A perforated red terracotta clay brick with a classic texture and vertical hole pattern. The perforations reduce unit weight while the fired clay body retains a compressive strength of approximately 50 N/mm2, making it suitable for facade and exterior wall work where appearance and load capacity are both required.

The smooth-texture version of the perforated D1 format, sharing the same dimensions, weight and strength but finished with a smooth face. Buyers select between D1 and D1N based on the surface appearance required for the facade, since packaging and pallet quantities are identical.

A tapered solid decoration brick with a 40 to 50 mm wedge profile, produced for arch construction and curved masonry detailing. The tapered face allows arches to be built without cutting units on site.

A hollow star-profile decoration block with an open geometric core. The perforated pattern makes it suitable for ventilated screen walls, jali-style partitions and decorative facade panels where light and airflow pass through the wall.

A square flat clay tile brick at 200 x 200 mm with a 35 mm thickness and square edges. Compressive strength of 50 N/mm2 supports pedestrian paving, walkways and landscaping surfaces.

The rounded-edge version of the T1 square tile, sharing identical dimensions, weight, strength and pallet quantities. The bullnose edge is specified for step nosings, pool copings and exposed paving edges where a square arris is not wanted.

A rectangular clay tile brick at 300 x 140 mm with a 45 mm thickness. The larger format covers more area per unit than the T1 square tile, reducing laying time on pavements and walkways.

The rounded-edge variant of the T2 rectangular tile brick, supplied in the same 300 x 140 x 45 mm format. Used as an edge and coping unit alongside T2 field tiles on the same paving run.

A thin slip brick at 20 mm thickness, used as a facing finish rather than a structural unit. At 0.6 kg per piece it applies a brick face to a wall without the load of full-depth masonry, and is supplied boxed at 28 bricks per box.

Length 400 mm, width 200 mm, height 200 mm, weight 13 kg, compressive strength 30 kg per square cm. Manufacturer-stated properties include sound insulation, heat insulation, fire resistance, moisture resistance and eco friendly composition. The 29-hole shield configuration is the highest hole count in this range, giving the block its insulating performance while keeping unit weight manageable for 200 mm wall construction.

A cubic insulated hollow clay brick at 20 x 20 x 20 cm weighing 6.25 kg, with water absorption stated at 12 percent. The insulated hollow construction suits partition and infill walls where thermal performance is specified.

A 15-hole hollow clay brick in the standard 200 x 200 x 400 mm block format, supplied in packs of 84 pieces. Pack weight and piece weight are both stated, which allows direct calculation of delivery loads for large wall areas.

An interlocking fire brick with a straight gap profile, produced for brick kiln construction. The interlocking geometry locates units against each other during build-up, and the fire brick body is intended for the high-temperature environment of kilns and industrial furnaces rather than general walling.

Red clay bricks supplied by Modern Building Materials in Riyadh. Colour is stated as red. Dimensions, weight and strength are not published for this line, so buyers should request the current specification sheet from the supplier before ordering.

General red clay bricks supplied from Al Ared, Riyadh. Product-level dimensions and strength figures are not published for this listing. Buyers requiring specific sizes, hole configurations or compressive strength should confirm availability directly with the supplier.

Supplier of the Aldiyar clay brick range covering decoration bricks, tile bricks, perforated bricks and slip bricks in Red Terracotta, all fired at 900 to 1,200 degrees C with Class A1 reaction to fire and asbestos-free composition under certificate DAS 69999316/31/Q.

Simon Red LAS Brick, Pipe Protector Brick N1, Decoration Brick Star Z1, Rounded Tile Brick T2U, Tile Brick T2, Rounded Tile Brick T1U, Tile Brick T1, Arch Decoration Brick D6, Smooth Solid Decoration Brick Red D1N, Classic Decoration Red Brick D1.

• Full published datasheets covering strength, absorption, firing temperature and pallet quantities
• Matched square-edge and rounded-edge tile formats for field and edge units
• Decorative profiles including arch and star patterns not available as standard blocks

Jeddah-based red brick factory supplying structural hollow clay bricks, load bearing wall units and ceiling hourdi blocks in 200 mm, 300 mm and 400 mm lengths under B-series reference codes.

Red Brick 29 Holes B202040F29 and B202020F29, Red Brick 9 Holes B12.52040, Red Brick 6 Holes B102030 and B102040, Red Brick 20, 15 and 10 Loadbearing Wall units, Red Brick Ceiling Hourdi B202540H and B202040HS.

• Structural range covering hollow, load bearing and ceiling applications from one factory
• Multiple wall thicknesses at 100, 150 and 200 mm with matching 400 mm lengths
• Hole counts from 6 to 29 for balancing weight, insulation and strength

Riyadh manufacturer of red bricks and clay products, supplying extension bricks, ornament and decoration bricks in square formats and paving bricks.

Extension Red Brick YM 401 AT, Ornament and Decoration Red Brick YD 502 S, YD 503 S and YD 504 S, Paving Red Brick YFB2 M.

• Ornament range in three face sizes at a common 113 mm height for mixed coursing
• Extension brick rated at 50 kg/cm2 compressive strength in the 400 x 200 x 200 mm format
• Structural, decorative and paving products available from one Riyadh manufacturer

Riyadh supplier of hollow clay bricks in the 200 x 200 x 400 mm block format, supplied in packs with stated piece and pack weights for load planning.

Hollow Brick 15 Holes 200 x 200 x 400 mm, supplied at 84 pieces per packet.

• Packaged supply at 84 pieces per packet simplifies site ordering
• Both piece weight and pack weight published for delivery calculation
• Central Riyadh location on King Fahad Road

Riyadh industrial manufacturer supplying insulated hollow clay bricks with published product codes and water absorption figures.

Insulated Hollow Brick WT 733A, 20 x 20 x 20 cm, 6.25 kg, water absorption 12 percent.

• Insulated hollow construction for thermal performance in partition walls
• Published product code and water absorption for specification compliance
• Industrial city location supporting volume supply

Riyadh building materials supplier stocking Mashbat red bricks in red colour.

Mashbat Red Bricks. Dimensions and strength are not published for this line, so confirm the current specification with the supplier.

• Riyadh location for local red brick supply
• Building materials range alongside clay brick lines

Riyadh supplier of red bricks, located on King Abdulaziz Branch Road in Al Ared.

Red Bricks. Product-level dimensions and strength figures are not published for this listing.

• Riyadh base on a main branch road for site delivery access
• Red brick supply for general construction requirements

Supplier of interlocking fire bricks produced for brick kiln manufacturing, supplied with tray packaging.

Straight Gap Interlocking Firebricks For Brick Kiln Manufacturing, code CS, 10 kg, supplied at 2 trays.

• Fire brick supply specifically for kiln and furnace construction
• Straight gap interlocking profile for stable kiln build-up