Angle Grinder Suppliers in KSA | Corded, Cordless & Air Angle Grinders

Angle Grinder Suppliers in KSA | Cordless Polishers & Cutting Tools

Find verified angle grinder suppliers in Saudi Arabia offering corded, cordless and pneumatic angle grinders in 4-inch, 4.5-inch, 5-inch, 7-inch and 9-inch disc sizes for metal cutting, grinding, deburring, weld removal and stone or tile cutting. Compare heavy-duty and industrial angle grinders from leading brands including Makita, Bosch Professional, DeWalt, Toku, Stanley, TOLSEN, WURTH, WADFOW, Makute, Somafix and INGCO, suitable for construction, fabrication, automotive repair and general workshop use. Browse product specifications, motor power, no-load speed, disc diameter, switch type, supplier contact details and fast delivery options across Riyadh, Jeddah, Dammam and Jubail.

Verified Angle Grinder Suppliers in Saudi Arabia - Riyadh & Nationwide Suppliers

Which Angle Grinder Power Source & Disc Size Do You Actually Need?

Three power sources and six common disc sizes cover almost every cutting, grinding and finishing job. Match your task to one:

• Corded Electric: best for continuous heavy-duty cutting and grinding at the workshop or on-site where power is available. Available from 100 mm up to 230 mm disc sizes.
• Cordless / Battery-Powered: ideal for portable jobs, confined areas and sites without a power outlet. Common voltages include 18V, 20V, 36V and 48V.
• Pneumatic / Air: used in industrial plants, shipyards and oil & gas facilities already running compressed-air lines, offering high free speeds and continuous-duty operation without motor overheating.

Types of Angle Grinders Available in Saudi Arabia — Specifications, Models, Suppliers & Prices

Angle grinders are classified by power source, frame size, motor construction and switch type. Each type below sets out its technical specification, the models stocked in the Kingdom, the suppliers carrying them and indicative price ranges in Saudi Riyals.

Corded Electric Angle Grinders for Continuous Metal Cutting, Weld Removal & Stone Cutting

• Technical Specification: Mains-powered 220–240V / 50 Hz; 840W–2,600W; M14 or M10 spindle; 22.23 mm wheel bore; 6,600–12,000 RPM depending on disc size; brushed field motors with replaceable carbon brushes.
• Disc Sizes: 100 mm, 115 mm, 125 mm, 150 mm, 180 mm and 230 mm.
• Selection Notes: Match wattage to disc size — a 115 mm disc on an under-powered motor will stall and glaze the wheel, while a 230 mm disc needs 2,000W or more to hold speed in the cut. Check that supply cabling and site breakers can carry the inrush current when several units run together.
• Models Available: Makita 4 inch 840W; Makita 5 inch 1100W; Bosch GWS 2200-180 HV; Stanley 2000W 230mm; TOTAL 960W 115mm; DEWALT DWE4237; Makute 1400W; Higher 2600W.
• Suppliers: Al Darb Al Hadidi Limited Company; Kon Pumps Trading Company; Musaed Aizah Omar Al Saiari Trading EST.; Wadfow Tools.
• Price Range: SAR 150–1,100 depending on wattage and disc size.

Cordless / Battery-Powered Angle Grinders for Portable Site, Scaffolding & Confined-Space Work

• Technical Specification: Lithium-ion platforms in three classes — 12V compact, 18V/20V general-purpose and 36V/40V/48V high-power; electronic speed regulation holds RPM until pack cut-off; battery management with over-current, over-discharge and thermal protection.
• Disc Sizes: Mostly 100 mm and 115 mm; some 125 mm on 36V and above.
• Runtime & Ownership: Cutting draws far more current than grinding, so rate packs by amp-hours rather than voltage alone and budget for a second battery on charge. Staying on one manufacturer battery platform lets a single charger serve drills, drivers and grinders across the crew.
• Models Available: WEMART 36V; AOTUO 48V; TUOTUO 4-1/2 inch; INGCO 20V; Somafix Brushless 115 mm; WADFOW Cordless 4.5 kg.
• Suppliers: Adel Mohammed Al Olayan Trading Establishment; Musaed Aizah Omar Al Saiari Trading EST.; Wadfow Tools.
• Price Range: SAR 200–900, usually excluding spare batteries and chargers.

Pneumatic / Air Angle Grinders for Shift-Length Grinding in Oil & Gas Plants, Shipyards & Fabrication Yards

• Technical Specification: Vane-type air motor running at 6.3 bar typical working pressure; free speeds 7,500–13,000 RPM; exhaust air cools the motor, so there is no thermal overload on continuous duty; no electrical arc and no windings to burn out.
• Disc Sizes: 100 mm, 115 mm, 125 mm and 180 mm.
• Air Supply Requirements: Free speed drops quickly if line pressure or hose bore is inadequate — size the compressor for the tool CFM at 6.3 bar and keep hose runs short. An inline filter-regulator-lubricator protects the vane motor from moisture and particulate, which is the main cause of premature air-tool failure.
• Models Available: Toku TAG-40FRH 4 inch 13,000 RPM; Toku 7 inch 7,500 RPM; WADFOW Air Angle Grinder 1.3 kg; Pneumatic Air Angle Grinder 4.5 inch.
• Suppliers: Amer Bin Farhan Al Subaie Al Anzi Trading Establishment; Wadfow Tools.
• Price Range: SAR 350–1,200, excluding hose, fittings and compressor capacity.

Small / Compact Angle Grinders for Deburring, Tile Cutting & Tight-Access Repair Work

• Technical Specification: 75–115 mm discs, roughly 1.8–2.5 kg, 700W–1,200W; slim barrel bodies sized for one-hand use; low reaction mass reduces kickback risk overhead.
• Handling Advantage: Sub-2 kg tools can be held above shoulder height for far longer before fatigue sets in, and the lower rotating mass makes controlled, incremental material removal easier on visible or finished surfaces.
• Models Available: Mini Angle Grinder 125mm 1.82 kg; CATERPILLAR CAT DX3091.1 115 mm; DEWALT 4.5 inch 1200W; WURTH EWS 10-115 CLASSIC 2.3 kg.
• Suppliers: Rasel Al Haram Trading Establishment; Wadfow Tools.
• Price Range: SAR 150–450.

Heavy-Duty Angle Grinders for Structural Steel, Heavy Rebar & Concrete Cutting

• Technical Specification: 180 mm and 230 mm discs; 2,000W–2,600W; 6,500–8,500 RPM deliberately geared down so large-disc peripheral speed stays inside the 80 m/s wheel rating; M14 spindle; 5–5.3 kg; cast-metal gearbox housings for heat dissipation.
• Cut Capacity: A 230 mm disc gives roughly 68 mm of cut depth against about 28 mm for a 115 mm disc, which is what makes it the only practical choice on beams, channel and thick plate.
• Safety & Handling: Two-handed operation with the side handle fitted is mandatory — reaction torque on a jammed 230 mm wheel is enough to wrench the tool from an unsupported grip. Never fit a disc rated below the tool no-load speed, and keep the guard between the wheel and the operator at all times.
• Models Available: Makita M0921B 9 inch 2,200W; Makita 7 inch 2,200W; Bosch GWS 2200-180 HV; Stanley 2000W 230mm; Higher 2600W; Tolsen 79725.
• Suppliers: Al Darb Al Hadidi Limited Company; Kon Pumps Trading Company; Wadfow Tools; Musaed Aizah Omar Al Saiari Trading EST..
• Price Range: SAR 400–1,200.

Brushless Angle Grinders for Professional Daily Cordless Cutting, Polishing & Sheet-Metal Work

• Technical Specification: Electronically commutated motor with no carbon brushes; lower heat loss means more pack energy reaches the disc and longer runtime per charge; commonly multi-speed, for example 3,500 / 6,000 / 8,500 RPM selectable.
• Cost of Ownership: Higher purchase price is offset by no brush replacement interval, fewer service stoppages and more cuts per charge — the gap usually pays back within a year on tools used daily.
• Speed Control: Selectable speeds matter more than raw power on mixed work: low settings suit wire brushing, polishing and thin sheet where high RPM burns or distorts the material.
• Models Available: Somafix Brushless Cordless 115 mm; INGCO 20V brushless variants.
• Suppliers: Musaed Aizah Omar Al Saiari Trading EST.; Adel Mohammed Al Olayan Trading Establishment.
• Price Range: SAR 350–900.

Brushed Angle Grinders for General Workshop Grinding & Low-Cost Fleet Issue

• Technical Specification: Conventional carbon-brush field motor; brushes are consumable wear parts, and on models such as the Makita 7 inch they are externally accessible for on-site replacement; lower purchase price and widely available spares.
• Serviceability: A worn brush is a minutes-long field change rather than a workshop repair, and replacement brushes cost a fraction of a service call — the reason brushed tools still dominate site fleets where units get shared, dropped and heavily used.
• Models Available: Makita 4 inch 840W; TOTAL 960W 115mm; Makute 1400W; Tolsen 79725; DEWALT 4.5 inch 1200W.
• Suppliers: Al Darb Al Hadidi Limited Company; Kon Pumps Trading Company; Musaed Aizah Omar Al Saiari Trading EST..
• Price Range: SAR 150–600.

Paddle-Switch / Dead-Man-Switch Angle Grinders for Overhead, Scaffolding & Safety-Controlled Sites

• Technical Specification: The tool runs only while the paddle lever is held against the body; releasing it — or dropping the tool — cuts power immediately; a lock-off catch prevents accidental start-up.
• Safety Rationale: This is the switch type most site safety policies specify, because a dropped tool stops itself instead of running loose on the deck or at the end of a cable. It also prevents restart if the tool is set down while still switched on.
• Models Available: Makita 4 inch 840W (ergonomic paddle with lock-off); Makita 5 inch 1100W SJSII.
• Suppliers: Al Darb Al Hadidi Limited Company.
• Price Range: SAR 180–450.

Slide-Switch Angle Grinders for Long Surface-Preparation Runs & Large-Disc Cutting

• Technical Specification: A sliding ON/OFF switch latches in the run position, allowing continuous operation without constant hand pressure; better models use a two-step safety slide requiring two deliberate actions to start.
• Operator Comfort: On grinding passes measured in minutes rather than seconds, a latching switch removes the constant grip force a paddle demands, which reduces hand fatigue and lets the operator concentrate on disc angle and pressure.
• Safety Note: Because the tool stays live when set down, it must be allowed to stop fully before being released, and the two-step start is worth insisting on to prevent a knocked switch firing the tool.
• Models Available: Stanley 2000W 230mm (two-step safety switch); DeWalt DW802G; Bosch GWS 2200-180 HV.
• Suppliers: Kon Pumps Trading Company; Wadfow Tools.
• Price Range: SAR 300–950.

Angle Grinder Disc Sizes — Specification and Price Guide

• 100 mm / 4 inch: 840W–1,000W at up to 11,000–13,000 RPM; 16 mm or 22.23 mm bore. Thin steel, bolts, tiles and tight spaces. SAR 150–350.
• 115 mm / 4.5 inch: 960W–1,200W at approx. 11,000 RPM; M14 spindle, 22.23 mm bore. The general workshop and site standard. SAR 180–450.
• 125 mm / 5 inch: 1,100W–1,400W at 11,000–12,000 RPM. More cut depth than 115 mm while still one-hand controllable. SAR 250–550.
• 150 mm / 6 inch: 1,400W–1,800W at approx. 9,000 RPM. Medium-duty grinding and surface preparation. SAR 350–700.
• 180 mm / 7 inch: 2,200W at approx. 8,500 RPM; two-handed. Heavy metal cutting and weld removal on thick section. SAR 500–950.
• 230 mm / 9 inch: 2,000W–2,600W at 6,500–6,600 RPM; approx. 68 mm cut depth. Large-scale industrial cutting and demolition. SAR 650–1,200.

Prices are indicative retail ranges in Saudi Arabia and vary with brand, motor rating, warranty and order quantity. Bulk and project pricing is available from the suppliers listed above across Riyadh, Jeddah, Dammam and Jubail.

Popular Angle Grinder Products Available in Saudi Arabia

Angle Grinders for Metal Cutting, Grinding & Deburring in Saudi Arabia

Suited to steel fabricators, welding shops and maintenance teams cutting steel bars, pipes, sheets and profiles, removing excess metal and deburring sharp edges from cut components.

Bosch GWS 2200-180 HV Professional

• Rated Power: 2,200W | No-Load Speed: 6,500–8,500 RPM | Spindle Thread: M14 | Disc Diameter: 230 mm | Weight: 5 kg.
• Straight main handle and high-voltage motor deliver consistent power for continuous metal cutting and deburring runs.
• Multi-application build suits fabrication shops running large-diameter cutting and grinding wheels back to back.

Available From: Kon Pumps Trading Company — +966 57 850 0919

Makita Angle Grinder 7 inch

• Power: 2,200W | No-Load Speed: 8,500 RPM | Disc Diameter: 7 inch / 180 mm | Handle: Rubberized, Three-Position Adjustable.
• Externally accessible brushes and machined bevel gear support long service life under heavy cutting loads.
• Increased heat resistance and a superior anti-dust structure suit dusty steel-fabrication environments.

Available From: Al Darb Al Hadidi Limited Company — +966 55 657 2342

Angle Grinders for Weld Removal & Surface Preparation Work

Built for welding shops and industrial maintenance crews removing unwanted welds, leveling weld joints and preparing surfaces before painting or coating.

Toku Air Angle Grinder, 7 inch, 7500rpm

• Type: Pneumatic / Air | Wheel Size: 180 x 8 x 22 mm | Free Speed: 7,500 RPM | Net Weight: 3.1 kg | Air Consumption: 0.8–1.0 m³/min.
• Compressed-air power avoids motor overheating during long weld-removal and rust-stripping passes.
• Lightweight build with high wheel max speed suits repetitive surface-prep tasks in industrial plants.

Available From: Amer Bin Farhan Al Subaie Al Anzi Trading Establishment — +966 58 171 6349

Stanley 2000W 230MM Large Angle Grinder

• Power: 2,000W | Disc Diameter: 230 mm | Safety: Two-Step Safety Switch, Spindle Lock, Multi-Angle Rotation Gearbox.
• Spindle lock enables quick disc changes between weld-removal and finishing passes without extra downtime.
• Multi-angle rotation gearbox keeps the tool balanced for both flat surface grinding and edge work.

Available From: Kon Pumps Trading Company — +966 57 850 0919

Angle Grinders for Concrete, Masonry & Tile Cutting on Construction Sites

Suited to contractors and site crews cutting concrete blocks, bricks, tiles and masonry, and chasing channels in masonry with suitable discs.

Higher Angle Grinder 2600 W

• Power: 2,600W | Type: Heavy-Duty Corded | Disc Diameter: 180–230 mm compatible.
• High wattage delivers the sustained torque needed to cut through concrete blocks and masonry without stalling.
• Suited to general construction cutting and grinding tasks alongside pipe and structural steel fabrication work.

Available From: Wadfow Tools — +966 55 509 9215

Makute Angle Grinder 1400 W

• Power: 1,400W | Grade: Industrial | Frequency: 50/60 Hz | Warranty: 1 Year.
• Industrial-grade build sized for daily use on active construction sites cutting tile, brick and masonry.
• Dual 50/60 Hz frequency compatibility supports use with different generator and site power setups.

Available From: Musaed Aizah Omar Al Saiari Trading EST. — +966 57 030 9717

Angle Grinders for Stone & Tile Cutting, Trimming and Polishing

Designed for stone masons, tile installers and finishing contractors cutting ceramic, porcelain and natural stone, then polishing and restoring the finished surface.

WADFOW Air Angle Grinder

• Type: Pneumatic / Air | Disc Diameter: 125 mm | Weight: 1.3 kg | Operating Pressure: 6.3 bar.
• Lightweight air-powered build reduces operator fatigue during extended tile and stone trimming sessions.
• Consistent air-driven speed supports smooth, controlled cuts on brittle stone and ceramic surfaces.

Available From: Amer Bin Farhan Al Subaie Al Anzi Trading Establishment — +966 58 171 6349

DEWALT DWE4237 5 inch Angle Grinder

• Model: DWE4237 | Brand: DeWalt | Disc Diameter: 5 inch / 125 mm.
• Mid-size disc diameter balances cutting power with control on stone edges and tile-trimming detail work.
• Compatible with diamond cutting blades and polishing attachments for a progressive stone-finishing workflow.

Available From: Rasel Al Haram Trading Establishment — +966 50 728 1695

Cordless & Compact Angle Grinders for Automotive Repair & Site Maintenance

Suited to automotive workshops and mobile maintenance teams cutting exhaust pipes, removing rusted bolts and components, and preparing bodywork and metal for finishing.

Somafix Brushless Cordless Angle Grinder 115 mm

• Battery Type: Lithium-Ion | No-Load Speed: 3,500 / 6,000 / 8,500 RPM | Wheel Diameter: 115 mm.
• Brushless motor extends battery runtime and reduces maintenance compared to brushed cordless grinders.
• Three-speed setting allows the operator to match RPM to exhaust-pipe cutting or light body-panel grinding.

Available From: Musaed Aizah Omar Al Saiari Trading EST. — +966 57 030 9717

TUOTUO Cordless Angle Grinder 4-1/2 inch

• Disc Diameter: 4-1/2 inch / 115 mm | Type: Cordless.
• Compact frame suits working under vehicles and in engine bays where cord access is limited.
• Portable format is well matched to removing rusted bolts and components during mobile roadside repair jobs.

Available From: Adel Mohammed Al Olayan Trading Establishment — +966 11 404 3692

How to Choose the Right Angle Grinder for Your Application

Matching the tool to the job avoids overpaying for capacity you don't need, or underpowering a task that needs a heavier machine. Work through these points before contacting a supplier:

• Disc size: 100–125 mm grinders suit light metalwork and automotive tasks; 180–230 mm large angle grinders handle concrete cutting, structural steel and heavy fabrication.
• Power source: choose corded for continuous heavy-duty use with mains access, cordless for portability and confined spaces, and pneumatic/air where a compressed-air line is already in place.
• Motor power & RPM: higher wattage (1,800–2,600W) and higher no-load speed remove material faster on steel and concrete; lower-power models suit finishing, polishing and light sanding.
• Switch type: paddle/dead-man switches stop the disc the moment pressure is released for added safety; slide switches allow continuous operation on long production runs.
• Motor type: brushless motors run cooler, last longer and suit heavy daily use; brushed motors are generally lower-cost for occasional or light-duty work.
• Safety features: look for spindle lock for fast disc changes, adjustable guards, anti-restart protection and vibration-absorbing grips on any grinder used for extended periods.

Angle Grinder Brand Comparison

Frequently Asked Questions

Related Power Tools

• Power Grinder — Bench, die and straight grinders for shaping, polishing and precision material removal.
• Impact Wrench — High-torque tools for fastening and removing bolts and nuts on metal and automotive work.
• Power Drill — Corded and cordless drills for drilling and driving fasteners on-site and in the workshop.
• Rotary Hammer — Heavy-duty hammer drills for drilling into concrete, masonry and stone.
• Demolition Hammer — Breaker hammers for concrete demolition and heavy chiseling work.
• Power Saw — Circular and reciprocating saws for cutting wood, metal and composite materials.
• Power Sander — Orbital and belt sanders for surface finishing on wood and metal.
• Impact Driver — Compact high-torque drivers for fast fastening on construction and fabrication sites.
• Heat Gun — Hot-air tools for paint stripping, shrink-wrapping and surface preparation.