Find Automotive Electrical Connector Suppliers in KSA for Vehicle Wiring, Sensors, Lighting & Power Systems
This page covers automotive electrical connectors in Saudi Arabia, including connector types, applications, sizes, technical specifications, product options, prices and suppliers. It helps buyers compare wire, plug, terminal, waterproof, multi-pin and high-current connectors and choose the right connector based on pin count, wire gauge, current rating, protection and installation requirements.
Automotive Electrical Connector Suppliers in Saudi Arabia
HARMATEK — Waterproof, Multi-Pin and Wiring Harness Connector Supplier, Riyadh KSA
RIYADH · Verified Supplier · Waterproof, Multi-Pin & Wiring Harness Connectors
Address: Prince Mohammed Bin Abdulrahman Bin Abdulaziz Road, Riyadh, KSA | Phone: +966 55 947 1701 | Mobile: +966 54 802 2461
Products They Offer
- Petros PTS18P H1 Wiring Harness Plug — an 18-pin wiring harness connector plug built for H1-pattern automotive harness runs, correct where a single connector needs to carry a large, pre-grouped bundle of circuits rather than individual wire-to-wire joints.
- 2 Pin Waterproof JHD Automobile Electrical Wire Connector Terminals — a sealed 2-pin terminal set with a rubber gasket interface, correct for simple sensor or light-circuit connections in engine-bay or exterior locations exposed to moisture.
- 3 Pin Female Or Male JWPF Waterproof IPX7 Automotive Connectors — an IPX7-rated 3-pin connector available in matching male and female halves, rated for temporary full water immersion rather than just splash resistance.
- Microswitches For Fault Indication — small switch units wired into a circuit to signal a fault condition (open door, low fluid, limit position) back to the vehicle's control system.
- Waterproof specialism: Two IPX7/waterproof-rated connector lines covers engine-bay and exterior circuit work specifically.
- Verified Supplier status: An independently verified listing.
- Two contact routes: Landline and mobile both published for formal orders and urgent enquiries.
Best for: Buyers who need waterproof or multi-pin harness connectors for engine-bay or exterior automotive wiring, with documented pin count and sealing rating.
Rowasi Al Rowad Trading Company — Wire, Terminal and Cable Connector Supplier, Riyadh KSA
RIYADH · Al Sinaiyah · Wire, Terminal & Cable Connectors
Address: Ibn Awn, Al Sinaiyah, Riyadh, KSA | Phone: +966 55 844 8287 | Mobile: +966 55 904 0575
Products They Offer
- Swpeet Automotive Electrical Wire Connectors Kit — a mixed kit covering multiple pin counts and terminal sizes, correct for repair shops handling varied wiring jobs rather than a single fixed connector spec.
- 2P Waterproof Automotive Connector Pair — a matched male/female 2-pin waterproof connector pair for sealed low-circuit-count automotive connections.
- Zibuyu Waterproof Car Wire Connector Plug — a sealed plug-style connector for general car wiring repair and modification work.
- Electrical Wire Connectors — a general stock range of wire-to-wire connectors for standard automotive repair and wiring jobs.
- Automotive Electrical Pin Connectors — individual pin terminal connectors sized to match common automotive wire gauges.
- Cable Connectors - Aluminum and Copper — heavier-gauge cable connectors in both aluminum and copper conductor options for battery and high-current power circuits.
Why Choose Rowasi Al Rowad Trading Company
- General repair range: The broadest stock of general-purpose wire, terminal, and cable connectors among the two suppliers covered here, suited to workshops handling mixed repair jobs.
- High-current options: One of the few suppliers stocking dedicated aluminum and copper cable connectors for battery and power-circuit work.
Best for: General automotive repair shops needing a broad wire and terminal connector range, plus higher-current cable connectors for battery and power circuit work.
Automotive Electrical Connector Applications in Saudi Arabia - Vehicle Wiring, Sensors, Lighting and Power Systems
| Automotive Application |
Recommended Connector Type |
What to Look For |
| Engine wiring and sensors | Automotive sensor connectors | Heat resistance, secure locking, pin configuration |
| Vehicle wiring harnesses | Automotive wiring connectors | Pin count, wire gauge, terminal compatibility |
| Battery and power circuits | High-current automotive connectors | Current rating, terminal size, heat resistance |
| Headlights and vehicle lighting | Automotive plug connectors | Correct pin arrangement, locking mechanism |
| Engine-bay wiring | Waterproof automotive connectors | Sealing, temperature resistance, corrosion protection |
| Electrical repairs | Automotive wire connectors | Wire gauge, crimp compatibility and terminal size |
| Vehicle control systems | Multi-pin automotive connectors | Pin count, contact arrangement and secure fit |
Common Automotive Electrical Connector Categories - Sealed, Unsealed, Multi-Pin and Quick-Disconnect
- •Sealed connectors: Built with rubber or silicone gaskets - IP67-rated types such as DEUTSCH DT connectors are the reference standard - to keep water and oil out of harsh engine-bay locations
- •Unsealed connectors: Used in dry, protected interior locations such as under the dashboard, where moisture and dust exposure isn't a factor
- •Multi-pin connectors: Handle complex signal arrays for engine management or infotainment systems, grouping many circuits into a single connection point
- •Quick disconnects: Allow fast plug-and-play removal for parts that need routine servicing, without unpicking individual wire joints
Types of Automotive Electrical Connectors in Saudi Arabia - Wire, Plug, Terminal, Waterproof and Multi-Pin Connectors
Automotive Wire Connectors - Secure Connections for Vehicle Wiring and Electrical Circuits
- •Typical build: Plastic housing with metal terminal contacts, wire gauge-matched (commonly AWG 22 to AWG 10 in automotive applications), crimp or solder-tab termination
- •Why it suits: The general-purpose connector for wire-to-wire joints throughout a vehicle's electrical system - correct wherever the circuit doesn't need waterproofing or a high pin count
- •Price: SAR 5-40 per piece | Where to buy: Rowasi Al Rowad Trading Company
Automotive Plug Connectors - Plug-and-Play Connections for Vehicle Electrical Components
- •Typical build: Matched male/female plastic-and-metal housing pair, application-specific pin arrangement, snap or latch locking mechanism
- •Why it suits: Correct for components that need routine removal - lighting units, sensors, control modules - since the plug-and-play design avoids re-splicing wires every time a part is serviced
- •Price: SAR 8-60 per piece | Where to buy: HARMATEK, Rowasi Al Rowad Trading Company
Plug Connectors in Saudi Arabia - Matching Male and Female Automotive Electrical Connections
- •Confirm before ordering: Male/female orientation, pin count, and locking type must all match the mating half already on the vehicle - a plug connector in Saudi Arabia that's the wrong gender or pin pattern won't seat regardless of otherwise-correct specs
- •Price: SAR 8-60 per piece | Where to buy: Rowasi Al Rowad Trading Company
Waterproof Automotive Electrical Connectors - Sealed Connections for Moisture, Dust and Engine-Bay Conditions
- •Typical build: Sealed housing with rubber or silicone gasket, rated IP67 (dust-tight, temporary immersion to 1m) or IPX7 depending on the line, 2-pin to multi-pin configurations
- •Why it suits: Mandatory for engine-bay, undercarriage, and any exterior wiring exposed to water, oil, or road dust - a standard unsealed connector will corrode and fail in these locations
- •Price: SAR 10-70 per piece | Where to buy: HARMATEK, Rowasi Al Rowad Trading Company
Automotive Terminal Connectors - Wire Termination for Vehicle Harnesses and Electrical Systems
- •Typical build: Single or multi-terminal conductive metal contacts, sized to a specific wire gauge, crimped rather than soldered for vibration resistance
- •Why it suits: The termination point at the wire end before it goes into a connector housing - correct wherever a bare wire needs a secure, repeatable mechanical and electrical joint
- •Price: SAR 3-25 per piece | Where to buy: HARMATEK, Rowasi Al Rowad Trading Company
Automotive Sensor Connectors - Electrical Connections for Engine and Vehicle Sensors
- •Typical build: 2-3 pin sealed connector, heat-resistant housing material rated for sustained engine-bay temperatures, secure locking tab
- •Why it suits: Engine sensors sit in a high-heat, high-vibration location - the connector needs both thermal resistance and a locking mechanism that won't work loose over time. Price: SAR 10-45 per piece | Where to buy: HARMATEK
Multi-Pin Automotive Connectors - Connecting Multiple Circuits Within Vehicle Electrical Systems
- •Typical build: 4 to 20+ pin housings depending on application - the Petros PTS18P H1 wiring harness plug is an 18-pin example - with a keyed housing that only mates one way
- •Why it suits: Correct for engine management ECUs, infotainment units, and any component with a large, pre-grouped bundle of circuits that would be impractical to connect individually. Price: SAR 15-90 per piece | Where to buy: HARMATEK
Automotive Battery Connectors - High-Current Connections for Vehicle Power Systems
- •Typical build: Heavy-gauge aluminum or copper cable connector, larger terminal cross-section than a signal-circuit connector, rated for sustained high-current draw rather than intermittent low-current signals
- •Why it suits: Battery and starter circuits draw far more current than a sensor or lighting circuit - undersized terminal cross-section here causes heat build-up and voltage drop under load. Price: SAR 20-120 per piece | Where to buy: Rowasi Al Rowad Trading Company
Sealed, Unsealed, Multi-Pin and Quick-Disconnect Automotive Connectors - Which One Suits Your Job
Sealed Automotive Electrical Connectors for Water, Oil and Dust Protection in Automotive Wiring Systems
- •Typical build: IP67-rated housing with a rubber or silicone gasket at the mating face and individual wire seals at each cable entry, DEUTSCH DT-pattern connectors are the reference standard
- •Why it suits: The only correct choice for engine-bay, undercarriage, and any exposed exterior wiring joint. Price: SAR 10-70 per piece | Where to buy: HARMATEK, Rowasi Al Rowad Trading Company
Unsealed Connectors for Dashboard, Interior and Protected Electrical Locations
- •Typical build: Standard plastic housing without a gasket, lower cost and simpler assembly than a sealed equivalent
- •Why it suits: Correct for dry, protected locations like under the dashboard - paying for a sealed connector here adds cost without any real-world benefit. Price: SAR 5-35 per piece | Where to buy: Rowasi Al Rowad Trading Company
Multi-Pin Connectors for Connecting Complex Signal and Control Circuits
- •Typical build: 4 to 20+ pin keyed housing, one correct mating orientation only, common on ECU and infotainment harness connections
- •Why it suits: Groups a large signal-circuit bundle into one connection point rather than dozens of individual wire joints. Price: SAR 15-90 per piece | Where to buy: HARMATEK
Quick-Disconnect Automotive Connectors for Fast Removal for Servicing and Electrical Repairs
- •Typical build: Snap or push-latch mechanism, tool-free disconnection, common on filters, sensors, and other routinely-serviced components
- •Why it suits: Correct for parts a technician will disconnect repeatedly over the vehicle's life - the fast plug-and-play removal saves labour time on every service visit. Price: SAR 8-55 per piece | Where to buy: HARMATEK, Rowasi Al Rowad Trading Company
Automotive Electrical Connector Specifications - Pin Count, Wire Gauge, Current Rating, Material and Protection
Automotive Electrical Connector Specification Comparison Table
| Connector Type/Product |
Pin Configuration |
Wire Compatibility |
Current Rating |
Voltage Rating |
Material |
Protection |
Typical Application |
| Automotive Wire Connector | Varies | Match to wire gauge | Depends on terminal | Depends on connector | Plastic housing + metal terminals | Standard / sealed options | Vehicle wiring |
| Automotive Wiring Connector | Multi-pin options | Vehicle harness wiring | Depends on terminal | Depends on connector | Engineering plastic + metal contacts | Standard / protected | Wiring harnesses |
| Automotive Plug Connector | Male/female configurations | Application dependent | Application dependent | Application dependent | Plastic housing + metal contacts | Locking options | Sensors and electrical components |
| Waterproof Automotive Connector | Multiple pin options | Automotive wire sizes | Depends on terminal | Depends on connector | Sealed housing + metal terminals | Waterproof/sealed | Engine bay, outdoor areas |
| Automotive Terminal Connector | Single or multi-terminal | Specific wire gauge | Terminal dependent | Circuit dependent | Conductive metal terminal | Housing dependent | Wire termination |
| Molex Automotive Connector | Varies by series | Series dependent | Series dependent | Series dependent | Automotive-grade housing and contacts | Series dependent | Vehicle electrical systems |
Automotive Electrical Connector Sizes in Saudi Arabia - Pin Count, Wire Gauge, Terminal Size and Connector Dimensions
Automotive Electrical Connector Size Comparison Table
| Connector Size Consideration |
Smaller Connector |
Medium Connector |
Larger Connector |
| Pin count | Low pin count | Medium pin count | High pin count |
| Wire size | Smaller automotive wires | Medium-gauge wiring | Larger power wires |
| Current requirement | Low-current circuits | General vehicle circuits | High-current applications |
| Physical space | Compact installation areas | General wiring locations | Larger electrical assemblies |
| Typical use | Sensors and signals | Lighting and vehicle electronics | Power and multi-circuit systems |
Automotive electrical connector sizes generally run from compact 1-3 pin sensor connectors through medium 4-10 pin lighting and general wiring connectors, up to large multi-pin or high-current battery and cable connectors. Confirm the physical connector dimensions and terminal size against the actual wire gauge and installation space before ordering, since a correctly-rated connector that's physically too large for the mounting location is still the wrong part.
How to Choose an Automotive Electrical Connector - Match the Connector to the Circuit and Application
- ✓Confirm the circuit's current draw: A sensor connector and a battery connector both carry "current," but a battery-rated connector's terminal cross-section is many times larger - undersizing here causes heat and voltage drop
- ✓Match pin count and gender exactly: to whatever the connector is mating with - there's no such thing as "close enough" on pin configuration
- ✓Assess the installation environment: engine-bay, undercarriage, and exterior locations need sealed/waterproof connectors; dry interior locations like under the dashboard don't
- ✓Check wire gauge compatibility: the terminal size inside the connector housing must match the wire gauge being crimped into it, not just the connector's overall pin count
- ✓Consider service frequency: components serviced routinely benefit from a quick-disconnect design; permanent connections don't need the extra cost of a quick-release mechanism
Automotive Electrical Connector Price in Saudi Arabia - Wire, Plug, Waterproof and Wiring Connector Costs
Automotive Electrical Connector Price Comparison Table
| Connector Category |
Typical Price Position |
Main Price Factors |
Best Suited For |
| Basic wire connectors | Low (SAR 5-40) | Material, terminal quantity and pack size | General wiring repairs |
| Automotive plug connectors | Low-Medium (SAR 8-60) | Pin count, housing and locking system | Component connections |
| Wiring harness connectors | Medium (SAR 15-90) | Pin count, terminals and housing complexity | Vehicle harnesses |
| Waterproof connectors | Medium-High (SAR 10-70) | Sealing, materials and environmental rating | Engine bay and outdoor wiring |
| Multi-pin connectors | Medium-High (SAR 15-90) | Number of contacts and connector design | Electronic control systems |
| Molex automotive connectors | Varies by series (SAR 10-120) | Series, contacts, housing and specification | OEM and professional vehicle wiring |
Automotive Electrical Connector Suppliers in Saudi Arabia - Riyadh, Jeddah, Dammam and Major Automotive Markets
Automotive Connector Suppliers in Riyadh - Vehicle Electrical and Wiring Components
- •Both suppliers covered in this guide - HARMATEK and Rowasi Al Rowad Trading Company - are based in Riyadh, giving capital-region buyers direct access to sealed, waterproof, wire, and terminal connector ranges
Automotive Connector Suppliers in Jeddah - Automotive Plugs, Terminals and Wiring Connectors
- •The suppliers profiled here are Riyadh-based - Jeddah buyers should confirm nationwide delivery terms directly, or source through a Western Region auto-electrical parts distributor for local stock
Automotive Connector Suppliers in Dammam - Vehicle Electrical Components and Harness Connections
- •Eastern Province fleet and commercial vehicle operators typically need higher-current battery and cable connectors alongside general wiring stock, given the concentration of heavy-vehicle and industrial fleet operations in the region
Automotive Electrical Connector Distributors in Saudi Arabia - Industrial and Automotive Wiring Solutions
- •Beyond dedicated automotive suppliers, general industrial electrical distributors across the Kingdom also stock Molex and similar automotive-grade connector series for OEM and professional repair use
Automotive Electrical Connector Installation Tips - Crimping, Weather Seals and Correct Fitting
- ✓Crimping over soldering: Use a mechanical crimping tool rather than solder - solder creates a rigid joint that snaps under the constant vibration a vehicle's wiring is exposed to, while a properly crimped terminal flexes with the harness
- ✓Weather seals: Slide rubber wire seals onto the cable before stripping and crimping - fitting the seal afterward, or skipping it, breaks the waterproof integrity of a sealed connector
- ✓Listen for the snap: Push the terminal pin fully into the housing until it clicks past the internal locking lever - a terminal that isn't fully seated can back out under vibration even if the connector halves are mated correctly
FAQs - Automotive Electrical Connectors in Saudi Arabia
What are automotive connectors?
An automotive connector is a component that joins two or more wires or circuits within a vehicle's electrical system, letting current or signal pass between them while allowing the connection to be made, broken, and remade for repair or servicing.
What are the different types of automotive electrical connectors?
The main categories are sealed connectors (IP67/IPX7-rated for wet or dusty locations), unsealed connectors (dry interior locations), multi-pin connectors (complex signal arrays), and quick-disconnect connectors (fast plug-and-play removal). Within these, connectors are further specified by wire, plug, terminal, sensor, and battery/high-current type.
What are the best electrical connectors for automotive use?
There's no single "best" connector - the right choice depends on the circuit's current draw, the installation environment, and pin count needed. For engine-bay and exterior wiring, a sealed IP67-rated connector such as a DEUTSCH DT-pattern type is the reference standard; for dry interior wiring, a standard unsealed connector is sufficient and more cost-effective.
What are the three types of connectors in electrical work?
A common general classification splits connectors into wire-to-wire connectors (joining two cable ends), wire-to-board connectors (joining a cable to a circuit board or module), and board-to-board connectors (joining two circuit boards directly). Automotive wiring uses mostly wire-to-wire and wire-to-board types.
Who is a leading supplier of automotive electrical connectors?
There's no single leading supplier across the whole Saudi market - HARMATEK and Rowasi Al Rowad Trading Company are two verified Riyadh-based suppliers, each carrying a different mix of sealed/multi-pin and general wire/terminal connector stock - compare their specific product ranges above against your requirement.
Who are some reputable electrical cable suppliers in Saudi Arabia?
For automotive-specific cable and connector supply, HARMATEK and Rowasi Al Rowad Trading Company are verified Riyadh suppliers. For broader industrial electrical cable, general industrial distributors across Riyadh, Jeddah, and Dammam also stock automotive-grade cable and connector series.
Who is the largest connector manufacturer?
Globally, Molex, TE Connectivity, and DEUTSCH (part of TE Connectivity) are among the largest and most widely recognised automotive connector manufacturers, with Molex automotive connectors and DEUTSCH DT-series sealed connectors both commonly referenced as industry standards. Availability of specific manufacturer series in KSA depends on the individual supplier's stock.
Why is crimping preferred over soldering for automotive connectors?
A soldered joint is rigid and can crack under the continuous vibration a vehicle's wiring experiences. A properly crimped terminal creates a gas-tight mechanical connection that flexes slightly with the harness, making it more vibration-resistant over the vehicle's service life.
Where can I find automotive electrical connector suppliers near me in Saudi Arabia?
HARMATEK and Rowasi Al Rowad Trading Company are both based in Riyadh and between them cover sealed, waterproof, wire, terminal, and high-current cable connectors. Match the supplier's product range to your specific connector type before ordering.
.webp)
