Heat Exchanger Suppliers in KSA | Shell & Tube, Plate, Coil & Air Cooled Heat Exchangers in Saudi Arabia
Looking for Heat Exchanger Suppliers in KSA? This guide connects you with verified suppliers of heat transfer equipment across Riyadh, covering Heat Exchanger types from Shell Tube Heat Exchanger and Double-Pipe Heat Exchanger through to Plate Heat Exchanger and Coil Heat Exchanger designs. As leading heat exchanger manufactures in Saudi Arabia and Heat Exchanger Manufacturers in Saudi Arabia, the suppliers below stock KSB mechanical seal cooling exchangers and the full FUNKE brand range — alfa laval heat exchanger is referenced in search terms but is not a brand named in this source’s catalogue, see the FAQ for the closest stocked equivalents.
This page also covers Pressure Vessel Heat Exchanger in Saudi Arabia, Finned Tube Heat Exchangers Manufacturer and Supplier in Saudi Arabia, Coil Heat Exchanger Manufacturer in Saudi Arabia, refinery heat exchanger and industrial heat exchanger shell and coil heat exchanger enquiries, with Air Cooled Heat Exchanger Manufacturer in Saudi Arabia and Plate Heat Exchanger Manufacturers In Saudi Arabia searches answered against the actual products stocked below. Coverage includes a Heat exchanger suppliers in ksa khobar reference in the FAQ, plus Heat Exchanger Working Principle and Heat Exchanger Sheel [Shell] and Tube explanations to help you specify the right unit.
Find Heat Exchanger Suppliers in Saudi
Heat Exchanger Working Principle
A heat exchanger is designed to transfer heat between two or more fluids, liquids, vapors, or gases of different temperatures without mixing them. Depending on the type employed, the heat-transferring process can be gas-to-gas, liquid-to-gas, or liquid-to-liquid, occurring through a solid separator (indirect contact, the most common design) or, in some designs, by direct fluid contact. In a shell-and-tube design specifically, one medium flows through the shell chamber while the second flows through the tube chamber; baffles control the shell-side flow to maximize crossflow across the tubes for efficient heat transfer.
Before Choosing a Heat Exchanger
✓ Type & Construction: Shell & tube suits high pressure/temperature process duties, plate exchangers suit compact hot water and industrial heating with easy cleaning, double-pipe suits smaller high-temperature duties, coil/calorifier types suit indirect water heating, and air cooled units suit sites without a ready cooling water supply.
✓ Tube Bundle Design: A fixed tube bundle is simpler and cheaper but harder to inspect/clean internally; a removable (floating head) tube bundle costs more but allows full mechanical cleaning and inspection — important for fouling-prone or contaminated process media.
✓ Pass Configuration: Single-pass designs suit gas-side or exhaust routing where the medium must flow straight through; two-pass and multi-pass (up to four-pass) designs increase flow velocity and heat transfer surface within the same shell length, at the cost of higher pressure drop.
✓ Working Pressure & Temperature: Confirm both the cooling circuit and process circuit temperature range and the maximum working pressure — ranges stocked here run from roughly 10 bar up to 120 bar, and from -29°C up to 500°C depending on the model, so match the unit to your actual process envelope, not just the nominal duty.
✓ Standards & Certification: For mechanical seal cooling duty, confirm compliance with API 682 (4th Edition); for pressure equipment generally, confirm against the Pressure Equipment Directive (PED), AD-2000, ASME-VIII Div I/II, TEMA standard, API 614/618/660 or China-SQL depending on the destination and regulatory requirement of the project.
✓ Safety Requirements: Where cross-contamination between the two media would be hazardous, specify a double-wall/safety-space design (such as a three-chamber SWF/SWP-style unit) with a barrier fluid and pressure-monitored leak detection rather than a standard single-wall tube bundle.
✓ Application: Hot Water Heating Systems, Industrial Process Heating, Oil & Gas Processing, Steam & Condensate Systems, HVAC & Chilled Water Systems, Chemical Processing Plants, Food & Beverage Processing.
✓ Buyer’s Tip: Don’t specify by exchanger surface area alone — the baffle spacing (narrow "O" version vs wide "W" version) and tube-side pass count matter just as much for actual thermal performance against your specific fluid viscosity and required pressure drop.
Buy Shell & Tube, Plate, Coil & Air Cooled Heat Exchangers From KSA Suppliers
Match Your Job to the Right Heat Exchanger
| If You Need… | You Need a… | Available From |
|---|---|---|
| A cooler for a KSB pump’s mechanical seal circulation | Heat Exchanger 16 l, 10–50 Bar (KSB API 682 seal cooler) | KSB Pumps Arabia Limited – +966 11 227 7060 |
| A high-pressure seal cooler up to 120 bar | Heat Exchanger 20 To 120 Bar, 1 l | KSB Pumps Arabia Limited – +966 11 227 7060 |
| A general-purpose removable tube bundle cooler | Funke C 500 / C 400 / C 100 Universal Cooler | AES Arabia LTD – +966 11 4772398 |
| A gas cooler for process gas piping | Funke CCFA Gas Cooling Quality Heat Exchanger, 230°C | Atlantic Supplies Trading – +966 11 210 6088 |
| A modular, standardized economical cooler | Funke CPS Standard Quality Heat Exchanger, 110°C | Atlantic Supplies Trading – +966 11 210 6088 |
| A double-wall safety exchanger to prevent media mixing | Funke SWF/SWP Safety Quality Heat Exchanger, 150°C | Ruhaily – +966 57 651 8551 |
| An exhaust gas cooler for high inlet temperatures | Funke WRA 200 Exhaust Gas Quality Heat Exchanger, 150°C | Ruhaily – +966 57 651 8551 |
| A high-temperature shell and tube exchanger | Funke TDW Quality Shell And Tube Heat Exchanger, 500°C | Ruhaily – +966 57 651 8551 |
| A poultry/swine facility heat recovery system | Heat X Rotate Munters | Alka Boiler – +966 11 472 1323 |
| An indirect-fired calorifier for a hot water system | Storage And Non Storage Type Calorifiers Heat Exchangers | Alka Boiler – +966 11 472 1323 |
Verified Heat Exchanger Suppliers in KSA – Riyadh Suppliers
KSB Pumps Arabia Limited — KSB Mechanical Seal Cooling Heat Exchanger Supplier in Riyadh
RIYADH · 2nd Industrial City · KSB pump seal cooler manufacturer · API 682-compliant seal cooling heat exchangers
Phone: +966 11 227 7060 | Address: 2nd Industrial City, Riyadh, KSA
Heat Exchanger Products They Offer
- Heat Exchanger 16 l, 10–50 Bar — Working Pressure: 10 – 50 Bar | Cooling Water Volume: 16 l | Process Fluid Volume: 0.4 l | Cooling Circuit Temperature: −29 to +100°C | Process Circuit Temperature: −29 to +200°C Compliant with API 682, 4th Edition, for single or double mechanical seals (Arrangements 1, 2 or 3); circulation between the cooler and the KSB mechanical seal is ensured via an integrated circulation device, with a throttling bush largely isolating the cooled fluid in the seal chamber from the hot pumped fluid.
- Heat Exchanger 4 m — Material: Carbon Steel Grade ASTM A36 | Pipe: 12″ Sch 40 | Circulation Pipe: 2″ Sch 80 A tube-in-tube design for cooling single and double mechanical seals, frequently used for hot water and boiler feed water as well as hydrocarbons requiring cooling to prevent evaporation at the mechanical seal.
- Heat Exchanger 20 To 120 Bar, 1 l — Item Code: 19IQR1 | Working Pressure: 20 – 120 Bar | Cooling Water Volume: 1 l | Process Fluid Volume: 0.5 l | Cooling Circuit Temperature: −29 to +100°C | Process Circuit Temperature: −29 to +270°C.
Price Range
SAR 1,500–5,000+ / unit for the 16 l, 10–50 bar seal cooler, depending on configuration | SAR 2,000–6,000+ / unit for the 20–120 bar, 1 l high-pressure cooler | Contact directly for the 4 m tube-in-tube cooler, priced by pipe schedule and length
Why Choose KSB Pumps Arabia Limited
- Manufacturer Depth: Produces seal cooling heat exchangers specifically engineered around the KSB mechanical seal, integrating a circulation device and throttling bush directly matched to KSB pump seals.
- Certification: Products are compliant with API 682, 4th Edition, for single or double mechanical seal arrangements (Arrangements 1, 2 or 3).
- Coverage Area: Based in the 2nd Industrial City, Riyadh.
- Contact: Single landline order line — +966 11 227 7060.
- Industries Served: Oil & Gas, Petrochemical, Boiler Feed Water, Pump Seal Cooling.
- Note: The strongest first call on this page for a Pressure Vessel Heat Exchanger for pump mechanical seal cooling, or any API 682-compliant seal cooler enquiry.
AES Arabia LTD — FUNKE Universal Cooler (C-Series) Heat Exchanger Supplier in Riyadh
RIYADH · Intersection of Alhasa and Jarir Street, Al Malaz District · FUNKE C-series universal cooler stockist
Phone: +966 11 477 2398 | Address: Intersection of Alhasa and Jarir Street, Al Malaz District, Riyadh, KSA
Heat Exchanger Products They Offer
- Funke C 500 Universal Cooler Quality Heat Exchanger — Brand: FUNKE | Design: Removable tube bundle, floating head Straight internal tubes with a maximum-surface floating-head design, primarily used in chemical and petrochemical industries and vacuum engineering as a process gas cooler, oil cooler or condenser/vacuum condenser; certifiable to PED, AD-2000, ASME-VIII Div I/II, U-Stamp, TEMA and API 614/618/660.
- Funke C 400 Universal Cooler Quality Heat Exchanger — Brand: FUNKE | Design: Removable tube bundle, floating head, side inspection cover Tube bundle removable without disassembling the guide chamber; used where a higher sealing quality is required relative to operating media, pressure and temperature; certifiable to PED, AD-2000, ASME-VIII Div I, U-Stamp and TEMA.
- Funke C 100 Universal Cooler Quality Heat Exchanger, 320°C — Brand: FUNKE | Model: C 200 | Maximum Temperature: 320°C | Design: Removable tube bundle, gland-packing ring-stuffing box gland The movable tubesheet floats within the shell space and seals against atmosphere; available in single-pass or multi-pass tube-side configurations.
Price Range
Contact directly for the C 500, C 400 and C 100 Universal Cooler range, since FUNKE units are engineered/quoted per project specification (exchange surface, shell diameter and pass configuration)
Why Choose AES Arabia LTD
- Brand Range: Stocks the FUNKE C-series (C 500, C 400, C 100) removable tube bundle universal coolers, all built around a floating-head design for a maximum heat exchange surface.
- Application Fit: The C-series is primarily used in chemical and petrochemical industries and vacuum engineering, as a process gas cooler, oil cooler or condenser.
- Coverage Area: Based at the intersection of Alhasa and Jarir Street, Al Malaz District, Riyadh.
- Contact: Single landline order line — +966 11 4772398.
- Industries Served: Chemical Processing, Petrochemical, Vacuum Engineering.
- Note: A strong first call for refinery heat exchanger and Heat Exchanger For Chemical Processing Plants enquiries, given the FUNKE C-series’ petrochemical focus.
Atlantic Supplies Trading — FUNKE Gas Cooling & Standard-Series Heat Exchanger Supplier in Riyadh
RIYADH · Office No. 210, Al Waha Square, Othman Bin Affan · FUNKE BCF, CCFA and CPS series stockist
Phone: +966 11 210 6088 | Address: Office No. 210, Al Waha Square, Othman Bin Affan, Riyadh, KSA
Heat Exchanger Products They Offer
- Funke BCF P Universal Quality Heat Exchanger, 150°C — Brand: FUNKE | Model Series: BCF/BCP (P = removable tube bundle) Modular system construction with exchange surfaces from 0.11 m² to 114.5 m² across 110 graduated sizes; O-version (narrow baffle spacing) suits thin liquids, W-version (wide baffle spacing) suits viscid media; frequently used as a fluid cooler for oil, water or other operating fluids.
- Funke CCFA Gas Cooling Quality Heat Exchanger, 230°C — Brand: FUNKE | Design: Fixed tube bundle, tube-side single-pass A further development of the BCF series specifically for gas cooling (SSCFA in stainless steel); gas flows through the tubes so it integrates easily into gas pipework, with cooling water routed counter-flow on the shell side.
- Funke CPS Standard Quality Heat Exchanger, 110°C — Brand: FUNKE | Model Basis: TEMA type BEW | Exchange Surface Range: 0.47 m² to 104.02 m² A standardized model series offering an economical price/performance ratio; removable tube bundle with a dual sealing ring and leakage ring design that vents any seal failure to the outside via signal bores rather than mixing shell/tube media.
Price Range
Contact directly for BCF P, CCFA and CPS pricing, since exchange surface and configuration are specified per project
Why Choose Atlantic Supplies Trading
- Brand Range: Stocks the FUNKE BCF P universal series, the CCFA gas-cooling series, and the CPS standard-series (based on TEMA type BEW).
- Technical Depth: Offers both O-version (narrow baffle, thin liquids) and W-version (wide baffle, viscid media) configurations across a 110-size modular range.
- Coverage Area: Based at Al Waha Square, Othman Bin Affan, Riyadh.
- Contact: Single landline order line — +966 11 210 6088.
- Industries Served: Gas Processing, General Industrial Cooling, Process Engineering.
- Note: The strongest first call on this page for a gas-side cooler (Heat Exchanger For Oil And Gas Processing) or a standardized, cost-optimised process cooler.
Ruhaily — FUNKE Safety, Exhaust Gas & High-Temperature Shell & Tube Heat Exchanger Supplier in Riyadh
RIYADH · Sulay · FUNKE safety (SWF/SWP), exhaust gas (WRA) and shell & tube (TDW) series stockist
Phone: +966 57 651 8551 | Address: Sulay, Riyadh, KSA
Heat Exchanger Products They Offer
- Funke SWF/SWP Safety Quality Heat Exchanger, 150°C — Brand: FUNKE | Model: SWF/SWP | Size: 300 in | Maximum Temperature: 150°C A three-chamber safety design with concentric internal tube pairs forming a sealed, barrier-fluid-filled safety space between the two operating media; pressure-monitored to detect any shell- or tube-side leak before cross-contamination occurs.
- Funke WRA 200 Exhaust Gas Quality Heat Exchanger, 150°C — Brand: FUNKE | Model: WRA 200 | Maximum Temperature: 150°C | Design: Fixed non-removable tube bundle, tube-side single-pass Purpose-built for exhaust gas cooling (gas routed through the tubes); a thermal shield protects the tube/tubesheet connections against overheating, and an optional axial compensator prevents excess thermal-expansion forces.
- Funke TDW Quality Shell And Tube Heat Exchanger, 500°C — Brand: FUNKE | Model: TDW | Diameter: 60 mm | Maximum Temperature: 500°C A non-fired shell-and-tube pressure system with two separate pressure chambers; custom process gas coolers up to 600 bar are available on request, with standard-programme units manufactured in defined shell diameter/length graduations.
Price Range
Contact directly for SWF/SWP, WRA 200 and TDW pricing, since these are specified per project duty, temperature and diameter
Why Choose Ruhaily
- Safety & High-Temperature Range: Stocks the highest-temperature-rated units on this page — the TDW shell and tube exchanger to 500°C — alongside a dedicated double-wall safety design and an exhaust-gas-specific series.
- Application Fit: The WRA 200 and TDW ranges suit refinery heat exchanger and industrial process gas cooling applications specifically.
- Coverage Area: Based in Sulay, Riyadh.
- Contact: Single mobile order line — +966 57 651 8551.
- Industries Served: Refining, Exhaust Gas Cooling, High-Temperature Process Engineering, Safety-Critical Cooling.
- Note: The strongest first call on this page for a Steam Heat Exchanger For Process Heating And Hot Water or Stainless Steel Heat Exchanger For Corrosive Applications where cross-contamination risk needs a safety-space design.
Alka Boiler — Calorifier, Heat Recovery & Boiler-Side Heat Exchanger Supplier in Riyadh
RIYADH · Al Wasat Complex 1, As Salhiyah · Boiler and hot-water heat exchanger specialist · Munters & FUNKE stockist
Phone: +966 11 472 1323 | Address: Al Wasat Complex 1, As Salhiyah, Riyadh, KSA
Heat Exchanger Products They Offer
- Heat X Rotate Munters — Brand: MUNTERS A high-performance heat recovery system designed for poultry and swine facilities, providing very high heat recovery efficiency, simple automated cleaning, full corrosion-resistant design, and reducing energy costs by up to 35%.
- Funke CP Universal Cooler Quality Heat Exchanger, 250°C — Brand: FUNKE | Design: Removable tube bundle, dual sealing ring + leakage ring Available in single-pass, two-pass or four-pass tube-side design; any seal failure is signalled via leakage-ring signal bores before shell/tube media can mix.
- Storage And Non Storage Type Calorifiers Heat Exchangers — Type: Indirect-fired water heater Heating relies on an indirect external heat source (steam or hot water) passing through a heat exchanger — heating the water contained in the vessel (storage type) or heating the water as it passes through the coil (non-storage/instantaneous type).
Price Range
Contact directly for Munters heat recovery, Funke CP and calorifier pricing, since all three are specified per project capacity and duty
Why Choose Alka Boiler
- Boiler-Side Specialization: Trades as a boiler specialist, a natural fit for storage and non-storage calorifiers used in hot water heating systems.
- Brand Range: Stocks the MUNTERS Heat-X Rotate heat recovery system and the FUNKE CP universal cooler.
- Coverage Area: Based at Al Wasat Complex 1, As Salhiyah, Riyadh.
- Contact: Single landline order line — +966 11 472 1323.
- Industries Served: Boiler & Hot Water Systems, Poultry & Livestock Facilities, HVAC.
- Note: The strongest first call on this page for a Heat Exchanger For Hot Water Heating Systems, a Water To Water Heat Exchanger For Heating Systems, or a heat recovery system for an agricultural/livestock facility.
Heat Exchanger Specification Comparison Table
Brand, temperature rating and design for the named products with published specifications:
| Product | Brand | Max. Temp / Pressure | Tube Bundle |
|---|---|---|---|
| Heat Exchanger 16 l, 10–50 Bar | KSB | 200°C / 50 Bar | Not stated (API 682 seal cooler) |
| Heat Exchanger 20 To 120 Bar, 1 l | KSB | 270°C / 120 Bar | Not stated (API 682 seal cooler) |
| Heat Exchanger 4 m | KSB | Not stated | Tube-in-tube |
| Funke C 500 Universal Cooler | FUNKE | Not stated | Removable (floating head) |
| Funke C 400 Universal Cooler | FUNKE | Not stated | Removable (floating head) |
| Funke C 100 Universal Cooler (C 200) | FUNKE | 320°C | Removable (floating head) |
| Funke BCF P Universal | FUNKE | 150°C | Fixed or removable (P) |
| Funke CCFA Gas Cooling | FUNKE | 230°C | Fixed |
| Funke CPS Standard | FUNKE | 110°C | Removable |
| Funke SWF/SWP Safety | FUNKE | 150°C | Fixed (F) or Removable (P), 3-chamber |
| Funke WRA 200 Exhaust Gas | FUNKE | 150°C | Fixed, non-removable |
| Funke C 100 (alt: TDW) Shell & Tube | FUNKE | 500°C | Fixed, 60 mm diameter |
| Funke CP Universal Cooler | FUNKE | 250°C | Removable |
Note: Rows marked "Not stated" reflect specifications not published in the source product listing rather than a confirmed absence — always confirm the exact pressure, temperature and tube bundle configuration directly with the supplier before ordering.
What Are Five Types Of Heat Exchangers?
The five most common heat exchanger types, each matched to a product or application stocked on this page:
- Shell & Tube Heat Exchanger: the most common industrial type for oil and gas applications, as on the Funke TDW range from Ruhaily.
- Plate Heat Exchanger: a stack of thin plates giving a compact, high-efficiency design for hot water and industrial heating duty.
- Double-Pipe Heat Exchanger: a pipe within a pipe (tube-in-tube), suited to smaller, high-temperature duties such as the KSB Heat Exchanger 4 m.
- Air Cooled Heat Exchanger: uses ambient air rather than water as the cooling medium, suited to sites without a reliable water supply for industrial process cooling.
- Coil / Calorifier Heat Exchanger: an indirect-fired coil or storage vessel design used for hot water heating systems, as on the Storage And Non Storage Type Calorifiers from Alka Boiler.
Brazed plate (for HVAC and refrigeration) and Water To Water designs (for heating systems) are also stocked in the wider Heat Exchanger Types list below, bringing the total named type count on this page closer to eight.
Heat Exchanger Applications
Match your specific job to the right heat exchanger, each tied to a specific in-stock product:
heat exchanger for hot water heating systems
Storage And Non Storage Type Calorifiers Heat Exchangers
Type: Indirect-fired water heater | Design: Storage (vessel-heated) or non-storage (coil-heated)
Function: Heats domestic or process hot water using an indirect steam or hot water heat source.
Available From: Alka Boiler — +966 11 472 1323
heat exchanger for industrial process heating
Funke CPS Standard Quality Heat Exchanger, 110°C
Type: Standardized removable tube bundle exchanger | Exchange Surface: 0.47–104.02 m²
Function: Economical, standardized process heating across a wide graduated size range.
Available From: Atlantic Supplies Trading — +966 11 210 6088
heat exchanger for oil and gas processing
Funke CCFA Gas Cooling Quality Heat Exchanger, 230°C
Type: Fixed tube bundle gas cooler | Design: Tube-side single-pass, gas through the tubes
Function: Integrates directly into gas pipework for oil and gas process cooling duty.
Available From: Atlantic Supplies Trading — +966 11 210 6088
heat exchanger for steam and condensate systems
Heat Exchanger 20 To 120 Bar, 1 l
Type: KSB API 682 seal cooler | Working Pressure: 20–120 Bar | Process Circuit Temp: −29 to +270°C
Function: Suited to boiler feed water and hot water/steam-adjacent circuits requiring high-pressure cooling.
Available From: KSB Pumps Arabia Limited — +966 11 227 7060
heat exchanger for HVAC and chilled water systems
Funke C 400 Universal Cooler Quality Heat Exchanger
Type: Removable tube bundle cooler | Design: Floating head, side inspection cover
Function: General-purpose cooling duty adaptable to chilled water and HVAC-adjacent process loops.
Available From: AES Arabia LTD — +966 11 4772398
heat exchanger for chemical processing plants
Funke C 500 Universal Cooler Quality Heat Exchanger
Type: Removable tube bundle cooler | Design: Maximum-surface floating head, removable shell chamber
Function: Primarily used in chemical and petrochemical industries as a process gas cooler, oil cooler or condenser.
Available From: AES Arabia LTD — +966 11 4772398
heat exchanger for food and beverage processing
Funke CP Universal Cooler Quality Heat Exchanger, 250°C
Type: Removable tube bundle cooler | Design: Dual sealing ring + leakage ring, single/two/four-pass
Function: Leakage-ring design prevents cross-contamination between shell and tube media, relevant to food/beverage-grade process safety.
Available From: Alka Boiler — +966 11 472 1323
Heat Exchanger Types
A closer look at each heat exchanger type, matched to a specific in-stock product where one is available:
plate heat exchanger for hot water and industrial heating
Storage And Non Storage Type Calorifiers Heat Exchangers
Type: Indirect-fired water heater | Function: Heats hot water for heating and hot water systems via an indirect steam or hot water source.
Available From: Alka Boiler — +966 11 472 1323
shell and tube heat exchanger for oil and gas applications
Funke TDW Quality Shell And Tube Heat Exchanger, 500°C
Type: Non-fired shell-and-tube pressure system | Diameter: 60 mm | Max. Temp: 500°C
Function: Two separate pressure chambers exchange heat between media without mixing; custom units to 600 bar available.
Available From: Ruhaily — +966 57 651 8551
brazed plate heat exchanger for HVAC and refrigeration
Heat Exchangers HT (general type)
Type: Compact heat exchanger design | Function: Transfers heat between two or more fluids of different temperatures through a solid separator, suited to compact HVAC and refrigeration circuits.
Available From: Contact suppliers above — see individual listings
air cooled heat exchanger for industrial process cooling
Air Cooled Heat Exchanger Manufacturer in Saudi Arabia (general category)
Type: Air-cooled design | Function: Uses ambient air rather than water to cool process fluids, suited to sites without a reliable cooling water supply.
Available From: Contact suppliers above — see individual listings
double pipe heat exchanger for high temperature applications
Heat Exchanger 4 m
Type: Tube-in-tube (double-pipe) design | Material: Carbon Steel Grade ASTM A36 | Pipe: 12″ Sch 40 | Circulation Pipe: 2″ Sch 80
Function: Cools single and double mechanical seals; frequently used for hot water, boiler feed water and hydrocarbon cooling duty.
Available From: KSB Pumps Arabia Limited — +966 11 227 7060
steam heat exchanger for process heating and hot water
Heat Exchanger 16 l, 10–50 Bar
Type: KSB API 682 seal cooler | Working Pressure: 10–50 Bar | Process Circuit Temp: −29 to +200°C
Function: Frequently used for hot water and boiler feed water process heating duty.
Available From: KSB Pumps Arabia Limited — +966 11 227 7060
water to water heat exchanger for heating systems
Funke CP Universal Cooler Quality Heat Exchanger, 250°C
Type: Removable tube bundle cooler | Design: Single, two or four-pass tube-side configuration
Function: Water-to-water heat transfer for heating system loops with leak-detection between shell and tube sides.
Available From: Alka Boiler — +966 11 472 1323
stainless steel heat exchanger for corrosive applications
Funke SWF/SWP Safety Quality Heat Exchanger, 150°C
Type: Three-chamber safety design | Size: 300 in | Max. Temp: 150°C
Function: Sealed, barrier-fluid safety space with pressure monitoring, suited to corrosive or hazardous media where cross-contamination must be detected immediately.
Available From: Ruhaily — +966 57 651 8551
Frequently Asked Questions
Who are some major heat exchanger manufacturers in Saudi Arabia?
The suppliers covered here are KSB Pumps Arabia Limited (API 682 mechanical seal cooling exchangers), AES Arabia LTD (FUNKE Universal Cooler C-series), Atlantic Supplies Trading (FUNKE BCF, CCFA and CPS series), Ruhaily (FUNKE SWF/SWP, WRA and TDW series), and Alka Boiler (Munters heat recovery and calorifiers) — all based in Riyadh and each acting as leading heat exchanger manufactures in Saudi Arabia within their respective product ranges.
What are five types of heat exchangers?
Five of the most common heat exchanger types are shell & tube, plate, double-pipe, air cooled, and coil/calorifier — see the "What Are Five Types Of Heat Exchangers?" section above for a named product example of each type stocked on this page. Brazed plate and water-to-water designs are also covered in the wider Heat Exchanger Types section.
What is the 10-13-rule for heat exchangers?
The "10-13-rule" is not a standardized term recognised across the major heat exchanger references used in this source's catalogue (TEMA, API 682, ASME-VIII, PED) or by the suppliers listed here. It may refer informally to a rule-of-thumb minimum temperature approach used in some heating/cooling design contexts, but there is no single universally agreed definition. If you encountered this term in a specific project specification or textbook, confirm its exact meaning with the engineer or source that used it, or ask KSB Pumps Arabia Limited or AES Arabia LTD directly, since API 682 and TEMA govern the sizing rules that these suppliers actually design to.
What is Heat Exchanger Sheel and Tube [Shell and Tube]?
A shell and tube heat exchanger is a non-fired pressure system with two separate pressure chambers — the shell chamber and the tube chamber — separated by the internal tube wall. Two media flow past one another without mixing; if there is a temperature difference, heat is exchanged across the tube wall. The Funke TDW Quality Shell And Tube Heat Exchanger, 500°C from Ruhaily is the named shell-and-tube product on this page.
What is the Heat Exchanger Working Principle?
A heat exchanger transfers heat between two or more fluids of different temperatures — liquids, vapors or gases — without mixing them, typically through a solid separator (indirect contact). The heat-transferring process can be gas-to-gas, liquid-to-gas, or liquid-to-liquid depending on the type employed; see the Heat Exchanger Working Principle section above for a fuller explanation.
Is alfa laval heat exchanger available from these suppliers?
Alfa Laval is not a named brand carried by any of the five suppliers in this source’s catalogue; the brands actually stocked here are KSB (mechanical seal coolers), FUNKE (universal cooler, gas cooling, safety and shell-and-tube series) and MUNTERS (poultry/swine heat recovery). If you specifically need Alfa Laval equipment, contact Alfa Laval’s official Saudi distributor directly; for an equivalent plate or shell-and-tube design, the FUNKE ranges above are the closest stocked alternative.
Are there Heat exchanger suppliers in ksa khobar?
All five suppliers named in this source are based in Riyadh; regional presence in Khobar or the Eastern Province was not published in this source listing — contact each supplier directly to ask about delivery or branch coverage to Khobar.
Is there a Plate Heat Exchanger Manufacturers In Saudi Arabia option, and an Air Cooled Heat Exchanger Manufacturer in Saudi Arabia?
A dedicated plate or air-cooled unit was not separately itemised with full specifications in this source’s catalogue, though both are listed as general Heat Exchanger Types the suppliers can be asked about. For a compact plate exchanger or an air-cooled unit for industrial process cooling, contact AES Arabia LTD or Atlantic Supplies Trading directly, since their FUNKE range spans multiple exchanger construction types.
What Finned Tube Heat Exchangers Manufacturer and Supplier in Saudi Arabia and Coil Heat Exchanger Manufacturer in Saudi Arabia options exist?
Finned tube and standalone coil heat exchangers were not separately itemised as named products in this source’s catalogue. The closest published equivalent is the Storage And Non Storage Type Calorifiers Heat Exchangers from Alka Boiler, which uses a coil design for the non-storage (instantaneous) type — confirm directly with the suppliers above if a dedicated finned tube unit is required.
What is a Pressure Vessel Heat Exchanger in Saudi Arabia used for?
A pressure vessel heat exchanger is a non-fired pressure system (such as the shell-and-tube or seal cooler designs on this page) built and certified to a pressure equipment standard — API 682, PED, AD-2000 or ASME-VIII Div I/II. The KSB seal cooler range and the FUNKE C-series, BCF, CCFA and TDW ranges on this page are all pressure vessel-class heat exchangers, certifiable to these standards on request.