Chisel Suppliers in KSA | Cold Chisel, Flat Chisel, Masonry, Wood & SDS Chisels

Cold Chisel - KSA's Standard Hand Tool for Cutting and Shaping Metal

A hammer-driven hand chisel with a hexagonal or octagonal body, ground to a blunt cutting angle so it can shear cold metal without the edge collapsing. The whole performance of a cold chisel comes down to heat treatment - an under-hardened edge rolls over on the first strike, an over-hardened one chips.

• •Blade widths stocked: 4 mm, 16 mm, 18 mm, 19 mm, 25 mm
• •Lengths: 250 mm, 300 mm, 305 mm (hand) and 600 mm (SDS-Max machine version)
• •Materials: 40Cr alloy steel (Ingco), 45# carbon steel (TOTAL), heat-treated steel (Makita)
• •Products in KSA: Ingco Cold Chisel 19 × 16 × 305 mm, Conan Cold Chisel, Total Flat Cold Chisel With Hand Guard THT4221026, Makita D 34475 Cold Chisel 25 × 600 mm
• •KSA application: Fabrication shops and vehicle workshops in Riyadh and Dammam cutting rivets and bolts, plus general maintenance across industrial facilities

Flat Chisel - The Clearing Tool for Chipping, Channelling and Surface Removal

A wide, straight cutting edge that shears and lifts material across its full face rather than fracturing it at a point. Available in every shank system stocked in Saudi Arabia, plus hand-struck alloy steel and non-sparking versions. Blade width is the specification that decides everything: wider clears faster but demands more impact energy from the machine.

• •Tip widths stocked: 14 mm, 15 mm, 22 mm, 25 mm, 40 mm
• •Shank options: SDS-Plus (250 mm class), SDS-Max (400 mm class), 17 mm hex (280 mm), TE-C, hand-struck (254–304 mm)
• •Materials: Chrome alloy (Tolsen), high-alloy steel (Hilti), aluminium bronze (Kasweld non-sparking)
• •Products in KSA: Tolsen 75442 SDS Plus Flat Chisel 14 × 250 × 40 mm, Tolsen 75457 SDS Max Flat Chisel 18 × 400 × 25 mm, Tolsen 75451 Hex Flat Chisel 17 × 280 × 25 mm, HILTI TE CX FM Flat Chisel 15 mm Ultimate, Flat Chisel Alloy Steel, Non Sparking Flat Chisel, Non Sparking Hexagonal Flat Chisel 14 × 150mm
• •KSA application: Tile and render stripping on Riyadh fit-out projects, conduit chasing on MEP first-fix, and weld dressing in Dammam fabrication shops

Point Chisel and Bull Point - The Fracture Starter for Concrete Demolition

A point concentrates the entire impact of the machine into a single contact spot, cracking mass concrete rather than shaving it. Every demolition sequence starts with a point and finishes with a flat - buying only one of the two is the most common kit specification error on Saudi sites.

• •Lengths stocked: 200 mm, 280 mm, 300 mm, 350 mm, 410 mm, 400/600 mm
• •Weights: 0.8 kg (Makita A 80787), 0.903 kg (Be-Cu hex point), 1 kg (Makita D 34176) - heavier head equals more energy per blow
• •Hardening: Inductive hardening on premium ranges resists mushrooming, wear, and bending - the three failure modes that end a point's life
• •Products in KSA: Tolsen 75454 Hex Point Chisel 30 × 410 mm, DCA SDS Hex Point Chisel 17 × 280 mm, HILTI TE Y SM Pointed Chisel 400 600 mm, Makita D 34176 SDS Max Bull Point 300 mm, Makita A 80787 Bull Point 280 mm, Crown CPHHK CPA12 Pointed Cold Chisel 16 × 300 mm, Chisel Hex 6 Point Be Cu 350 mm 903 g, Non Sparking Point Chisel 20 × 200mm, Turkey Ball Point Chisel
• •KSA application: Slab and foundation breakout on Riyadh demolition programmes, and slag and scale chipping in Jubail welding bays using the non-sparking versions

SDS Chisel - SDS-Plus vs SDS-Max, the Compatibility Decision That Comes First

SDS is a shank system, not a chisel profile. SDS-Plus uses a 10 mm shank and fits rotary hammers; SDS-Max uses an 18 mm shank and fits demolition hammers. They are not interchangeable and no adapter makes them safely so. Confirm the chuck on your machine before you look at any product page.

• •SDS-Plus: 10 mm shank, chisels typically 250 mm, tip widths 22–40 mm - for chasing, tile removal, and light chipping
• •SDS-Max: 18 mm shank, chisels 250–600 mm, tip widths 25 mm and up - for slab breaking and structural concrete removal
• •TE-C / TE-Y / TE-S: Hilti's naming for SDS-Plus, SDS-Max, and its own TE-S combihammer system respectively
• •Products in KSA: Tolsen 75448 SDS Plus Chisel 14 × 250 × 22 mm, Tolsen 75442 SDS Plus Flat Chisel, Tolsen 75457 SDS Max Flat Chisel, Heller SDS Max Chisel, Sds Max Chisel 18 × 25 × 400 mm, Conan SDS Chisel, Makita B 64238 Premium Chisel 250 mm, HILTI TE SX Chisel Set Ultimate
• •Maintenance note: Keep the shank greased - a dry SDS shank wears both the chisel and the hammer mechanism inside the tool, which is far more expensive to replace

Wood Chisel and Heavy Duty Wood Chisel - Cr-V Blades for Joinery and Site Carpentry

A wood working chisel is defined by two things: blade steel and handle construction. Cr-V (chrome vanadium) holds a keen edge measurably longer than plain carbon steel between sharpenings, and a mallet-driven chisel needs a strike cap or impact-resistant handle or it splits. Widths run from 6 mm paring chisels up to a 38 mm Heavy Duty Wood Chisel.

• •Blade widths stocked: 6, 10, 13, 16, 19, 25 up to 38 mm
• •Blade length: 140 mm on standard bench sizes
• •Materials: CrV blade with two-component plastic handle (Tolsen), Cr-V with unique-design impact handle (EMTOP)
• •Products in KSA: Tolsen 25384 4 Pcs Wood Chisel Set (6, 13, 19, 25 mm), EMTOP Wood Chisel 140 mm (EWCL1601, 16 mm), Woodworking Chisel 10 To 38 mm, Heavy Duty Wood Chisel 38 mm
• •KSA application: Doorset and cabinetry fit-out across Riyadh and Jeddah joinery workshops, plus site carpentry on framing and shuttering work

Masonry Chisel, Bolster Chisel and Concrete Chisel - Hand Tools for Brick, Block and Stone

Three related but distinct hand tools. A Bolster Chisel has a wide 100 mm blade that spans a full brick face and splits it in one blow. A Masonry Chisel has a narrow 18 mm blade for working into mortar joints and along a scribed line. A Concrete Chisel is built heavier again for breaking out screed and slabs by hand. They complement each other on the same wall rather than substituting for one another.

• •Bolster: Brick Bloster Chisel, model BC-100, 100 mm blade width
• •Masonry: Masonry Chisel, model 12120102, 300 × 18 mm
• •Concrete: Conan Concrete Chisel; Crown CPHHK CPA12 Pointed Cold Chisel 16 × 300 mm for hand fracture work
• •Technique note: Score all four faces of a brick with the bolster before the final splitting blow - a single hard strike on an unscored brick gives an uneven break and wasted material
• •KSA application: Blockwork correction, opening-up works, and mortar bed stripping on renovation projects across Riyadh and the Eastern Province

Non-Sparking Chisels - Aluminium Bronze and Beryllium Copper for Saudi Petrochemical Sites

In a refinery, gas plant, or tank farm, material choice overrides every other specification. Aluminium bronze and beryllium copper chisels are softer and wear faster than steel - they cost more and last less - but they will not produce a spark when struck against metal. On a classified site this is not a preference, it is a condition of entry.

• •Aluminium bronze: High-strength alloy used on the Kasweld range; hexagonal bodies give better grip and rotational control
• •Beryllium copper (Be-Cu): The premium non-sparking alloy - also non-magnetic and corrosion-resistant, so it can be used near instrumentation and in coastal and offshore conditions
• •Sizes stocked: 14 × 150 mm, 20 × 200 mm, 25 mm class flat, and 350 mm / 903 g Be-Cu hex point
• •Products in KSA: Non Sparking Flat Chisel, Non Sparking Point Chisel 20 × 200mm, Non Sparking Hexagonal Flat Chisel 14 × 150mm, Chisel Hex 6 Point Be Cu 350 mm 903 g
• •KSA application: ARAMCO and SABIC facility shutdowns, Jubail and Yanbu petrochemical maintenance, and welding bays where hot work permits restrict spark generation

Cape / Cross-Cut Chisel, Bushing Tools and Powered Wall Chisels - The Specialist Profiles

Beyond the mainstream types sit a small group of profiles that solve one problem each. Specifying the general-purpose alternative for these jobs is slower and gives a worse result, which is why they exist as separate products.

• •Cape / Cross-Cut Chisel: Narrow cutting edge on a tapered blade for cutting keyways, grooves, and slots in metal. Cut the groove first with the cape profile, then clear with a wider flat chisel - a wide chisel attempting the groove binds and deflects
• •Narrow-profile products in KSA: Total Flat Cold Chisel With Hand Guard (4 mm head), Non Sparking Hexagonal Flat Chisel 14 × 150mm, HILTI TE CX FM Flat Chisel 15 mm Ultimate
• •Bushing tool: HILTI TE Y SKHM Bushing Tool 250 mm Ultimate, with carbide pins - textures and keys a concrete surface without fracturing it, used before bonded overlays and repairs
• •Powered wall chisel: WELLOO Wall Chisel at 1,900 rpm/min - cuts a channel at a set, repeatable depth along its full run, which hand or hammer chiselling cannot match on volume MEP first-fix
• •Ball point: Turkey Ball Point Chisel - rounded tip for dressing, punching, and forming metal where a sharp point would gouge or split the material instead of displacing it

Chisel Specifications - KSA Product Comparison

SDS-Max Chisel Ordered for an SDS-Plus Rotary Hammer - Delivery Arrives and Will Not Fit

A Riyadh fit-out contractor orders "SDS chisels" from a supplier list and receives 18 mm SDS-Max shanks. The site is running SDS-Plus rotary hammers with 10 mm chucks. The chisels physically cannot enter the tool, the crew loses a day, and the stock has to be returned or written off.

Fix: "SDS" alone is not a specification. State the exact system on the purchase order - SDS-Plus (10 mm shank) for rotary hammers, SDS-Max (18 mm shank) for demolition hammers. Never fit an adapter to bridge the two: energy transfer collapses and the chuck is destroyed. Al Darb Al Hadidi Limited Company (Riyadh) stocks both SDS-Plus and SDS-Max Tolsen chisels in the same catalogue, so a site running mixed machines can source both against one order and quote the shank on each line.

Cold Chisel Edge Rolling Over on the First Strike - Under-Hardened Body Steel

A Dammam fabrication workshop finds that a batch of cheap cold chisels deforms at the cutting edge within minutes of use on mild steel plate. The edge flattens instead of cutting, the tool skates, and the operator applies more force - which is when injuries happen.

Fix: Specify the body material and heat treatment on the order, not just the size. 40Cr alloy steel with heat treatment or heat-treated chrome alloy holds a cutting edge on steel; untreated mild steel bodies do not. Techno Zone (Al Jubail) stocks the Ingco Cold Chisel 19 × 16 × 305 mm in 40Cr with heat treatment and a limpid powder coating, and Total One Stop Tools Station (Riyadh) supplies the TOTAL THT4221026 in 45# carbon steel - ask for the material specification in writing before placing a bulk order.

Mushroomed Striking Head Shedding Metal Fragments - The Most Common Chisel Injury on Saudi Sites

Repeated hammer blows spread the struck end of a hand chisel into a mushroom shape. Once the mushroomed rim becomes work-hardened and brittle, a single blow can send a fragment flying at high speed - the mechanism behind most chisel-related eye injuries on construction and maintenance sites.

Fix: Inspect the striking head before every use and grind off any mushrooming back to a clean chamfer, cooling the tool in water so the temper is not lost. Issue eye protection as mandatory for all chisel work. Where tools are issued across a large workforce, specify guarded chisels - Total One Stop Tools Station (Riyadh) supplies the Total Flat Cold Chisel With Hand Guard, whose moulded guard also absorbs over-strike and protects the operator's hand when the hammer misses.

Steel Chisel Taken Into a Classified Area - Hot Work Permit Breach at a Jubail Plant

A maintenance crew carries standard steel chisels into a gas-risk zone during a shutdown because the non-sparking tools were not ordered in time. Work stops, the permit is withdrawn, and the shutdown window slips.

Fix: Treat non-sparking chisels as a long-lead item on any shutdown scope and order them at planning stage, not at mobilisation. Aluminium bronze covers most chipping and cutting; beryllium copper adds non-magnetic and corrosion-resistant properties for work near instrumentation. Kasweld (Dammam) manufactures a three-profile non-sparking range in aluminium bronze and publishes a certificates and quality assurance section for QA submissions, and Techno Zone (Al Jubail) stocks the 350 mm Be-Cu hex point for deeper vessel and pipework access.

Wood Chisel Handle Splitting Under a Mallet - Bench Chisel Used as a Struck Chisel

A Riyadh joinery workshop buys plain-handled wood chisels for hand paring, then uses them for mortise chopping with a mallet. The handles split within weeks, and the exposed tang becomes a hazard.

Fix: Separate the two duties at specification stage. For mallet-driven work, specify an impact-resistant or strike-capped handle and Cr-V blade steel, which also holds its edge longer between sharpenings. Al Darb Al Hadidi Limited Company (Riyadh) supplies the Tolsen 25384 4 Pcs Wood Chisel Set with CrV blades and two-component plastic handles across 6, 13, 19 and 25 mm, and Advanced Commercial Engines Company (Riyadh) stocks the EMTOP Wood Chisel 140 mm (EWCL1601) in Cr-V with a unique-design impact handle.

Riyadh · Tolsen & Heller Stockist · 7 Chisel References

Al Darb Al Hadidi Limited Company - Tolsen SDS, Hex & Wood Chisel Supplier, Riyadh KSA

• •Products: Tolsen 75448 SDS Plus Chisel 14 × 250 × 22 mm, Tolsen 75442 SDS Plus Flat Chisel 14 × 250 × 40 mm, Tolsen 75457 SDS Max Flat Chisel 18 × 400 × 25 mm, Tolsen 75451 Hex Flat Chisel 17 × 280 × 25 mm, Tolsen 75454 Hex Point Chisel 30 × 410 mm, Tolsen 25384 4 Pcs Wood Chisel Set, Heller SDS Max Chisel
• •Chisel Types: SDS-Plus chisels (14 × 250 mm, 22 and 40 mm tips), SDS-Max flat chisel (18 × 400 × 25 mm), industrial-grade hex flat and hex point chisels (17 mm and 30 mm shanks), and a 4-piece CrV wood chisel set in 6, 13, 19 and 25 mm.
• •Verified specifications: Chrome alloy and chrome alloy steel bodies, sand blasted finish; Tolsen 75454 confirmed compatible with Tolsen stock no. 79517 demolition hammer; carton quantities of 12, 30, 40 and 60 pcs.
• •Brands: TOLSEN and HELLER
• •Business type: Supplier
• •Location: Abi Ibn Kaab, Al Sinaiyah District, Riyadh - the capital's industrial supply quarter | Phone: +966 55 657 2342

Best for: Contractors and resellers who want to standardise a whole site kit on one accessory brand - seven distinct Tolsen chisel references across SDS-Plus, SDS-Max, hex and woodworking is the broadest single-brand chisel spread among KSA suppliers, and the manufacturer carton quantities suit buyers treating chisels as consumables rather than one-off purchases.

Dammam · Distributor · Genuine Makita Part Codes

Khusheim Store - Makita SDS-Max Cold Chisel & Bull Point Distributor, Dammam KSA

• •Products: Makita D 34475 Cold Chisel 25 × 600 mm, Makita D 34176 SDS Max Bull Point 300 mm, Makita A 80787 Bull Point 280 mm, Makita B 64238 Premium Chisel 250 mm
• •Chisel Types: A complete SDS-Max demolition sequence in one supplier - bull points to start the fracture (280 mm / 0.8 kg and 300 mm / 1 kg), a 600 mm cold chisel for deep-reach breaking, and a 250 mm / 0.235 kg premium chisel for interior masonry finishing.
• •Verified specifications: Makita codes 01-45-130, 01-26-009 and 01-47-204; controlled heat treatment on the D 34475; special tip geometry on the D 34176; no re-sharpening required on the B 64238; A 80787 adapted for all SDS-Max hammers.
• •Wider brand portfolio: Makita, RYOBI, HiKOKI, Kito, STABILA, HOMSET, Annovi Reverberi and others, plus procurement services, machine tools and engineering services, and maintenance and repair.
• •Business type: Distributor
• •Location: Al Muhammadiya, Dammam - inside the Dammam–Khobar–Jubail industrial corridor | Phone: +966 55 747 0030

Best for: Demolition contractors and plant maintenance teams running Makita SDS-Max hammers who need genuine, part-coded accessories with re-order traceability - distributor status rather than general resale is what makes this the safer route where counterfeit accessory stock is a concern, and the wider multi-brand catalogue lets a chisel order be consolidated with power tools and measuring equipment.

Riyadh · Verified Supplier · Hilti Ultimate & Premium Class

Toolx - HILTI Ultimate Chisel & Brick Bolster Supplier, Riyadh KSA

• •Products: HILTI TE CX FM Flat Chisel 15 mm Ultimate, HILTI TE Y SM Pointed Chisel 400 600 mm, HILTI TE SX Chisel Set Ultimate, HILTI TE Y SKHM Bushing Tool 250 mm Ultimate, Brick Bloster Chisel
• •Chisel Types: All three Hilti connection ends in one catalogue - TE-C (SDS-Plus) flat chisels, TE-Y (SDS-Max) pointed chisels, and a TE-S chisel set - plus a carbide-pin bushing tool for surface texturing and an entry-price 100 mm brick bolster for hand masonry.
• •Verified specifications: TE CX FM is 15 mm wide in 180 and 250 mm lengths, high-alloy steel with a self-sharpening cutting edge; TE Y SM in 400 and 600 mm with inductive hardening, supplied in 1, 5 and 10 pc packs; TE SX uses a wave design to minimise side contact and reduce jamming; Brick Bloster is model BC-100 with a 100 mm blade.
• •Brands: HILTI (Ultimate and Premium product classes), plus own-line masonry hand chisels
• •Business type: Verified Supplier - construction and industrial tools
• •Location: Al Aridh District, Riyadh | Phone: +966 54 844 0603

Best for: Contractors on continuous demolition and channelling programmes where downtime costs more than the chisel - the self-sharpening Ultimate class removes resharpening from the maintenance cycle entirely, and the 1, 5 and 10 pc pack structure lets a buyer trial a single unit before committing to crew quantities. Verified-supplier status matters here because premium Hilti accessories are a known target for counterfeit stock.

Al Jubail · ISO 9001 · SABIC, ARAMCO & NEOM Approved Potential Supplier

Techno Zone - Ingco, Crown & Beryllium Copper Chisel Supplier, Al Jubail KSA

• •Products: Chisel Hex 6 Point Be Cu, 350 mm, 903 g, Crown CPHHK CPA12 Pointed Cold Chisel 16 × 300 mm, Ingco Cold Chisel 19 × 16 × 305 mm, Sds Max Chisel 18 × 25 × 400 mm
• •Chisel Types: Beryllium copper non-sparking hex point for classified areas, hand-struck pointed and flat cold chisels for masonry and metalwork, and an unbranded SDS-Max flat chisel for volume demolition consumption.
• •Verified specifications: Be-Cu hex point at 350 mm and 903 g - the longest non-sparking chisel in this comparison; Ingco in 40Cr with heat treatment, limpid powder coating and new-style grip handle; Crown CPHHK CPA12 at 16 mm rod diameter, 300 mm long, pointed tip.
• •Certifications & approvals: States ISO 9001 certification and multiple authorisation certificates; authorised ESAB dealer in Saudi Arabia; Approved Potential Supplier status with SABIC and ARAMCO, and subsequently with NEOM.
• •Business type: Verified Supplier - industrial, welding and workshop equipment
• •Location: Jeddah Street, Al Jubail 31961 - inside the Kingdom's largest petrochemical hub | Phone: +966 3 362 0606 / +966 3 344 0404

Best for: Procurement teams whose chisel order has to clear a plant vendor-qualification process - the strongest certification and approvals record of any supplier on this page, already registered in the SABIC, ARAMCO and NEOM vendor systems that govern most large industrial purchasing in the Kingdom, and the only source here for a 350 mm beryllium copper hex point for refinery, gas and tank-farm shutdown work.

Riyadh · 4 Brands · Widest Chisel-Type Spread

Advanced Commercial Engines Company - Conan, EMTOP, WELLOO & DCA Chisel Supplier, Riyadh KSA

• •Products: Conan Concrete Chisel, Conan Cold Chisel, Conan SDS Chisel, EMTOP Wood Chisel 140 mm, WELLOO Wall Chisel, DCA SDS Hex Point Chisel 17 × 280 mm
• •Chisel Types: Concrete, cold, SDS, hex point and wood chisels plus a powered wall chasing machine - the only supplier here spanning hand chisels, machine accessories and a powered tool in one catalogue.
• •Verified specifications: Conan Cold Chisel in 16 and 18 mm blade widths at 250 and 300 mm lengths; Conan SDS Chisel with SDS shank; EMTOP EWCL1601 at 16 mm × 140 mm in Cr-V with double blister packaging; WELLOO Wall Chisel at 1,900 rpm/min; DCA hex point at 17 × 280 mm.
• •Brands: CONAN, EMTOP, WELLOO and DCA
• •Business type: Supplier - industrial, construction and workshop equipment
• •Location: Plumbing Market, Exit 14, Al Faisaliyyah, Riyadh - a trade-supply area convenient for MEP contractors | Phone: +966 50 497 5487

Best for: MEP and fit-out contractors who need the powered wall chaser, SDS chisels and wood chisels that map onto electrical and plumbing first-fix rather than heavy structural demolition - four brands under one account also lets a buyer compare value-tier options side by side instead of being locked to a single manufacturer's pricing.

Dammam · Manufacturer Since 2000 · Own Non-Sparking Brands

Kasweld - Non-Sparking, Masonry & Woodworking Chisel Manufacturer, Dammam KSA

• •Products: Non Sparking Flat Chisel, Non Sparking Point Chisel, 20 × 200mm, Non Sparking Hexagonal Flat Chisel, 14 × 150mm, Flat Chisel Alloy Steel, Masonry Chisel, Woodworking Chisel 10 To 38 mm, Turkey Ball Point Chisel
• •Chisel Types: Three non-sparking profiles in flat, hexagonal flat and point; conventional alloy steel flat chisels; a 300 × 18 mm masonry chisel; a 10–38 mm woodworking chisel range; and a ball point chisel for metal dressing and forming.
• •Verified specifications: Non Sparking Hexagonal Flat Chisel in high-strength aluminium bronze alloy at 14 × 150 mm with a hexagonal body for grip and control; Non Sparking Point Chisel at 20 × 200 mm manufactured specifically for the welding industry; Flat Chisel Alloy Steel in 254 and 304 mm; Masonry Chisel model 12120102 at 300 × 18 mm.
• •Own brands: KASWELD, SANPRO, SANCRAFT, SANWELD, KINSPERCO and STERWISE; publishes a dedicated certificates and quality assurance section and states its professional team receives training from industry experts.
• •Business type: Manufacturer, distributor, wholesaler and retailer - established 2000
• •Location: Aslam Bin Omaira, Al Amamrah, Dammam 31491 | Phone: +966 13 832 5799 / +966 50 058 4054 / +966 56 391 6054

Best for: Welding shops, fabrication companies and Eastern Province plants that need safe and standard chisels from one source - buying premium non-sparking tools only for the classified zones and cheaper alloy steel for the general workshop. As a manufacturer rather than a reseller, sizing and volume runs can be discussed directly with the source, and three contact lines give procurement multiple routes during urgent shutdown work.

Riyadh · Dedicated TOTAL Brand Store · Hand Guard Chisels

Total One Stop Tools Station - TOTAL Flat Cold Chisel Supplier, Riyadh KSA

• •Product: Total Flat Cold Chisel With Hand Guard 4 mm 16 mm THT4221026
• •Chisel Type: Flat Cold Chisel with an integrated moulded over-strike hand guard - the only guarded hand chisel listed among these KSA suppliers.
• •Verified specifications: Model THT4221026; head size 4 mm; handle size 16 mm; overall length 250 mm; material 45# carbon steel; packaging 36 pcs/carton.
• •Brand backing: TOTAL states its products are available across 110 countries with 2,500+ SKUs and an after-sales service network - relevant for parts and replacement continuity on repeat orders.
• •Business type: Supplier - dedicated single-brand TOTAL tools store
• •Location: Madinah Al Munawarah Road, Jiyad Street, Riyadh | Phone: +966 55 435 1524

Best for: Facilities and maintenance teams issuing chisels as controlled consumables across a large workforce - the moulded hand guard is the safety feature most often specified in that situation, the narrow 4 mm head suits precision work like splitting seized nuts and cutting rivet heads, and 36 pcs per carton is sized for multi-crew tool issue rather than single purchases.

Riyadh · WADFOW Brand Specialist · Widest Wood Blade

Wadfow Tools - Heavy Duty Wood Chisel Supplier, Riyadh KSA

• •Product: Heavy Duty Wood Chisel 38 mm
• •Chisel Type: Wide-blade Heavy Duty Wood Chisel for mallet-driven site carpentry - framing, wide rebates, housing joints, and door and floor fitting.
• •Verified specification: 38 mm (1-1/2 in) blade width - the widest single wood chisel blade among these KSA suppliers, against 25 mm as the top size in the Tolsen set and 16 mm on the EMTOP reference.
• •Brand: WADFOW - a hand-tool and power-tool portfolio spanning wood chisel and cold chisel lines in graduated widths
• •Business type: Supplier - construction and workshop tools
• •Location: Abi Al Hasan Al Wayidh, Al Faisaliyyah, Riyadh | Phone: +966 55 509 9215

Best for: Site carpentry crews and joinery workshops needing a wide blade that clears a housing or rebate in a single pass where a 25 mm chisel takes two - confirm the handle is strike-capped or impact-resistant when ordering, since a blade this wide is driven with a mallet rather than hand pressure.

How to Specify the Right Chisel for KSA Projects

How much does a chisel cost in Saudi Arabia?

Chisel price in KSA falls into four broad bands: SAR 15–70 for hand wood chisels, cold chisels and masonry chisels; SAR 18–160 for standard SDS-Plus and SDS-Max machine chisels; SAR 180–900 for premium branded chisels and chisel sets such as the Hilti Ultimate range; and SAR 220–750 for non-sparking aluminium bronze and beryllium copper safety chisels, where the alloy itself drives most of the cost. Carton quantities materially reduce unit price - request project pricing from the suppliers above.

What is the price of a 100mm chisel?

A 100 mm figure in chisels almost always means blade width, and that means a bolster - the Brick Bloster Chisel BC-100 is the reference in this range, indicatively SAR 25–60. If 100 mm refers to overall length, that is shorter than anything stocked here; the nearest options are the Non Sparking Hexagonal Flat Chisel at 150 mm and the EMTOP Wood Chisel at 140 mm, from around SAR 15 for the wood chisel. Always confirm whether the dimension is blade width or overall length when requesting a quote - the two lead to entirely different products.

What are the four types of chisels?

The four broadest categories are wood chisels for joinery and carpentry, cold chisels for cutting and shaping metal, masonry and concrete chisels for brick, block, stone and concrete, and machine chisels with SDS-Plus, SDS-Max, TE-S or hex shanks for rotary and demolition hammers. Within those, the profiles stocked by KSA suppliers include Flat Chisel, Point Chisel, Bolster Chisel and Cape / Cross-Cut Chisel, plus specialist bushing tools for concrete surface texturing.

SDS-Plus vs SDS-Max chisel - what's the difference?

SDS-Plus uses a 10 mm shank and fits rotary hammers, with chisels typically around 250 mm long - suited to chasing, tile removal and light chipping. SDS-Max uses an 18 mm shank and fits demolition hammers, with chisels from 250 mm to 600 mm - suited to slab breaking and structural concrete removal. They are not interchangeable, and forcing an adapter transfers impact energy poorly and destroys the chuck. Confirm the chuck on the machine, not the description on the chisel, before ordering.

Which country makes the best chisels?

Origin matters less than material, hardening process and intended application. Among ranges available in Saudi Arabia, Liechtenstein-headquartered Hilti and German specialist Heller represent the European premium tier for machine chisels, Japanese Makita is widely used for SDS-Max demolition accessories, and Saudi manufacturer Kasweld produces non-sparking safety chisels locally in Dammam. Tolsen, Ingco, TOTAL, Crown, Conan, DCA, EMTOP and Wadfow cover the value and mid tiers. For a chisel consumed weekly on site, a mid-tier 40Cr or chrome alloy tool often gives better value than a premium one.

Which chisel material should I specify?

Cr-V (chrome vanadium) for wood chisels because it holds an edge longer between sharpenings; 40Cr or heat-treated chrome alloy for cold and masonry chisels so the edge resists rolling under hammer blows; high-alloy steel with inductive hardening for premium machine chisels used continuously; 45# carbon steel for economical general-purpose hand chisels; and aluminium bronze or beryllium copper wherever a flammable atmosphere makes a non-sparking tool mandatory.

Do I need non-sparking chisels for a refinery or gas plant in Saudi Arabia?

In any classified hazardous area, yes - a steel chisel struck against metal can generate a spark capable of igniting a flammable atmosphere, and most plant permit systems prohibit steel striking tools in those zones. Aluminium bronze covers most chipping and cutting duties; beryllium copper adds non-magnetic and corrosion-resistant properties for work near instrumentation and in coastal or offshore conditions. Order these at shutdown planning stage, not at mobilisation - they are a specialist item, not a shelf stock substitute.

What is the HSN / HS code for chisels in Saudi Arabia?

Chisels split across three headings. HS 8205.30 covers planes, chisels, gouges and similar cutting tools for working wood. Hand-struck cold, masonry and bolster chisels sit in heading 8205, generally under 8205.59 for other hand tools. SDS and hex machine chisels are interchangeable tools for hand tools and are excluded from 8205 - they fall in heading 8207, commonly 8207.19 or 8207.90. Saudi Customs applies these through the GCC Common Customs Tariff's extended national coding, so confirm the full national code with your supplier or customs broker before shipment.

Where can I find chisel suppliers near me in Saudi Arabia?

For Riyadh buyers: Al Darb Al Hadidi Limited Company (Al Sinaiyah District), Toolx (Al Aridh District), Advanced Commercial Engines Company (Al Faisaliyyah), Total One Stop Tools Station (Madinah Al Munawarah Road) and Wadfow Tools (Al Faisaliyyah). For the Eastern Province: Khusheim Store and Kasweld in Dammam, and Techno Zone in Al Jubail. Delivery arrangements beyond each supplier's home city vary by order, so confirm dispatch terms when requesting a quotation.

Do chisels carry a warranty in KSA?

Chisels are wear consumables, so cover is normally against manufacturing defect rather than a use-period warranty - a worn or mushroomed chisel is expected, a cracked or improperly hardened one is not. Premium ranges back this with process credentials rather than a time period: Hilti cites ISO certified production processes and more than 30 years of chisel design and manufacturing expertise, Techno Zone states ISO 9001 certification, and Kasweld publishes a certificates and quality assurance section. Confirm the specific defect-return terms with each supplier at the point of order.