/B/C/D), hub extension, number of teeth, pitch, material, and surface treatment.
Diameter range: 15mm to 2,000mm.
Lead time: 2–4 weeks from approved drawing.
B V Transmission Industries — India
Custom sprockets across their full product range — provide drawing or OEM part number.
For custom quotation, provide:
Chain pitch | number of teeth | bore diameter | keyway size (width × depth) | hub type and length | outside diameter | material | strand count | quantity required.
Chain Wheel Types and Price in Saudi Arabia
Types:
Simplex — single strand engagement | standard industrial use
Duplex — double strand | medium-heavy loads
Triplex / Quadplex — triple or quad strand | heavy industrial and mining
Idler — freely rotating, no keyway | for chain tensioning and path redirection
Split — two-bolt halves | for installation without shaft disassembly
Taper-lock / QD bushing — for fast mounting and removal on industrial shafts
Conveyor — heavy tooth profile for continuous-duty conveyor chain
Price guide (per piece, mild steel, imported to Saudi Arabia):
Small simplex (#25–#40 chain, up to 25 teeth): SAR 30 – 150
Medium simplex (#50–#60 chain, 20–40 teeth): SAR 100 – 400
Large simplex (#80–#120 chain): SAR 300 – 1,200+
Duplex equivalent: add 30–50% over simplex same size
Triplex equivalent: add 60–100% over simplex same size
Stainless steel (any type): 2–4× the equivalent MS price
Conveyor sprocket (large diameter): SAR 500 – 5,000+ depending on size and material
Customs duty and freight from India to Saudi Arabia: add 10–15% of machine value.
Bulk Chain Wheel Suppliers in Dammam
ALPS, Dammam
Handles bulk chain and sprocket supply for manufacturing, agriculture, and material handling customers in the Eastern Province.
Local stock enables fast dispatch without import lead time.
Alruqee Industrial Marketing
+966 13 847 0664 | Al Khobar
Aramco-registered vendor.
Handles large-volume industrial supply across Eastern Province facilities.
Multi-branch dispatch capability for phased delivery to match plant shutdown schedules.
Asar Engineering — +91 77384 13474
Factory pricing on bulk orders of 50+ units.
Full export documentation, ISO compliance, and material certificates.
Sea freight to Dammam: 12–18 days from dispatch.
For bulk orders:
- Submit full BOM: chain section + teeth count + bore + material for every sprocket
- Request annual contract pricing — not unit pricing
- Confirm manufacturing batch matching for sprockets used in multi-drive systems
- Align delivery timing with your plant maintenance schedule
Chain Sprocket Quotation Saudi Arabia
To get an accurate chain sprocket quotation for a Saudi project:
Information to prepare before calling:
Chain standard: ANSI (American) or ISO metric (British/European)?
Chain section number: #25, #35, #40, #50, #60, #80, #100, #120 (ANSI) or 04B, 06B, 08B, 10B, 12B, 16B, 20B, 24B (ISO)?
Number of teeth
Bore diameter (mm)
Keyway size (width × depth in mm) or key size code
Hub type: A-plate, B-hub one side, C-hub both sides, or taper-lock / QD bushing?
Hub length (if B or C type)
Material: MS, C45, EN8, SS304, SS316, or other?
Strand count: simplex, duplex, triplex?
Quantity required
Required delivery location in Saudi Arabia (Dammam, Jeddah, Riyadh)
Who to contact:
ALPS Dammam — for local Eastern Province quotation
Alruqee Al Khobar — +966 13 847 0664 — for Aramco-project or multi-city KSA supply
Asar Engineering — +91 77384 13474 — for factory direct pricing on bulk or custom
Top Brands of Chain Wheels Available in Saudi Arabia
Tsubaki (Japan)
One of the world's largest roller chain and sprocket manufacturers.
ISO and ANSI compliant.
Used in automotive, food processing, and heavy industry.
Available in Saudi Arabia through select industrial importers.
Renold (UK / Germany)
Globally recognized for precision chains and sprockets.
Standard specification for European-origin conveyor and industrial machinery in KSA.
Martin Sprocket & Gear (USA)
Large ANSI-specification sprocket range.
Common in US-origin plant and equipment operating in Saudi Arabia's oil and gas sector.
Daido (Japan)
High-quality chains and sprockets for industrial and automotive applications.
Donghua / Hengjiu (China)
ISO 606 compliant metric sprockets.
Competitive pricing.
Widely stocked by general industrial suppliers including ALPS.
Asar Engineering (India)
Factory-direct pricing with full export to KSA.
Complete range from simplex to quadplex in carbon steel and stainless steel.
For Aramco-specified OEM equipment: brand may be stipulated in the equipment documentation.
Confirm the OEM-specified brand before ordering a replacement.
Alruqee (+966 13 847 0664) handles brand-specific procurement for Aramco projects.
Branded Roller Chain Sprocket Suppliers in KSA
For Tsubaki and Japanese branded sprockets:
Alruqee Industrial Marketing (+966 13 847 0664) — Aramco-registered industrial distributor, carries Japanese and European transmission brands.
For Indian-manufactured branded sprockets (Asar, BV Transmission):
Asar Engineering (+91 77384 13474) — factory direct, ISO certified, full documentation for KSA projects.
For Chinese ISO-compliant branded sprockets (Donghua, Hengjiu):
ALPS Dammam — general industrial stock.
Always request:
- Brand name stamped or marked on the sprocket
- Material grade documentation
- ISO certification number
- Pitch tolerance compliance declaration for precision conveyor applications
Industrial Chain Wheel Sizes and Specifications Saudi Arabia
ANSI standard chain wheel sizes (most common in Saudi Arabia):
| Chain No. |
Pitch |
Common Use |
| #25 | 6.35mm (¼") | Light machinery, small equipment |
| #35 | 9.525mm (3/8") | Light industrial, agricultural |
| #40 | 12.7mm (½") | General industrial — most common |
| #50 | 15.875mm (⅝") | Medium industrial drives |
| #60 | 19.05mm (¾") | Medium-heavy industrial |
| #80 | 25.4mm (1") | Heavy industrial drives |
| #100 | 31.75mm (1¼") | Heavy industrial |
| #120 | 38.1mm (1½") | Very heavy industrial |
| #160 | 50.8mm (2") | Mining, cement, bulk handling |
| #240 | 76.2mm (3") | Maximum heavy industrial |
Standard tooth counts available: 9T through 120T and above (custom).
Standard hub bore range: 12mm to 200mm (standard catalog).
Above 200mm: specify custom.
Top Chain Wheel and Sprocket Suppliers in Saudi Arabia
| Supplier |
Location |
Contact |
Best For |
| ALPS |
Dammam, Eastern Province |
Via inquiry |
Local stock, fast dispatch, Eastern Province |
| Alruqee Industrial Marketing |
Al Khobar (multi-city KSA) |
+966 13 847 0664 |
Aramco-registered, nationwide coverage, branded supply |
| Asar Engineering |
India — exports to KSA |
+91 77384 13474 |
Full range, custom sizes, SS options, 15mm–2,000mm |
| B V Transmission Industries |
India — exports to KSA |
Via inquiry |
Complete power transmission packages |
| Infinity Engineering Solutions |
India — exports to KSA |
Via inquiry |
Conveyor chain and sprocket systems |
| Rajendra Pulley Pedestal Center |
India — exports to KSA |
Via inquiry |
Idler and split sprocket types |
Things to Know Before You Buy Chain Wheels in Saudi Arabia
ANSI and ISO metric are NOT interchangeable.
ANSI #40 and ISO 08B both have 12.7mm pitch but different roller diameter and plate dimensions.
Using an ANSI sprocket with ISO chain (or vice versa) causes immediate wear.
Identify your chain standard before ordering any replacement sprocket.
Always replace chain and sprocket at the same time.
The single most common cause of premature sprocket failure in Saudi industrial facilities.
New sprocket on stretched old chain = rapid tooth wear.
Old worn sprocket on new chain = chain jumps off or wears in days.
Confirm bore and keyway before ordering.
A sprocket that doesn't fit the shaft is useless.
Measure the shaft diameter with a micrometer — not a ruler.
Give bore diameter and full keyway dimensions (width × depth) in your order.
For SS sprockets to Saudi Arabia: always request MTC.
SS304 and SS316 are visually identical.
Grade cannot be confirmed visually.
Only a material test certificate (MTC) from the manufacturer confirms the grade.
In food-processing or pharmaceutical applications: non-compliance is an SFDA regulatory risk.
Plan import lead times for non-stock items.
Sea freight from India to Dammam or Jeddah: 12–18 days after dispatch.
Custom manufactured sprockets: add 2–4 weeks manufacturing time before shipping.
For critical drives: always keep one spare sprocket on site rather than ordering after failure.
0 
