Roller Bearing Suppliers in KSA | Cylindrical, Tapered, Spherical & Needle Bearings

Roller Bearing Suppliers in KSA | Industrial Roller Bearing Suppliers in Saudi Arabia

Find roller bearing suppliers in Saudi Arabia for cylindrical, spherical, tapered, needle and thrust roller bearings, along with deep groove, angular contact and four-point contact ball bearings. Compare suppliers in Riyadh, Dammam, Al Khobar, Jubail and Jeddah stocking SKF, FAG, Timken, NSK, NTN and Koyo for pumps, compressors, gearboxes, conveyors, heavy equipment and rotating machinery. Check bearing types, specifications, price ranges, supplier contact numbers and delivery options before you request a quote.

How to select the right roller bearing size and type for your application?

Before Choosing a Roller Bearing

✓ Bearing Type: Cylindrical, Spherical, Tapered, Needle, Thrust Roller or Four-Point Contact — pick the type that matches how the load acts on the shaft, not the one that happens to be in stock.

✓ Bore Diameter: The inner diameter must fit your shaft with the correct fit. Read it from the bearing code, or measure in millimetres with a caliper or micrometer, not a tape.

✓ Outside Diameter & Width: The outside diameter must match the housing bore, and the width must fit the space between shoulders. A bearing that is a few millimetres off will not seat properly.

✓ Radial & Axial Load: Radial load acts across the shaft; axial load acts along it. NU-type cylindrical bearings carry no axial load, while tapered, spherical and thrust bearings do.

✓ Dynamic & Static Load Rating: The dynamic rating (C) sets the fatigue life of a rotating bearing. The static rating (C0) matters for slow-turning, oscillating or shock-loaded equipment. Check both in the maker's catalogue.

✓ Operating Speed: Stay within the catalogue speed ratings. Lubrication method and cage type both affect how fast a bearing can run without overheating.

✓ Operating Temperature: Heat changes fits and internal clearance and shortens grease life. Kilns, furnaces and outdoor equipment in the Saudi summer often need heat-stabilised bearings and a lubricant rated for the temperature.

✓ Clearance: Internal clearance comes in classes such as C2, CN (normal), C3 and C4. C3 is common in electric motors and hot-running equipment.

✓ Lubrication & Sealing: Confirm grease or oil, the relubrication interval, and seals that keep out sand, dust and water — contamination is one of the most common reasons bearings fail early.

✓ Alignment: If the shaft deflects or the housings cannot be aligned accurately, use a spherical roller bearing instead of a rigid type.

✓ Applications: Pumps, Compressors, Gearboxes, Electric Motors, Conveyors, Crushers, Construction Equipment, Forklifts, Fans and Blowers.

✓ Buyer's Tip: Send the supplier the full bearing code including suffixes, such as NU314 ECJ/C3. The same base number with a different suffix can mean a different cage, clearance or internal design.

Match Your Machine to the Right Roller Bearing

What Is a Roller Bearing, and How Is It Different From a Ball Bearing?

A roller bearing uses cylinders, barrels, cones or needles as its rolling elements instead of balls. Rollers touch the raceway along a line, while balls touch at a single point, so a roller bearing carries more load than a ball bearing of the same size. Ball bearings are the usual pick for lighter loads and higher speeds.

When Should You Use a Roller Bearing Instead of a Ball Bearing?

Go for a roller bearing when the load is heavy, when the machine sees shock loads, or when a small bearing has to carry a big load. Go for a ball bearing when speed and low friction count for more than load capacity. Plenty of machines use both: a roller bearing where the load is heaviest and a ball bearing to hold the shaft in position axially.

Which Roller Bearing Type Do You Actually Need?

Roller bearings are built for specific loads and conditions, so one type cannot simply replace another. Match your machine to the closest profile:

• Cylindrical Roller Bearing: high radial load at relatively high speed, where the shaft and housing are accurately aligned. NU and N designs let the shaft expand as it heats up.
• Spherical Roller Bearing: heavy radial load plus some axial load in both directions, and it tolerates shaft deflection and misalignment.
• Tapered Roller Bearing: combined radial and axial load. A single-row bearing takes axial load in one direction only, so they are usually fitted in pairs.
• Needle Roller Bearing: long, thin rollers that give high radial capacity in a very small cross-section.
• Thrust Roller Bearing: built mainly for load along the shaft axis, such as in vertical pumps and extruders.
• Four-Point Contact Bearing: a ball bearing that locates the shaft and takes axial load in both directions, often paired with a cylindrical roller bearing in gearboxes.

What are the different roller bearing types and which applications are they used for?

Most bearing suppliers in KSA stock both roller and ball bearings, so one quotation can usually cover every bearing in a machine.

How to Choose the Right Roller Bearing for Your Application in KSA

The right roller bearing comes down to four things: the load it carries, the shaft and housing it has to fit, the speed and temperature it runs at, and the conditions around it. Before you order, check each requirement below against your machine.

Saudi Site Conditions to Mention When You Ask for a Quote

Local conditions change the bearing you need. High summer temperatures affect grease choice and internal clearance. Fine sand and dust call for good seals and clean greasing practice. Plants on the coast in Jeddah, Dammam and Jubail deal with humidity and salt, so corrosion protection and proper storage matter. Tell your supplier about these when you send your enquiry.

How to Select the Right Roller Bearing Size and Dimensions

The quickest way to size a replacement is to read the code stamped on the old bearing's ring. If the marking has worn off, measure three dimensions in millimetres and send them to your supplier with the bearing type:

• Bore Diameter (d): the inside diameter that fits on the shaft.
• Outside Diameter (D): the outer diameter that fits into the housing.
• Width (B, or T for tapered bearings): the thickness of the bearing along the shaft.

Use a calibrated caliper or micrometer rather than a tape. A worn shaft or housing can throw off your readings, so check those as well. Most metric bearings follow standard ISO boundary dimensions, which is why suppliers can match one brand to another. For an example of how to read a full bearing code, see NU314 ECJ/C3 below.

What are the common roller bearing sizes and dimensions available in Saudi Arabia?

Bearings with the same basic number share the same boundary dimensions across brands, which is how suppliers cross-reference SKF, FAG, NSK, NTN and Timken. These are some of the most requested sizes in KSA:

Suffixes such as C3, E, EC, J, M or 2RS change the internal design, cage, clearance or sealing, not the boundary dimensions. Always confirm sizes and load ratings in the manufacturer's catalogue before ordering.

Where to find roller bearing suppliers in Saudi Arabia

Suppliers across Riyadh, the Eastern Province and Jeddah stock these bearings in economy, mid-range and OEM brands. Each section covers what the bearing is built for, where it is used and where to ask for it.

Tapered Roller Bearing Suppliers in Saudi Arabia for Automotive and Heavy-Duty Applications

• Load: Radial and axial load together | Design: The cone and cup come apart, which makes fitting and inspection easier.
• Where They Are Used: Wheel hubs, differentials and gearboxes in cars, trucks and buses, plus final drives in construction and agricultural machinery.
• Fitting: Single-row bearings take axial load in one direction, so they are usually fitted in pairs with clearance or preload set during assembly. Double-row bearings take axial load both ways.
• Price Range: Single row (30000 series) SAR 25–500 economy  |  SAR 80–1,200 mid-range  |  SAR 150–3,000 OEM brand  |  Double row SAR 100–1,500 economy / SAR 350–6,000+ OEM.

Available From: Zahid Tractor - Industrial Division — +966 11 479 0000  |  Arabian Bearing Company — +966 11 477 3300

Automotive Roller Bearing Suppliers in Saudi Arabia for Cars and Commercial Vehicles

• Types: Tapered roller bearings for wheel hubs and differentials; needle roller bearings for gearboxes, transmissions and steering parts.
• Vehicles: Passenger cars, pickups, vans, trucks, buses and trailers.
• Ordering: Quote the vehicle maker's part number or the code stamped on the old bearing. Wheel bearings often come as matched cone-and-cup sets, so order both parts together.
• Suited to fleet operators, truck and bus workshops and spare parts dealers.

Available From: Bearing World — +966 11 462 5500  |  Zahid Tractor - Industrial Division — +966 11 479 0000

SKF Roller Bearing Distributors in Saudi Arabia for Industrial and Automotive Applications

• Range: SKF cylindrical, spherical, tapered, needle and thrust roller bearings, plus ball bearings, housings and seals for plant machinery and vehicles.
• Why Buy From an Authorized Source: Genuine stock, mill test certificates (MTC) and support with Aramco 9COM material codes on project orders.
• Check Before You Buy: Confirm a distributor's status through SKF's official distributor locator, and use the SKF Authenticate app on any bearing you are unsure about. Schaeffler (FAG, INA), Timken, NSK and NTN each run their own authorized networks too.

Available From: SKF Saudi Arabia Inc. — +966 13 847 0000

Four-Point Contact Bearing Suppliers in KSA for Rotating Equipment

• Type: Four-point contact ball bearing (QJ series in many catalogues) | Load: Axial load in both directions with limited radial load.
• Common Setup: Paired with a cylindrical roller bearing that takes the radial load while the four-point bearing holds the shaft in position — a frequent layout in gearboxes, compressors and slewing equipment.
• Send the full code, or the bore, outside diameter and width, so the supplier can match it across brands.

Available From: Al Wasat Al Badeel Trading Company — +966 13 834 2200  |  Bearing World — +966 11 462 5500

Forklift Mast Roller Bearings for Material Handling Equipment in KSA

• Design: A thick outer ring that runs directly on the mast channel, built for heavy and shock loads. Combined roller versions add a side roller to take sideways thrust.
• Equipment: Forklifts, reach trucks, stackers and other lifting equipment in warehouses, ports and logistics yards.
• Ordering: Quote the forklift maker's part number, or send the bore, outside diameter and width.

Available From: Al Wasat Al Badeel Trading Company — +966 13 834 2200

Which roller bearings are suitable for different industrial applications in Saudi Arabia?

For maintenance teams, OEMs and procurement departments replacing bearings in plant machinery, heavy equipment and rotating equipment across the Kingdom.

Roller Bearings for Pumps, Compressors and Gearboxes in Saudi Arabia

• Pumps & Compressors: Cylindrical roller bearings usually carry the radial load at the drive end, with angular contact ball bearings taking the axial thrust.
• Gearboxes: Cylindrical, tapered and spherical roller bearings, often alongside four-point contact bearings that hold the shaft in position.
• Give the supplier the pump or gearbox model and the bearing position so they can confirm the exact code and clearance.

Available From: Universal Bearing Est. — +966 11 463 1700

Heavy-Duty Roller Bearings for Industrial Machinery in KSA

• Types: Spherical and large-bore cylindrical roller bearings for crushers, mills, kilns, conveyors and vibrating screens.
• Selection: Check the static load rating for shock-loaded equipment, and choose C3 or C4 clearance where the bearing runs hot.
• Suited to cement, mining, steel, petrochemical and water plants where one failed bearing can stop a whole line.

Available From: Al-Rushaid Group — +966 13 341 0000  |  Al Babtain Industrial Group — +966 11 404 0000

OEM Roller Bearings for Heavy Equipment and Construction Machinery in KSA

• Equipment: Excavators, wheel loaders, cranes, graders, dozers and agricultural machinery.
• Why OEM Matters: Equipment makers name a brand and code for each bearing position. Sticking to it protects your warranty and keeps load ratings and clearance consistent.
• Tapered and spherical roller bearings are the most common types in wheel ends, final drives and swing gear.

Available From: Zahid Tractor - Industrial Division — +966 11 479 0000  |  Mohamed Abdulrahman Al-Bahar - Industrial Division — +966 13 832 0000

Precision Roller Bearings for High-Speed Rotating Equipment in Saudi Arabia

• Grades: P6 and P5 precision classes and matched tapered sets, for tighter running accuracy than standard P0 bearings.
• Typical Use: Machine tool spindles, high-speed pumps, compressors and test rigs.
• Speed: Check the catalogue speed ratings; lubrication, cage type and cooling all affect how fast a bearing can safely run.
• Price Range: Precision P5/P6 cylindrical roller bearings SAR 350–8,000+ (OEM brand).

Available From: Arabian Bearing Company — +966 11 477 3300

Spherical Roller Bearings for Misalignment and Heavy-Load Applications

• Load: Heavy radial load plus moderate axial load in both directions | Design: Two rows of barrel-shaped rollers and a curved outer raceway.
• Why It Works: The inner ring, rollers and cage can tilt inside the outer ring, so shaft bending and housing misalignment don't overload the rollers.
• Typical Use: Conveyors, crushers, vibrating screens, fans and paper and cement plant machinery.
• Price Range: 22200 series SAR 60–800 economy / SAR 180–3,500 OEM  |  22300 / 23000 series SAR 100–2,000 economy / SAR 300–12,000+ OEM  |  24000 large bore SAR 1,500–35,000+ OEM.

Available From: Mohamed Abdulrahman Al-Bahar - Industrial Division — +966 13 832 0000  |  Al-Rushaid Group — +966 13 341 0000

Cylindrical Roller Bearings and Ball Bearings in KSA

Most bearing suppliers in Saudi Arabia stock cylindrical roller bearings together with the main ball bearing types, so one quote can cover every bearing position in a machine.

Cylindrical Roller Bearings for Motors, Gearboxes and Industrial Machinery

• Load: High radial load at relatively high speed | Designs: NU and N allow the shaft to move axially as it heats up; NJ and NUP take limited axial load.
• Typical Use: Electric motors, gearboxes, pumps, compressors and rolling mills. Needs accurate shaft alignment.
• Price Range: NU/NJ standard SAR 40–600 economy  |  SAR 120–1,800 mid-range (NSK, NTN)  |  SAR 200–4,000 OEM (SKF, FAG).

Available From: Universal Bearing Est. — +966 11 463 1700  |  Arabian Bearing Company — +966 11 477 3300

Deep Groove Ball Bearings for Motors, Pumps and General Industrial Applications

• Load: Radial load with light axial load in both directions | Speed: Suited to high speeds with low friction.
• Options: Open, shielded or sealed versions; sealed bearings come greased for life and keep out dust.
• Typical Use: Electric motors, pumps, fans, conveyor idlers and general machinery — the most widely used bearing type.

Available From: Bearing World — +966 11 462 5500  |  All Brand Bearings — +966 11 498 3300

Angular Contact Ball Bearings for High-Speed and Combined-Load Applications

• Load: Radial and axial load together; a single bearing takes axial load in one direction only.
• Fitting: Often mounted in matched pairs (back-to-back, face-to-face or tandem) to carry axial load both ways or add stiffness.
• Typical Use: Centrifugal pumps, compressors, machine tool spindles and gearboxes.

Available From: Arabian Bearing Company — +966 11 477 3300  |  Universal Bearing Est. — +966 11 463 1700

Self-Aligning Ball Bearings for Applications With Shaft Misalignment

• Design: Two rows of balls running in a curved outer raceway, so the bearing tolerates shaft misalignment and bending.
• Load: Light to moderate radial loads; for heavy loads with misalignment, use a spherical roller bearing instead.
• Typical Use: Fans, agricultural machinery, textile machines and long, flexible shafts.

Available From: Bearing World — +966 11 462 5500  |  All Brand Bearings — +966 11 498 3300

Needle Roller Bearings

• Load: Radial load where there is very little space | Series: HK drawn cup and NA types with inner ring.
• Typical Use: Gearboxes, compressors, hydraulic pumps and automotive transmissions.
• Price Range: HK/NA series SAR 8–300 economy  |  SAR 25–1,200 OEM brand (INA, SKF).

Available From: Bearing World — +966 11 462 5500

NU314 ECJ/C3 SKF Cylindrical Roller Bearing for Industrial Machinery and Rotating Equipment

NU314 ECJ/C3 is one of the most requested cylindrical roller bearings for electric motors, pumps and gearboxes. Each part of the code tells you something about the bearing:

Confirm the outside diameter, width and load ratings in the SKF catalogue. Other brands use similar but not identical suffixes, so ask your supplier to check any cross-reference before you order.

Available From: SKF Saudi Arabia Inc. — +966 13 847 0000

Roller Bearings for Heavy Loads, High Speeds and High Temperatures

Which Roller Bearing Is Suitable for Heavy Load Applications?

Spherical and cylindrical roller bearings are the standard choice for high radial loads, though the final pick depends on load direction, shaft alignment, speed and site conditions. Tapered roller bearings handle radial and axial loads together. For heavy machinery where the shaft may bend or sit out of line, spherical roller bearings are the usual answer.

What Is the Difference Between Dynamic and Static Load Ratings?

• Dynamic Load Rating (C): used to work out the fatigue life of a bearing that turns under load, as set out in ISO 281.
• Static Load Rating (C0): the load a bearing can take while standing still or turning very slowly without permanently denting the raceways, as set out in ISO 76.

For rotating machines, the dynamic rating drives the life calculation. For slow-moving, oscillating or shock-loaded equipment, the static rating matters just as much. You will find both values in the maker's catalogue for every bearing code.

Which Roller Bearings Are Suitable for High-Speed Machinery?

Among roller types, cylindrical roller bearings handle speed best, and P6 or P5 precision grades are used where running accuracy is important. At very high speeds with light loads, a ball bearing is often the better fit. Always check the catalogue speed ratings — lubrication, cage type and cooling all change how fast a bearing can safely run.

Which Roller Bearing Is Suitable for High-Temperature and Harsh Environments?

For hot running conditions, look for heat-stabilised bearings, a larger internal clearance such as C3 or C4, and a grease or oil rated for the temperature. In dusty, sandy or wet sites, sealing matters as much as bearing type, whether that means sealed bearings or seals in the housing. Check the temperature limits of the cage and seals too, not only the steel. Your supplier or the manufacturer's engineers can confirm the right setup for kilns, furnaces, desert conveyors and coastal plants.

Where to find roller bearing suppliers in KSA for industrial applications?

Roller Bearing Suppliers Near Riyadh

Where to find roller bearing suppliers and distributors in Khobar, Saudi Arabia?

Roller Bearing Suppliers Near Al Khobar and Eastern Province

Which Roller Bearing Brands Are Available From Suppliers in KSA?

Bearing suppliers in Saudi Arabia mainly stock the big global names: SKF (Sweden), Schaeffler with its FAG and INA brands (Germany), Timken (USA), and NSK, NTN, Koyo and Nachi (Japan). Many also carry economy and regional brands for less critical jobs. Stock of a given brand and size differs from one supplier to the next, so confirm it when you ask for a quote.

Who Makes the Best Roller Bearings?

The brands above are widely seen as the leading roller bearing makers, but the best bearing is simply the right one for your machine, bought genuine. Many plants stick to one or two brands to keep spares and paperwork simple. If your equipment maker names a brand or bearing code, use it — especially while the machine is still under warranty.

Are Roller Bearings Manufactured in Saudi Arabia?

Most roller bearings used in KSA are made by international manufacturers and sold through authorized distributors and industrial suppliers in the Kingdom. When a listing says "roller bearing manufacturer in Saudi Arabia", check whether the company actually makes bearings or distributes imported brands.

How to Avoid Buying Counterfeit Roller Bearings

Fake bearings can look identical to the real thing, then fail early and cost you far more in downtime. Protect yourself with these checks:

✓ Buy From Authorized Sources: Use authorized distributors or suppliers who can show where their stock comes from.

✓ Ask for Paperwork: Request a certificate of origin or conformity, and mill test certificates where your project calls for them.

✓ Inspect the Packaging: Look for blurry printing, spelling mistakes or codes that don't match between box and bearing.

✓ Use Brand Verification Tools: Check doubtful bearings with tools such as the SKF Authenticate app.

✓ Question Low Prices: A premium brand priced far below the market is a warning sign.

How to Prevent Premature Roller Bearing Failure

Most early bearing failures come from causes you can control: poor lubrication, contamination, bad mounting, misalignment and overloading. Pick the right bearing, fit it properly, seal it well and grease it on schedule, and most of these problems go away.

ISO 15243 sets out the standard bearing damage types, which helps maintenance teams track down the real cause instead of just swapping the part.

How Long Does a Roller Bearing Last?

There is no fixed lifespan. A bearing's rating life (L10) is calculated from its dynamic load rating and the actual load, and real service life also depends on speed, lubrication, contamination and how well it was fitted. A well-chosen, well-maintained bearing can run for years; a dirty or poorly greased one can fail within weeks. Regular vibration and temperature checks let you replace bearings before they break down.

What Information Do You Need to Order a Roller Bearing?

To get an accurate quote fast, send the supplier the full bearing code (or the type and dimensions if the code can't be read), along with quantity, brand preference and delivery location.

1. Full bearing code including suffixes, for example NU314 ECJ/C3
2. No code? Send the bearing type plus bore diameter, outside diameter and width in mm
3. Preferred brand or the alternatives you will accept
4. Quantity, and whether it is a one-off or a repeat order
5. Application and conditions — load, speed, temperature and contamination
6. Documents needed, such as certificates or Aramco material numbers
7. Delivery city or site and the date you need it by

Frequently Asked Questions