Industrial plants across Saudi Arabia rely on screw compressors to keep pneumatic tools, process lines, and utility systems running without interruption. Whether a manufacturing plant needs continuous 24/7 air supply, a food processing line requires oil-free compressed air, or a construction site needs a portable unit for a temporary installation, the right screw compressor supplier can be found through FYIND's verified network across Riyadh, Jeddah, Dammam, Khobar, Jubail, and other industrial hubs in the Kingdom.
This page lists verified screw compressor suppliers in KSA, covers the technical specifications procurement teams typically compare, and provides a checklist to work through before requesting a quotation. Installation, commissioning, preventive maintenance, and spare parts support are noted where suppliers offer them, so you can shortlist based on more than price alone.
| ISO 1217 Performance test standard |
2 Types Oil-injected / oil-free |
10–20 Yrs Typical service life |
SAR 8K–500K+ Indicative KSA price range |
Where screw compressors are specified across Saudi industry:
At a Glance — Key Takeaways
Distributors, manufacturer representatives, and trading companies covering Riyadh, Jeddah, Dammam, Khobar, and Jubail. Contact each supplier directly to confirm current stock, brand availability, and lead time.
Al Khobar, KSA · Verified Supplier · Compressed Air & Chiller Distributor
Phone: +966 13 887 6070 | Location: Al Jawahara Business Towers, Al Thuqbah, Al Khobar | Industries: Oil refining, petrochemical, steel, power, cement, food & beverage
Products Supplied
Why Choose 3T Saudi
Riyadh, KSA · Verified Supplier · Manufacturer Channel Partner
Phone: +966 92 000 5798 | Location: Al Manakh, Riyadh | Industries: Multi-sector industrial and process facilities
Products Supplied
Why Choose USTC
Al Khobar, KSA · Verified Supplier · Manufacturer Direct
Phone: +966 13 839 5600 | Location: Olayan Complex, Dammam–Khobar Highway, Al Khobar | Industries: Manufacturing, oil & gas, construction, general industrial
Products Supplied
Why Choose Atlas Copco Saudi
Jubail, KSA · Verified Supplier · Manufacturer Representative
Phone: +966 58 032 6618 | Location: Industrial Area No. 3, Al Jubail | Industries: Petrochemical, industrial manufacturing
Products Supplied
Why Choose ELGi Jubail
Riyadh, KSA · Verified Supplier · Manufacturer Representative
Phone: +966 55 904 1162 | Location: Ahmad At Tamimi Street, Riyadh | Industries: Central-region industrial buyers
Products Supplied
Why Choose QurumTechnical
Jeddah, KSA · Verified Supplier · Manufacturer Representative
Phone: +966 55 704 9436 | Location: An Nahdah, Jeddah | Industries: Western Region manufacturing and industrial buyers
Products Supplied
Why Choose Ingersoll Rand Jeddah
Riyadh, KSA · Verified Supplier · Compressor Specialist
Phone: +966 50 318 2445 | Location: Street 41, New Industrial Area, Riyadh | Industries: General manufacturing and workshops
Products Supplied
Why Choose Namerah Industrial
Riyadh, KSA · Verified Supplier · Compressor Specialist
Phone: +966 54 582 1338 | Location: Watheeth Street, Al Mashael, Riyadh
Products Supplied
Why Choose BRC Compressors
Riyadh, KSA · Verified Supplier · Industrial Equipment Trading
Phone: +966 11 402 2801 | Location: Al Amal, Riyadh
General industrial equipment supplier based in Riyadh. Contact directly to confirm current screw compressor models, brands carried, and delivery timelines for your capacity and pressure requirements.
Riyadh, KSA · Verified Supplier · Industrial Trading
Phone: +966 11 295 3508 | Location: Al Kharj Road, Riyadh
Long-established Riyadh-based industrial trading and equipment company. Contact directly for current screw compressor availability, capacity range, and industry-specific packages.
Riyadh, KSA · Verified Supplier · Machinery Trading
Phone: +966 59 953 5536 | Location: Haroon Al Rashid Road, Riyadh
Riyadh-based machinery trading company. Contact directly to confirm screw compressor brands stocked and lead times for delivery.
Dammam, KSA · Verified Supplier · Industrial Trading
Phone: +966 13 887 5722 | Location: Al Khalidiyah Al Janubiyah District, Dammam
Dammam-based supplier serving the Eastern Province industrial corridor. Contact directly to confirm brands, capacities, and support for oil & gas or petrochemical-grade installations.
Jeddah, KSA · Verified Supplier · Industrial Solutions
Phone: +966 12 657 6874 | Location: Al Rawdah District, Jeddah
Jeddah-based industrial solutions provider, relevant for buyers in the Western Region needing local delivery and support.
Riyadh, KSA · Verified Supplier · Cooling & Trading
Phone: +966 11 479 0340 | Location: Al Malaz, Riyadh
Riyadh-based cooling and trading company. Contact directly to confirm screw compressor product lines carried alongside their cooling equipment offering.
Dammam, KSA · Verified Supplier · Vehicle & Machinery
Phone: +966 13 826 1477 | Location: King Abdulaziz Rd, Gharb Al Dhahran, Dhahran
Established vehicle and machinery company with a presence in Dhahran, serving the Eastern Province industrial base.
Riyadh, KSA · Verified Supplier · Industrial Trading
Phone: +966 59 454 7797 | Location: Shifa District, Riyadh
Riyadh-based industrial trading establishment. Contact directly to confirm current screw compressor stock and brands.
A compressor sized correctly for a food packaging line will not suit an oil refinery's instrument air system, and a portable diesel unit fit for a construction site is the wrong choice for a 24/7 manufacturing floor. The breakdown below matches compressor type to buyer situation.
A mid-sized manufacturing plant running three shifts typically needs continuous compressed air in the 100–500 CFM range at 7–10 bar, with little tolerance for downtime. If air demand fluctuates between shifts heavier during production runs, lighter during changeovers a variable speed screw compressor reduces energy consumption by matching motor speed to actual demand rather than running at full load continuously. Where demand is steady around the clock, a fixed speed screw compressor can be the more cost-effective choice, since VSD units carry a higher upfront cost that pays back mainly under variable load conditions.
Buyers in this category should confirm duty cycle rating (continuous vs. intermittent), motor power in kW, and whether the supplier can support installation and a preventive maintenance contract, since unplanned downtime on a production line is far costlier than the compressor itself.
Food and beverage plants and pharmaceutical manufacturers use compressed air in direct or near-direct contact with the product for packaging, pneumatic conveying, or instrument air. In these settings, any trace of compressor oil in the air stream is a contamination risk. An oil-free screw compressor is the standard specification here, and buyers should ask suppliers for air quality class documentation rather than assuming "oil-free" alone is sufficient proof.
Because oil-free units run at tighter tolerances, maintenance intervals and genuine spare parts availability matter more here than in general industrial use. Ask whether the supplier stocks parts locally in Saudi Arabia or imports on request this affects downtime if a breakdown occurs mid-production.
Automotive assembly lines run pneumatic torque tools, paint booths, and robotic actuators simultaneously across multiple stations—pressure drops here affect torque accuracy and paint finish. A correctly sized rotary screw compressor with adequate receiver capacity smooths demand spikes. Namerah Industrial and BRC Compressors, both Riyadh-based specialists, are relevant for buyers sourcing standard industrial screw units for this use case.
Construction sites and workshops need intermittent-use, dust-tolerant units that can be relocated between sites—reliability under rough conditions matters more than air purity here. Atlas Copco Saudi's portable diesel-driven range and general trading suppliers such as Al Hazm and Al Tadbir Trading are common sourcing routes for this segment.
Oil, gas, and petrochemical sites in the Eastern Province operate instrument air and process air systems that must stay online in ambient temperatures that regularly exceed 45°C in summer. Here, cooling method (air-cooled vs. water-cooled) and the compressor's rated operating temperature range matter as much as capacity and pressure. A high pressure screw compressor rated for continuous duty and high ambient operation, paired with a properly sized dryer and receiver, reduces the risk of thermal shutdowns during peak heat.
Procurement teams in this sector typically also require documentation for vendor approval processes (common with Saudi Aramco and SABIC-affiliated projects), so ask suppliers directly about their track record with similar approvals before shortlisting.
| Compressor Type | Typical Specifications | Common Applications | Relevant KSA Supplier |
| Oil-Injected Screw Compressor | 7–13 bar, 30–10,000 CFM, air or water cooled | General manufacturing, workshops, tooling | 3T Saudi, Namerah Industrial |
| Oil-Free Screw Compressor | Certified air quality class, tighter service tolerances | Food, beverage, pharmaceutical, electronics | Atlas Copco Saudi, 3T Saudi |
| Variable Speed Drive (VSD) | Motor speed matched to demand, higher upfront cost | Plants with fluctuating shift-based air demand | Atlas Copco Saudi, USTC (Gardner Denver) |
| Fixed Speed Screw Compressor | Constant motor speed, continuous duty rated | Steady, round-the-clock demand facilities | BRC Compressors, Khusheim Corporation |
| High Pressure Screw Compressor | Above 13 bar, high-ambient rated, continuous duty | Oil & gas, petrochemical instrument air | GTE, ELGi Jubail, 3T Saudi |
| Portable/Rental Screw Compressor | Diesel or electric drive, skid or towable chassis | Construction sites, temporary installations | Atlas Copco Saudi |
Screw compressor quotations can look similar on price while differing significantly in running cost and suitability. These are the specifications worth comparing line by line:
| Free Air Delivery (FAD/CFM) | Actual usable air output, not the nominal motor rating this is what determines if the unit meets your plant's demand. |
| Working Pressure (bar) | Must match the highest-pressure tool or process on your line, with margin for pressure drop across piping. |
| Motor Power (kW/HP) | Directly tied to energy cost compare specific power (kW per 100 CFM) rather than motor size alone. |
| Fixed Speed vs. VSD | VSD suits variable demand; fixed speed suits steady, continuous demand. |
| Cooling Meth | Air-cooled units are simpler to install; water-cooled units suit high-ambient or high-duty-cycle sites with available cooling water. |
| Duty Cycle | Continuous duty units are built for 24/7 operation; intermittent-rated units are not. |
| Air Quality (Oil-Free / Oil-Injected) | Determined by end-use food, pharma, and electronics typically require oil-free air. |
| Noise Level | Relevant for indoor installations near occupied work areas or hospitals. |
| Controller Type | Smart controllers with remote monitoring reduce unplanned downtime by flagging issues before failure. |
| Receiver Tank & Dryer Compatibility | Confirm the compressor is sized to work with your existing or planned receiver and dryer, not sold as a standalone unit. |
| Service Interval | Affects lifecycle maintenance cost ask for the manufacturer's recommended interval, not just the supplier's estimate. |
Compressor Trips Offline During Peak Summer Heat
An air-cooled unit installed for general manufacturing use starts nuisance-tripping on high discharge temperature once ambient air passes roughly 45–48°C, common in Eastern Province summers, especially if the unit sits in an enclosed plant room with poor ventilation.
Fix: Confirm the unit is rated for high-ambient continuous operation before purchase, not just standard duty. Water-cooled units or improved plant room ventilation resolve this for units already installed. GTE and 3T Saudi, both serving the Eastern Province, stock compressors specified for local ambient conditions.
Oil Carryover Contaminating a Packaging Line
A food packaging plant installed a standard oil-injected screw compressor to save on upfront cost, then found trace oil residue affecting product-contact packaging during quality audits.
Fix: Replace with a certified oil-free unit, or at minimum add coalescing and activated carbon filtration rated for the required air quality class—filtration reduces but does not eliminate the risk that a true oil-free compressor removes at the source. Specify oil-free explicitly when requesting quotations from suppliers like Atlas Copco Saudi or 3T Saudi.
Energy Bills Higher Than Expected on a Fixed Speed Unit
A plant running variable shift patterns installed a fixed speed compressor sized for peak demand, then found it running near-idle (and still consuming significant power) for large parts of the day.
Fix: Log actual demand across a full week before resizing, then compare against a VSD unit's payback period at your electricity tariff—VSD typically pays back faster the more variable the load profile is. Atlas Copco Saudi and USTC can both quote VSD alternatives against a logged demand profile.
Spare Parts Delay Extends Unplanned Downtime
A plant using an imported compressor brand with no local representative waited weeks for a replacement airend part, extending what should have been a short repair into a major production loss.
Fix: Before purchase, confirm local spare parts stock and typical lead time directly with the supplier—not just brand reputation. Manufacturer-direct suppliers such as Atlas Copco Saudi or authorized channel partners like USTC (Gardner Denver) typically hold more local stock than general trading companies reselling multiple brands.
Two decisions determine most of a screw compressor's suitability and running cost:
| Decision | Choose This If… |
| Oil-Free | Compressed air contacts product or sensitive instruments (food, pharma, electronics, hospitals) |
| Oil-Injected | General industrial air, pneumatic tools, no product contact risk—lower upfront and running cost |
| Variable Speed (VSD) | Air demand fluctuates significantly through the day or between shifts |
| Fixed Speed | Demand stays close to constant around the clock—VSD's efficiency edge shrinks under steady load |
Q: Why does one 30 CFM compressor cost half of another?
Oil-free construction, VSD control, continuous-duty rating, and manufacturer-direct sourcing all add cost over a basic fixed-speed oil-injected unit from a general trading company. Price alone does not tell you which is right for your application—match the specification to your use case first.
| Compressor Class | Approx. Capacity | Indicative Price (SAR) |
| Small workshop, fixed speed oil-injected | 5–15 HP | SAR 8,000–25,000 |
| Mid-size industrial, fixed speed oil-injected | 20–50 HP | SAR 30,000–90,000 |
| Mid-size industrial, VSD | 20–50 HP | SAR 45,000–120,000 |
| Oil-free industrial | 30–75 HP | SAR 90,000–220,000 |
| Large industrial / process (fixed or VSD) | 100 HP+ | SAR 200,000–500,000+ |
These ranges are indicative market estimates only, not quotes from any specific supplier listed on this page. Actual pricing depends on brand, VSD vs. fixed speed, oil-free vs. oil-injected, installation scope, and current supplier stock—request a formal quotation for accurate figures.
Which screw compressor is suitable for continuous manufacturing?
A continuous-duty rated fixed speed or VSD unit, sized to actual logged demand with margin for leaks and future expansion—confirm the duty cycle rating explicitly, since not every unit is built for 24/7 operation.
Should I choose fixed speed or VSD?
VSD if demand fluctuates significantly through the day; fixed speed if demand stays close to constant, since VSD's payback narrows under steady load.
Which industries require oil-free compressed air?
Food and beverage, pharmaceutical, electronics, and hospital applications typically require oil-free air to avoid contamination risk in processes with product contact or sensitive equipment.
How do I find a screw compressor supplier near my facility?
3T Saudi and Atlas Copco Saudi serve Al Khobar; ELGi and GTE serve the Jubail–Dammam corridor; USTC, Khusheim, Namerah, BRC, Al Hazm, Saif National, Zilal Cooling, and Al Tadbir serve Riyadh; Al Hawaiya and Ingersoll Rand Jeddah serve the Western Region. Contact the supplier closest to your site for the fastest turnaround.
Which suppliers offer installation and commissioning?
Manufacturer-direct suppliers such as Atlas Copco Saudi and channel partners like USTC typically offer full installation and commissioning support. Confirm scope directly with each supplier, since coverage varies.
How can I reduce compressor energy costs?
Right-sizing to actual demand, fixing air leaks, and switching to VSD control under variable load are the three changes with the biggest impact on lifetime running cost.
What should I compare before requesting quotations?
Compare FAD (not nameplate CFM), specific power, duty cycle rating, cooling method, service interval, local spare parts stock, and what installation and warranty support is included—not price alone.
How do I determine the right CFM for my factory?
Add up the air consumption of every tool and process that could run simultaneously, then add a margin (commonly 20–30%) for leaks and future expansion. A supplier can help formalize this into a sizing calculation once you provide equipment specifications.
Should I choose a fixed speed or variable speed screw compressor?
Choose variable speed if your air demand fluctuates significantly through the day; choose fixed speed if demand stays close to constant, since VSD's efficiency advantage is smaller under steady load.
Which industries require oil-free compressed air?
Food and beverage, pharmaceutical, electronics, and hospital applications typically require oil-free air to avoid contamination risk in processes with product contact or sensitive equipment.
What maintenance schedule should I expect?
This depends on the manufacturer and duty cycle ask the supplier for the manufacturer's recommended service interval rather than assuming a generic schedule, since oil-free and continuous-duty units often require closer intervals than standard oil-injected units.
Can suppliers provide installation and commissioning in Saudi Arabia?
Many of the suppliers listed above offer installation and commissioning support confirm this directly with each supplier, since scope and coverage area vary by company.
How can I reduce compressor energy costs?
Right-sizing the compressor to actual demand, fixing air leaks, and switching to VSD control under variable load are the three changes with the biggest impact on running cost over the compressor's lifetime.
What should I compare before requesting quotations?
Compare FAD (not nameplate CFM), specific power, duty cycle rating, cooling method, service interval, and what installation, warranty, and spare parts support is included not price alone.
0 
