0 
Sorbent Pad Suppliers in KSA | Absorbent pads
Saudi industries running oil and gas sites, ports, warehouses and workshops need sorbent pads on hand at all times, and the supplier chosen decides whether that pad soaks up the leak in seconds or falls apart mid-use. This guide lists the working sorbent pad suppliers across Jeddah, Dammam and the Eastern Province, the actual brands each one stocks, what those pads cost, and how to pick the right one for a specific spill type instead of guessing.
Quick answer: if the spill is oil, fuel or grease, use an oil-only pad (usually white). If it is an unknown chemical or hazardous liquid, use a chemical/hazmat pad (usually yellow). If it could be either, a universal grey pad works for both but does not repel water like an oil-only pad does.
Verified Sorbent Pad Suppliers in Saudi Arabia - Riyadh, Dammam, Jeddah
| Supplier | City | Brands Carried | Contact |
|---|---|---|---|
| Magus International | Jeddah | Lubetech, 3M | +966 12 654 7808 |
| Goldenwell (Golden Well Trading) | Dammam | Jet Spill | +966 54 269 0906 |
| Safex Safety KSA | Jeddah | Drizit Extreme, Spilltech | +966 12 602 2042 |
| REDA Safe | Saudi Arabia (regional) | Brady SPC | 920 006 023 |
| Sunaid Arabia Trading EST | Eastern Province | Ultrasorb, Schoeller, Forte | +966 13 835 3500 |
Magus International, Jeddah
EST. 1979 LUBETECH DISTRIBUTORMagus International, a division of Fakhry United Trading Co, has run out of Jeddah since 1979 and holds warehousing in Riyadh, Al-Jubail and Yanbu. It is the official UK Lubetech distributor for the Saudi market, which means buyers get the same pad specification used across European refineries, not a local rebrand. Their absorbent range covers oil-only, chemical and maintenance grades along with 3M sorbent sheets.
Address: Al Madina Road, Al Mamoun Plaza Trading Center, Office 203, Jeddah 23532 | Call +966 12 654 7808
Lubetech Premium Bonded Chemical Pad for Hazmat Cleanup in Jubail Petrochemical Plants
Bonded chemical pads (model 01-1001) are built for unknown or aggressive chemical liquids. The bonded construction keeps the pad from shredding when it is dragged across rough concrete or steel grating, which matters on a live plant floor where pads get walked on before anyone reaches them.
- Yellow colour coding for instant hazard recognition
- Perforated centre line so half a pad can be torn off for small drips
- Sold in cases, works with Lubetech chemical spill kits and bins
Typical market price: SAR 180 to 260 per case of 100 pads, depending on order volume
Delivered by: Magus International, Jeddah
CALL TO CONFIRM STOCK
3M Oil Sorbent Sheets HP-156 for Fast Wipe-Down in Automotive Workshops
The HP-156 sheet measures 430 mm by 480 mm, smaller than a standard industrial pad, which makes it easier to keep a stack next to a lift bay or engine bench. Mechanics use these for wiping oil residue off tools and floors rather than for containing an active spill.
- Compact size, low bulk, easy to store on a shelf or tool cart
- Absorbs oil and repels water, so it works on wet garage floors
- Good fit for automotive workshops and light manufacturing units
Typical market price: SAR 150 to 210 per pack of 100 sheets
Delivered by: Magus International, Jeddah, Riyadh, Jubail and Yanbu branches
Bonded Oil Only Roll n Box 21-1048 for Continuous Spill Zones on Production Lines
This is a roll housed in a dispenser box, size 38 by 22 cm per sheet, so operators tear off exactly what a leak needs instead of opening a fresh pad every time. It suits machinery with a slow, ongoing oil drip rather than a single spill event, since the box sits fixed at the leak point.
Typical market price: SAR 220 to 300 per roll box, model 21-1048
Best suited for: production lines, hydraulic presses, compressor rooms
Goldenwell (Golden Well Trading), Dammam
EST. 2013 JET SPILL BRANDGolden Well Trading runs out of the Khalidiyah Shamaliyah district in Dammam, close to the Eastern Province industrial belt, and sells under its own Jet Spill brand. Because they manufacture and package the pads themselves, order lead times are shorter than with importers, and bulk buyers can negotiate directly on pricing.
Address: Khalaf ibn Hisham St., Al Khalidiyah Ash Shamaliyah District, Behind Novotel Hotel, Dammam | Call +966 54 269 0906
Jet Spill Oil and Fuel Absorbent Pad for Marine and Port Fuel Handling in Dammam
Model JETOPL is a light-weight oil and fuel pad that repels water while soaking up hydrocarbons, so it floats and keeps working on wet dock surfaces or bilge areas. The cover stock adds wear resistance, which matters when pads are dragged across rough deck plating or gravel yards near the port.
- Repels water, absorbs oil, fuel and hydrocarbon-based fluids only
- Perforated for partial tear-off on smaller drips
- No VAT charged on export orders leaving Saudi Arabia
Pricing: quoted on request for bulk orders, model JETOPL
Delivered by: Golden Well Trading, Dammam
CALL FOR BULK RATE
Jet Spill Chemical Hazmat Pad Model JETCPM for Unidentified Leaks on Plant Floors
When staff cannot confirm what a spilled liquid actually is, model JETCPM is the safer default. The yellow colour tells anyone walking past that the area needs caution, and the pad handles a broad range of chemical liquids rather than just hydrocarbons.
Pricing: quoted on request, medium weight grade
Best suited for: mixed chemical storage rooms, tank farms, general plant housekeeping
Universal Grey Sorbent Pads for Warehouses Running Mixed Liquid Storage
Warehouses storing a mix of oils, coolants and cleaning chemicals do not want to stock three separate pad colours. Goldenwell's universal grey range absorbs both water-based and oil-based liquids, which cuts down on inventory but does not float on water the way an oil-only pad does.
Best suited for: mixed-use warehouses, loading bays, general maintenance stores
Safex Safety KSA, Jeddah
EST. 2011 DRIZIT EXTREME STOCKISTSafex Safety supplies industrial PPE and spill control gear to the oil, shipping, automobile and construction sectors across India, UAE and Saudi Arabia, and stocks the Drizit Extreme meltblown polypropylene range alongside Spilltech. Their pads are colour coded to BSIF standards, which is useful for sites that already train staff on UK or European colour systems.
Call +966 12 602 2042 | +966 54 113 9486
Drizit Extreme Meltblown Polypropylene Oil Pad for High Volume Refinery Spills
Sold in packs of 100, Drizit Extreme oil pads use ultrasonically bonded meltblown fibres laminated with a spunbond layer on one side, which gives them noticeably higher tensile strength than a basic loose-fibre pad. They will not shred when pulled taut over a jagged edge, which is the failure point most workshops complain about with cheaper pads.
- Hydrophilic on the chemical variant, hydrophobic on the oil-only variant
- Enhanced tear resistance from the spunbond laminate layer
- BSIF colour coding for quick visual sorting on multi-hazard sites
Typical market price: SAR 200 to 280 per pack of 100
Delivered by: Safex Safety, Jeddah
CALL FOR BULK RATE
Drizit Chemical Absorbent Socks for Diverting Spills Around Drums and Tanks
Pads alone cannot stop a spill from spreading across a large floor area. Drizit chemical socks, sold in packs of 30, are placed around drums, tanks or machinery to pool the liquid in one spot so pads can then absorb it, instead of chasing a spill across the room.
Best suited for: tank farms, chemical drum storage, containment bunding
Aain LT011 Spill Absorbent Mat, 20 Inch by 15 Inch, for Under-Equipment Drip Protection
This white mat is sized to sit permanently under a pump, valve or generator that has a known slow drip, rather than being used reactively after a spill happens. Facilities teams place these as a preventive layer during routine inspections.
Size: 20 in x 15 in | Best suited for: pump stations, generator rooms, valve manifolds
REDA Safe
BRADY SPC DISTRIBUTORREDA Safe supplies industrial safety equipment across Saudi Arabia and carries the US-manufactured Brady SPC absorbent line, a brand widely specified on international EPC and oil and gas contracts. If a project spec sheet names Brady SPC by name, REDA Safe is usually the fastest local route to it without waiting on a direct import order.
Brady SPC MXP-C20 Absorbent Pad for Contractor Sites Needing Spec-Matched Compliance
The MXP-C20 is Brady's standard maintenance-grade absorbent pad, commonly written into procurement lists for EPC and turnaround contracts because auditors recognise the brand by name. Choosing it avoids the back and forth of a client rejecting a generic substitute during a compliance walk-through.
- Recognised brand name for audit and procurement documentation
- General purpose absorbency for oils, coolants and mild chemicals
- Consistent sizing across batches, useful for repeat bulk ordering
Typical market price: SAR 210 to 290 per case, model MXP-C20
Delivered by: REDA Safe
CALL FOR QUOTE
Oil Plus Absorbent Pad for Heavy Machinery Bays with Constant Hydraulic Leaks
Oil Plus pads carry a denser fill built for repeated heavy soaking rather than a single light wipe, so they hold up under machinery bays where hydraulic oil leaks are a daily occurrence rather than a one-off incident.
Best suited for: heavy machinery bays, hydraulic press rooms, crane maintenance yards
Sunaid Arabia Trading EST, Eastern Province
CHEMICAL GRADE SPECIALISTSunaid Arabia Trading EST is an industrial trading company based in the Eastern Province, close to the Jubail and Dammam petrochemical corridor, and stocks Ultrasorb, Schoeller and Forte chemical absorbent lines. This is the practical pick for buyers whose spill risk is chemical rather than oil, since all three brands lean toward the yellow-coded chemical and hazmat side of the range.
Ultrasorb Chemical Absorbent Pad for Laboratory and Hazmat Cleanup in Jubail
Ultrasorb pads are built to handle aggressive chemicals including acids and solvents that would degrade a standard oil-only pad. Laboratories and hazmat response teams keep these on hand specifically because the pad material itself resists breaking down on contact with corrosive liquids.
Best suited for: laboratories, acid handling areas, hazmat response kits
Delivered by: Sunaid Arabia Trading EST
CALL FOR QUOTE
Schoeller Chemical Absorbent Pad for Alkhobar Petrochemical Storage Facilities
Schoeller pads are commonly stocked by petrochemical storage facilities around Alkhobar where large chemical drums are moved and stored in bulk. The pad range is built around consistent absorbency across batches, which large facilities need when ordering in high volume across multiple deliveries.
Best suited for: petrochemical drum storage, bulk chemical warehouses
Forte Absorbent Pad Chemical Grade for Power Plant and Water Treatment Sites
Forte chemical pads are used across power generation and water treatment sites, where the fluids involved range from mild cleaning chemicals to treatment additives that are not strictly hazardous but still need proper containment for housekeeping and safety audits.
Best suited for: power plants, water treatment facilities, utility housekeeping
Sorbent Pad Products Explained: Weight, Colour and Size
Oil-Only, Chemical Hazmat or Universal: Which Pad Colour Do You Actually Need?
Buyers often order pads based on price alone and then find the pad tears apart under real conditions. Three specifications determine whether a sorbent pad performs effectively: the liquid it is designed to absorb, the weight grade, and the size format.
| Pad Type | Colour | Suitable Liquids | Recommended Applications | Common Products & Keywords |
|---|---|---|---|---|
| Oil-Only Sorbent Pads | White | Engine oil, diesel, petrol, hydraulic oil, lubricants, transformer oil and other petroleum-based liquids. | Marine terminals, workshops, oil & gas facilities, ports, machine maintenance and outdoor spill response where water is present. | Oil Absorbent Pad Medium Weight SC-05-202, 3M™ Oil Sorbent Sheets HP-156, Bonded Oil Only Roll 'n' Box 21-1048. |
| Chemical / HazMat Sorbent Pads | Yellow | Acids, alkalis, solvents, coolants, corrosive chemicals and unknown hazardous liquids. | Chemical plants, laboratories, pharmaceutical facilities, chemical storage areas and hazardous spill response. | Ultrasorb Chemical Absorbent Pads, FORTE Chemical Absorbent Pads, SCHOELLER Chemical Absorbent Pads, Aain® LT011 Spill Absorbent Pads. |
| Universal Sorbent Pads | Grey | Oil, water, coolants, mild chemicals, paints and general industrial liquids. | Manufacturing plants, warehouses, maintenance workshops and facilities where multiple liquid types are handled. | Jet Spill Universal Grey Sorbent Pads, Universal Spill Containment Solutions, Industrial Spill Sorbent Pads. |
What Size Sorbent Pad Do You Need :
Choosing the right sorbent pad size depends on the spill volume, liquid type and how frequently spills occur. Buying oversized pads increases costs, while undersized pads require multiple replacements during a single cleanup.
- Small machinery leaks – 15 × 19 inch medium-weight sorbent pads.
- Hydraulic equipment and production lines – Heavy-duty oil sorbent pads.
- Large drum storage areas – Sorbent pad rolls or high-capacity pads.
- Chemical storage rooms – Chemical or HazMat sorbent pads.
- Fuel stations – Oil-only sorbent pads that repel water.
- High-traffic maintenance workshops – Medium or heavy-duty polypropylene sorbent pads.
Oil Sorbent Pads for Fuel Stations Handling Daily Diesel and Petrol Spills
Fuel stations experience daily diesel, petrol and lubricant spills around fuel dispensers, tanker unloading bays and forecourts. Oil-only sorbent pads are specifically designed to absorb hydrocarbons while repelling water, making them suitable for both indoor and outdoor spill response.
- Recommended products include Jet Spill Oil & Fuel Sorbent Pads, Brady SPC MXP-C20 Absorbent Pads and Drizit Extreme Meltblown Polypropylene Oil Sorbent Pads.
- Quickly absorbs diesel, petrol, hydraulic oil, lubricants and other hydrocarbon-based liquids.
- Repels rainwater and surface water, making it ideal for outdoor fuel dispensing areas.
- Available in medium-weight, heavy-duty and bonded polypropylene construction for different spill volumes.
- Typical prices range from SAR 180-650 per pack, depending on the brand, pad size and pack quantity.
- Available from Goldenwell (+966 54 269 0906), Safex Safety (+966 12 602 2042) and REDA Safe Saudi (9200 06023).
Low Profile Sorbent Pad vs Medium Weight vs Heavy Duty: What Is the Actual Difference?
| Specification | Low Profile Sorbent Pad | Medium Weight Sorbent Pad | Heavy Duty Sorbent Pad |
|---|---|---|---|
| Best For | Light drips, maintenance work and quick clean-ups. | Daily workshop, warehouse and factory spill control. | Large industrial leaks, refinery floors and high-volume spill response. |
| Absorption Capacity | Low | Medium | High |
| Typical Products | Low Profile Sorbent Pads | Oil Absorbent Pad Medium Weight SC-05-202 | Brady SPC MXP-C20, Jet Spill Heavy Duty Pads |
| Common Applications | Machine servicing, maintenance benches, equipment inspection. | Automotive workshops, warehouses, manufacturing plants and maintenance departments. | Oil & gas facilities, petrochemical plants, refineries and chemical processing units. |
| Replacement Frequency | High | Moderate | Low |
| Typical Price | Lowest cost per pad | Balanced cost and performance | Higher initial cost but lower replacement frequency |
| Buying Advice | Choose for occasional drips and routine maintenance. | Recommended for most industrial buyers because it suits everyday spill control. | Best for facilities where spill volume is unpredictable or large leaks are expected. |
Heavy-Duty Sorbent Pads for Generator Rooms with Continuous Oil Leaks
Generator rooms often experience continuous engine oil, diesel and coolant leaks. Heavy-duty sorbent pads absorb more liquid per sheet, last longer and reduce replacement frequency compared to lightweight pads, making them suitable for preventive maintenance around generators and backup power systems.
- Recommended products include Brady SPC MXP-C20 Absorbent Pads, Oil Plus Absorbent Pads and heavy-duty polypropylene sorbent pads.
- Suitable for generator rooms, diesel engines, compressors and hydraulic power units.
- High absorbency helps reduce replacement frequency during continuous oil leaks.
- Heavy-duty bonded polypropylene construction resists tearing during cleanup.
- Typical prices range from SAR 220-650 per pack, depending on GSM, sheet size and pack quantity.
- Available from REDA Safe Saudi (9200 06023) and Safex Safety (+966 12 602 2042).
Low Profile Sorbent Pads for Pumps, Compressors and Machine Bases
Low-profile sorbent pads slide easily beneath pumps, valves, compressors and machine bases where standard absorbent pads may not fit. They continuously capture minor oil leaks before they spread across production floors.
- Suitable for pumps, compressors, hydraulic equipment and machine bases.
- Available in oil-only, universal and chemical sorbent pad options.
- Designed to fit into confined maintenance spaces without interrupting operations.
- Common products include 3M™ Oil Sorbent Sheets HP-156 and Bonded Oil Only Roll 'n' Box 21-1048.
- Typical prices range from SAR 180-500 per pack, depending on sheet size and quantity.
- Available from Magus International (+966 12 654 7808) and Goldenwell (+966 54 269 0906).
HazMat Sorbent Pads for Battery Manufacturing and Chemical Storage Areas
Battery plants, laboratories and chemical storage facilities require HazMat sorbent pads that safely absorb aggressive chemicals including acids, alkalis and corrosive liquids without breaking down during spill response.
- Suitable for sulfuric acid, battery acid, caustic soda and many industrial chemicals.
- Available in high-visibility yellow for quick identification during emergency response.
- Recommended products include Ultrasorb Chemical Absorbent Pads, SCHOELLER Chemical Absorbent Pads and Aain® LT011 Spill Absorbent Pads/Mats.
- Provides rapid spill containment while helping improve workplace safety.
- Typical prices range from SAR 250-750 per pack, depending on absorbency and sheet quantity.
- Available from Sunaid Arabia Trading EST (+966 13 835 3500) and Safex Safety (+966 12 602 2042).
Meltblown Polypropylene vs Bonded Cellulose: Which Fibre Handles Rough Handling Better?
Meltblown polypropylene, used in the Drizit and Jet Spill ranges, is ultrasonically bonded and holds together under dragging, folding and repeated use. Loose cellulose-fill pads absorb well but shred faster once workers start folding or wringing them out, which happens constantly on an active floor. For sites with rough handling, spend the extra riyals on a bonded polypropylene pad rather than a basic cellulose one.
Real Problems Clients Face With Sorbent Pads and How to Fix Them
Pad saturates before the spill is fully contained
This usually means the weight grade is too light for the leak volume. Move from a low profile pad to a medium or heavy duty grade, and pair the pad with a sock placed around the source to slow the spread before the pad has to absorb the full volume.
Staff use the wrong colour pad on a chemical spill
Oil-only pads left in a chemical storage room get grabbed out of habit, and they do not absorb most chemical liquids properly. Keep chemical yellow pads physically separate from oil white pads, ideally in labeled bins at each hazard point, so the right pad is the only one within reach.
Pad tears apart on rough concrete or metal grating
Loose-fill or unbonded pads shred under friction. Switch to a bonded meltblown polypropylene pad with a spunbond laminate layer, such as Drizit Extreme or Lubetech Premium Bonded, which is built specifically for tensile strength.
Site runs out of pads mid-shift with no backup stock
Set a fixed reorder point, for example reorder when stock drops below one week of average usage, and confirm with the supplier how fast they can dispatch within the Eastern Province or Jeddah region before an emergency happens, not after.
Confusion over export VAT and bulk order pricing
Most suppliers quote bulk pricing directly rather than publishing it online, and export sales carry no VAT. Ask for a written quote covering per-unit price at your specific order volume, delivery timeline and VAT status before confirming a purchase order.
How to Choose the Right Sorbent Pad Supplier in Saudi Arabia
How many pads does a mid-size workshop need per month? A typical automotive or light manufacturing workshop with 5 to 10 bays uses 2 to 4 cases of 100 pads a month, more if hydraulic equipment is running daily. Track actual usage for one month before locking a supply contract.
Should I buy from a manufacturer or an importer? Local manufacturers like Goldenwell tend to have shorter lead times and more flexible bulk pricing. Importers like Magus International and Safex Safety carry internationally recognised brands that some project specs require by name. If the buyer needs brand compliance for an audit, go with the importer; if the buyer needs fast, flexible bulk supply, go local.
Does a more expensive pad actually save money? Yes, on high-friction or high-volume sites. A bonded meltblown pad costs more per unit than a basic cellulose pad but absorbs more liquid and lasts longer before tearing, which usually lowers the total cost per spill cleaned up.
Can one supplier cover both oil and chemical pads? Most of the suppliers above stock both ranges. Goldenwell and Magus International carry oil, chemical and universal grades under one order, which simplifies procurement for sites dealing with mixed spill risks.
Compare All Sorbent Pad Suppliers in KSA
| Supplier | Strength | Best For | Call |
|---|---|---|---|
| Magus International | Official Lubetech and 3M distributor since 1979 | Audit-compliant international brands | Call |
| Goldenwell | Local manufacturer, fast bulk turnaround | Ports, marine, Eastern Province plants | Call |
| Safex Safety KSA | Drizit Extreme bonded pads, BSIF colour coding | Refineries, high volume spill zones | Call |
| REDA Safe | Brady SPC, recognised on EPC contract specs | Contractor sites needing spec compliance | Call |
| Sunaid Arabia Trading EST | Chemical grade focus, Ultrasorb, Schoeller, Forte | Labs, petrochemical, water treatment | Call |
Prices listed are indicative market ranges and vary by order volume, delivery location and current stock. Call the supplier directly to confirm exact pricing and lead time before placing a purchase order.
Related Spill Control Products
- Absorbent Sock – Flexible spill containment barriers designed to surround leaking machinery, drums, pipelines and doorways, helping prevent liquids from spreading before using sorbent pads for final cleanup.
- Spill Kit – Complete spill response kits containing sorbent pads, absorbent socks, disposal bags, gloves and PPE for responding to oil, fuel, chemical and hazardous liquid spills.
- Absorbent Pad – Available in oil-only, chemical and universal variants for absorbing pooled liquids, machine leaks, fuel spills and industrial maintenance fluids after the spill has been contained.
- Absorbent Pillow – High-capacity absorbent designed for continuous leaks beneath pumps, valves, storage tanks, hydraulic equipment and industrial machinery where standard pads reach saturation quickly.
- Granular Absorbent – Loose absorbent material used on rough, uneven or outdoor surfaces where sorbent pads cannot make full contact, making it suitable for workshops, warehouses, loading bays and road spill cleanup.
Frequently Asked Questions
Can one sorbent pad absorb oil, chemicals and water?
Universal sorbent pads can absorb oil, water, coolants and many industrial liquids. However, for aggressive acids, alkalis or hazardous chemicals, a dedicated chemical or HazMat sorbent pad is the safer option.
How long can sorbent pads be stored before use?
When stored indoors in a dry place away from direct sunlight and chemicals, polypropylene sorbent pads generally maintain their performance for several years. Always keep unopened packs sealed until required.
Can sorbent pads be used outdoors during rain?
Oil-only sorbent pads are designed to repel water and continue absorbing oil during wet conditions. Universal and chemical sorbent pads absorb water as well, making them less suitable for outdoor oil spill cleanup during rain.
Do sorbent pad suppliers in KSA offer bulk pricing?
Yes. Most industrial suppliers offer discounted pricing for bulk purchases, recurring monthly supply contracts and project-based orders. Pricing generally depends on pad type, GSM, sheet size and order quantity.
What size sorbent pad is most commonly purchased?
The most common industrial size is approximately 15 × 19 inches (38 × 48 cm). Larger rolls and heavy-duty formats are preferred for production lines, tank farms and large spill response areas.
Are branded sorbent pads worth buying over generic products?
International brands such as Brady SPC, 3M™, Jet Spill, Drizit Extreme, Ultrasorb and Schoeller generally offer consistent absorbency, better tear resistance and reliable quality, making them a preferred choice for industrial facilities and HSE compliance.
Should I buy individual sorbent pads or a complete spill kit?
If you are setting up a new spill response station, a spill kit is usually more economical because it includes sorbent pads, absorbent socks, disposal bags and PPE. If you already have a spill station, purchasing replacement sorbent pads separately is typically the most cost-effective option.
What is the difference between a sorbent pad and an absorbent pad?
Both terms are often used interchangeably in Saudi Arabia. Sorbent pad is the technical term commonly used in industrial spill control, while absorbent pad is the broader market term. Both are available in oil-only, universal and chemical grades.
How many sorbent pads should I keep in stock?
It depends on your spill frequency and facility size. Small workshops may use one or two cases per month, while refineries, warehouses and manufacturing plants usually keep several cases in stock to ensure immediate spill response.
Can sorbent pads be reused after absorbing oil?
Most industrial sorbent pads are designed for single use. Once saturated with oil, fuel or chemicals, they should be disposed of according to your facility's waste management procedure.
Do sorbent pads expire?
Sorbent pads do not have a strict expiry date, but they should be stored in a clean, dry place away from direct sunlight and moisture. Proper storage helps maintain their absorbency and strength for several years.
Can sorbent pads absorb water?
Universal and chemical sorbent pads absorb water along with many other liquids. Oil-only sorbent pads repel water and absorb only petroleum-based liquids such as diesel, petrol and lubricating oil.
Which colour sorbent pad should I buy?
White pads are generally used for oil-only spills, grey pads are suitable for universal applications and yellow pads are intended for hazardous chemical spills. Choosing the correct colour helps staff respond quickly during emergencies.
Should I buy sorbent pads or sorbent rolls?
Pads are ideal for small to medium spills and everyday maintenance, while sorbent rolls are better suited for walkways, production lines and long work areas where continuous spill protection is required.
Which industries use sorbent pads the most?
Oil and gas facilities, petrochemical plants, fuel stations, marine terminals, manufacturing plants, automotive workshops, laboratories, warehouses, power plants and maintenance facilities are among the largest users of industrial sorbent pads.
Can sorbent pads be used with spill kits?
Yes. Sorbent pads are one of the main components of industrial spill kits. They are commonly used together with absorbent socks, pillows, disposal bags and personal protective equipment to provide complete spill response.
What should I check before buying sorbent pads from a supplier?
Compare the pad type (oil-only, universal or chemical), absorbency capacity, GSM, sheet size, material, pack quantity, brand, delivery time, bulk pricing and whether the supplier stocks replacement products for long-term supply.