Explore a wide range of stainless steel, galvanized, and heavy-duty hexagonal bolts from certified manufacturers in the UAE. Available in metric sizes, full thread, and high-tensile grades for industrial use.
... Read more...
You are at the proper place whether you are a wholesale buyer searching for bulk hexagon bolt supplies throughout Dubai, Abu Dhabi, and Sharjah, a maintenance engineer replacing anchor systems, or a procurement manager seeking fasteners for a construction project. Fyind eliminates intermediaries and gives you immediate access to low pricing, different grades, and confirmed stock by putting you in direct contact with the top Fix Bolt manufacturers and suppliers in the UAE and Dubai.
A fix bolt, also known as a fix shield anchor bolt or just a fix bolt anchor, is a strong mechanical fastener used to firmly attach structural components to brick, masonry, and concrete. In contrast to conventional wall plugs, a fix bolt creates a compression-based hold inside the base material that resists pullout pressures by expanding when the bolt is tightened. Because of this, the anchor fix bolt is the go-to option for MEP (Mechanical, Electrical, Plumbing), infrastructure, building, and industrial maintenance in the UAE.
| Feature | Fix Bolt (Shield Anchor) | Standard Anchor Bolt |
|---|---|---|
| Installation Method | Drill hole → insert shield → tighten bolt | Cast-in-place or adhesive |
| Base Material | Concrete, masonry, brick | Concrete, steel |
| Reusability | Bolt is removable; shield stays | Not reusable |
| Load Type | Static & light dynamic | Heavy structural |
| Common Application | HVAC, signage, racking, MEP | Structural columns, base plates |
Fyind's trusted supplier network offers fix bolts in all standard metric sizes. Quick reference guide:
| Size | Bit Size | Common Application |
|---|---|---|
| Fix bolt 8MM | 8 mm drill bit | Light fixtures, cable trays, small brackets |
| Fix bolt 10mm | 10 mm drill bit | HVAC supports, shelving, conduit clamps |
| Fix bolt 12mm / FIX BOLT 12 MM LC | 12 mm drill bit | Structural brackets, heavy racking |
| Fix bolt 16mm | 16 mm drill bit | Steel structures, heavy equipment mounting |
| M6 (TUF-FIX FIX BOLT – SIZE M6 X 45 MM, Zinc Plated) | 6 mm drill bit | Light-duty fastening, electrical enclosures |
📌 Buyer Tip: Always match the drill bit diameter to the shield diameter rather than the bolt diameter. In the usual hollow block and concrete buildings in the UAE, over-drilling results in decreased holding strength.
The most used threaded fastener in UAE infrastructure, industry, oil and gas, and building projects. Its hexagonal bolt head permits high torque application using ordinary spanners and socket sets.
Types of Hex Bolts Available on Fyind UAE
✓ Hex Head Cap Screw and Hex Cap Screw — Threaded closer to the head than a normal bolt, used with pre-tapped holes in equipment assembly, automobiles, and machinery.
✓ Hex Flange Bolt | Hexagon Flange Bolts — Incorporates a washer-like flange behind the head to distribute load over larger surface area. Ideal for automotive subframe applications and thin metal sections.
✓ Hex Bolt made of stainless steel — Grade A2/304 and A4/316 offer long-term corrosion protection for coastal, marine, and chemical-resistant applications critical in UAE's humid and saline environment.
✓ Head Cap Screws for Hex Sockets — Uses recessed internal drive (Allen key) for neat, low-profile finish. Widely used in furniture-grade assembly, automation equipment, and precision machinery.
✓ Through Bolts — Pass completely through connected parts with nut on the other side. Used in steel-to-steel and steel-to-concrete connections where highest clamping force is needed.
Material & Grade Comparison Table
| Material | Grade / Standard | Best Use in UAE |
|---|---|---|
| Carbon Steel | 4.6, 8.8, 10.9 | General construction, structural steel |
| Alloy Steel | 12.9, B7 | Heavy machinery, petrochemical industry |
| Stainless Steel | A2-70 (304), A4-80 (316) | Marine, coastal, food-grade applications |
| Galvanized Iron | HDG / EG | Outdoor construction, MEP, HVAC |
| Nickel Alloy | ASTM/ASME SB-series | Oil & gas, high-temperature environments |
One of the most commonly purchased sizes in the UAE market, the m6 hex bolt is utilized in light fabrication, HVAC equipment, and electrical panel installation. Stainless, galvanized, and zinc-plated versions are available.
Purchasing sets of hex bolts and nuts guarantees thread matching and material compatibility. The standard for structural steel in UAE construction is hex nut bolt sets in Grade 8.8.
The bolt itself ends in an L- or J-shaped hook instead of a typical thread end. A common device used by MEP contractors and fit-out firms in Dubai and Abu Dhabi to hang conduit, pipes, and light fixtures from ceilings.
Fix Shield Anchor Bolt
The sleeve part that expands inside the drilled hole as the bolt is tightened. Always include the base material (concrete, brick, or hollow block) and the required load capacity when ordering.
Fyind is the UAE's dedicated B2B marketplace connecting industrial buyers to pre-verified hardware suppliers. 38+ hexagon bolt products listed from suppliers across Dubai, Sharjah, Abu Dhabi, and Ajman.
| Supplier | Specialization |
|---|---|
| Asia Bolts Industries LLC | Full range hex bolts, carbon & stainless, UNC/UNF/Metric |
| Prestige Metalloys LLC | Nickel alloy, high-spec hex head bolts, ASTM/ASME grades |
| Maimoon Building & Construction Material Trading LLC | Stainless hex bolt A2-80, M5–M56, full thread |
| Misar Trading Company LLC | GI bolts, galvanized hex bolts, bulk packs |
| Smooth Technical Trading | GI hex bolts, branded INDIA grade stock |
| Al Ghaith Energy LLC | Steel bolts, energy & industrial sector |
| Sadid Heavy Equipment & Spare Parts Trading LLC | SRP brand hex bolts, Turkey origin |
| Karnataka Hardware & Safety Equipments | Steel bolts, all standard sizes |
| Al Bonyan Building Materials TRDG – Deira, Dubai | Fix bolts and hardware to UAE's building materials market |
✓ Application Type — Anchoring into concrete/masonry? Choose a fix bolt anchor. Structural steel connections? Choose a hexagonal bolt head grade 8.8 or 10.9 with matching hex nut bolt.
✓ Environment — Outdoor, coastal, or humid environments? Always specify stainless hex bolt (A2 or A4) or hot dip galvanized. Indoor/dry: zinc-plated carbon steel is cost-effective.
✓ Size & Thread — Metric sizes (m6 hex bolt, M8, M10, M12, M16, M20, M24) are UAE standard. Imperial sizes (1/4" to 2") available for legacy equipment.
✓ Head Type — External drive: hex head bolt, hex cap screw, hex flange bolt. Recessed drive: hex socket head cap screw. Hook mounting: fix bolt hook type.
✓ Grade & Load Rating — For structural applications, request Grade 8.8 or higher. Light-duty use: Grade 4.6 is sufficient. Always match bolt grades to corresponding nut grade.
Fix bolts use a mechanical expansion sleeve (shield) installed after construction, making them quicker and more useful for retrofitting. Regular anchor bolts are cast into concrete during pouring and are not suitable for post-construction installation.
The drill bit diameter needed to prepare the hole in concrete before inserting the shield. For an M10 fix bolt, you drill a 10mm hole to the required depth before inserting the shield anchor.
Yes. Multiple Fyind-listed suppliers carry fix bolt 12mm and fix bolt 16mm in zinc-plated and stainless-steel variants. Submit an enquiry directly from the product page.
Hex flange bolts incorporate a flanged washer underneath the bolt head, dispersing gripping force over a larger surface. Very helpful in thin sheet metal, automotive, and HVAC duct installations.
"Hex socket screws" is used generally, but "hex socket head cap screw" or "hexagon socket head cap screw" specifically refers to a cylindrical-head version with an Allen-drive socket and fully or partially threaded shank — the most common form in precision machinery.
Through bolts completely travel through each element being linked using a nut and washer on the opposite face. They are the strongest bolt designs, frequently used in large construction and infrastructure projects in the UAE.
Fyind makes it easy to find the best UAE manufacturers of bolts, nuts, and washers for your project. All inquiries go straight to the supplier, whether you require a pallet of hexagon bolts and nuts for a building project in Dubai, a box of stainless steel hex head screws for a marine fit-out, or a mixed lot of fix bolts 8 mm, 10 mm, and 12 mm for an MEP job in Abu Dhabi. Fyind is the B2B marketplace for construction supplies, fasteners, and industrial hardware in the United Arab Emirates, serving buyers in Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah, and Umm Al Quwain.
0 .webp)
