Manual Tool Set Suppliers in Saudi Arabia – Hand Tools, Workshop Kits and Industrial Tool Sets

Most procurement teams in Saudi Arabia know exactly what they need, a 200-piece industrial hand tool set for a shutdown, a mechanics tool set for an automotive workshop, a VDE-rated electrician tool kit for substation work. The problem is finding the right supplier fast: one who stocks the brand you need, holds ex-KSA inventory, and can deliver before the work order closes.

This directory covers verified manual tool set suppliers and authorized distributors across Saudi Arabia.

Manual Tool Set (200 to 500 pc) – Industrial Facility Maintenance, Jubail and Yanbu

A maintenance team covering rotating equipment, valves, and piping in a petrochemical plant needs full metric and SAE coverage across all drive sizes. Shadow foam toolboxes are required in most Aramco and SABIC facilities for FOD control. Torque wrenches must meet ISO 6789 for bolted joint documentation on pressure systems.

• Socket set: 1/4, 3/8, 1/2 inch drive · Metric 4 to 32mm · SAE 3/16 to 1-1/4 inch · Deep and shallow
• Combination wrenches: 6 to 32mm · Chrome vanadium (CrV) · Satin or mirror finish
• Torque wrenches: 1/4 inch (5 to 25 Nm), 3/8 inch (20 to 100 Nm), 1/2 inch (40 to 200 Nm) · ISO 6789 certified, plus or minus 4%
• Pliers set: slip-joint, needle-nose, diagonal, water-pump · KNIPEX preferred for oil and gas
• Screwdrivers: flat and Phillips, 8 to 12 piece · S2 steel bits, oil-resistant grips
• Storage: shadow foam inlay toolbox or roller cabinet with foam-lined drawers
• Material: CrV for wrenches and sockets · CrMo for high-torque impact variants · HRC 56 to 62

Price range: SAR 8,500 to 28,000 for a 200 to 300 pc industrial set (PROTO, FACOM) | SAR 3,500 to 9,500 for mid-range (Stanley, Bahco)

Hand Tool Set (40 to 100 pc) – General Workshop and Contractor Use, Riyadh and Jeddah

General contractors, facility maintenance teams, and site supervisors working across multiple trades keep a compact hand tool set on site for everyday tasks: fastening, adjustment, minor repairs, and installation work. A 40 to 100 piece hand tool set covers the daily requirements without carrying full workshop inventory to every site.

• Combination wrenches: 8 to 19mm · Open and ring end
• Screwdrivers: flat and Phillips, 6 piece minimum · Bi-material handles
• Pliers: combination and long-nose · 2 to 3 piece
• Adjustable wrench: 200mm and 300mm
• Socket set: 3/8 inch drive, metric 8 to 19mm with ratchet handle
• Tape measure, spirit level, utility knife: standard inclusions in general contractor sets
• Storage: blow-molded carry case or canvas roll pouch for site portability

Price range: SAR 450 to 1,800 (entry level) | SAR 1,800 to 5,500 (professional branded sets)

Workshop Tool Kit – Fixed Workshop Setup, Industrial Facilities and Automotive Garages

A fixed workshop needs a more comprehensive setup than a portable site kit. Workshop tool kits for industrial and automotive use typically include a roller cabinet or wall-mounted tool panel, full socket coverage across multiple drive sizes, multiple ratchet handles, and a range of specialty tools such as pullers, extractors, and bearing tools. Piece counts typically run 150 to 300 pieces for a complete workshop setup.

• Full socket set: 1/4, 3/8, 1/2 inch drive · Metric and SAE · Standard and deep · 6-point preferred
• Multiple ratchet handles: 72-tooth or finer · Swivel-head variants for confined access
• Torque wrench: 1/2 inch drive, 40 to 200 Nm
• Combination wrenches: full metric and SAE set
• Hex key (Allen) sets: short and long arm · Metric and inch
• Ball peen hammer, rubber mallet, cold chisels
• Storage: roller cabinet with foam-lined drawers or shadow board system

Price range: SAR 3,500 to 9,500 (mid-range) | SAR 9,500 to 28,000 (professional workshop setup)

Mechanics Tool Set (100 to 150 pc) – Automotive Workshop, Riyadh

Automotive service centers in KSA running Toyota, Ford, and GM vehicles need 1/4 to 1/2 inch drive socket coverage, long-arm hex keys, Torx bits (T10 to T60), and quality ratchet sets with fine-tooth mechanisms (72+ teeth). OEM fasteners often require Torx Plus, spline, and bi-hex variants. Ergonomic grip handles are important in high-heat KSA workshop conditions where surface temperatures can exceed 60 degrees Celsius.

• Ratchet handles: 1/4, 3/8, 1/2 inch drive · 72-tooth or finer for tight access
• Socket set: Metric plus SAE plus Torx plus Bi-hex · Standard and deep · 6-point preferred
• Hex key (Allen) sets: long and short arm · Metric 1.5 to 19mm · SAE 1/16 to 3/4 inch
• Extensions: 50mm, 150mm, 250mm per drive size · Universal joint adapters
• Combination wrenches: 8 to 24mm · Anti-slip handle or knurled grip
• Storage: blow-molded carry case or metal rolling toolbox for workshop use

Price range: SAR 1,800 to 5,500 (Stanley, Bahco, SATA) | SAR 6,000 to 14,000 (PROTO, FACOM, Snap-on)

Electrician Tool Kit – VDE Insulated, 1000V Rated, IEC 60900 Compliant · MEP Contractors KSA

Electrical contractors working on live switchgear, substations, and MV panels need VDE-rated (1000V AC / 1500V DC) insulated tools that meet IEC 60900. Non-sparking tool sets are also required for hazardous classified zones in oil and gas. Each tool in the kit must carry individual VDE approval markings. Set-level certification alone does not satisfy Aramco electrical safety requirements.

• Insulated screwdrivers: 6 to 10 piece · Flat, Phillips, Pozidriv · VDE/IEC 60900 per piece
• Insulated pliers: combination, long-nose, diagonal · 1000V rated · KNIPEX or WERA recommended
• Insulated nut drivers and wrenches: 6 to 13mm · Dual-layer insulation
• Cable stripper and wire cutter: insulated handles · Wire gauge 0.5 to 6mm squared
• Voltage tester (non-contact) and phase tester: included in full electrician kits
• Storage: roll-up pouch or hard case with individual tool slots

Price range: SAR 1,400 to 4,500 (entry VDE sets) | SAR 5,500 to 14,000 (KNIPEX, WERA full electrician kits)

Bosch All-in-One Hand Tool Kit – General Maintenance and Contractor Use

The Bosch All-in-One Hand Tool Kit is a ready-to-use general maintenance solution widely used across facility management teams, construction sites, and small workshops in Saudi Arabia. It bundles commonly needed screwdrivers, pliers, wrenches, and measuring tools in a single carry case, making it a practical option for general contractors who need a reliable everyday kit without sourcing individual tools separately.

• Contents: screwdrivers (flat and Phillips), combination pliers, adjustable wrench, tape measure, spirit level, utility knife, and sockets
• Case: blow-molded or fabric carry case for site portability
• Brand: Bosch · Standard warranty applies
• Application: facility maintenance, general site work, light workshop use, MEP contractors
• Not intended for heavy-duty torque applications or oil and gas shutdown maintenance

Price range: SAR 350 to 900 (standard Bosch general sets) | Available from major KSA distributors including Albawardi nationwide

46 in 1 Pcs Tool Kit Socket and Screwdriver Set – Light Workshop and Maintenance

The 46-piece tool kit combining sockets and screwdriver bits is a common entry-level choice for light workshop maintenance, facility management technicians, and general site use. It covers the most frequently used fastener sizes across both metric and imperial in a compact carry case. Suited for tasks that do not require high-torque application or specialist tooling.

• Typical contents: 1/4 inch drive ratchet handle, 25 to 30 sockets (metric 4 to 14mm), 10 to 12 screwdriver bits (flat, Phillips, Torx), extension bars, adapters
• Material: CrV steel construction standard at this price point
• Case: compact blow-molded or plastic storage case
• Application: light assembly, electrical panel work, appliance maintenance, general contracting
• Not rated for 1/2 inch drive or high-torque applications

Price range: SAR 180 to 650 depending on brand and quality tier | Available from most KSA tool distributors

Multipurpose Tool Kit – Mixed Trade Applications, Construction and FM Teams

A multipurpose tool kit is built for teams that work across more than one trade on the same site: installing fittings, adjusting electrical panels, cutting materials, and measuring layouts in a single shift. Facility management companies, MEP subcontractors, and multi-trade construction teams in Saudi Arabia commonly specify multipurpose kits for crew-level tool supply rather than issuing full specialist sets to every technician.

• Typical contents: screwdrivers, combination pliers, wire stripper, tape measure, spirit level, utility knife, adjustable wrench, sockets (metric), hammer
• Piece count: 25 to 80 pieces depending on specification
• Material: CrV steel on hand tools · plastic handles standard, bi-material available
• Application: FM technicians, general site crews, multi-trade subcontractors
• Storage: fabric tool bag, roll pouch, or compact case

Price range: SAR 280 to 1,200 | Available from Albawardi, MOSACO, and local KSA trading establishments

ATEX Tool Set – Non-Sparking, Hazardous Zone Rated · Oil and Gas, Petrochemical KSA

Working in ATEX Zone 1 or Zone 2 classified areas in a refinery, gas plant, or offshore facility requires non-sparking tools made from copper-beryllium or aluminum-bronze alloy. Standard steel tools are not permitted in these areas because they can generate sparks on impact with steel surfaces. Aramco and SABIC site safety rules specify non-sparking hand tools for maintenance work in classified areas. All tools must be traceable and accompanied by material certificates.

• Material: copper-beryllium (Cu-Be) or aluminum-bronze (Al-Br) alloy · Non-ferrous, non-sparking
• Typical contents: wrenches (open and ring), pliers, hammers, chisels, screwdrivers, sockets
• Certification: ATEX rated · Material certificates (MTR) required for Aramco procurement
• Applications: ATEX Zone 1 and Zone 2 areas · Gas compression, flare systems, chemical reactors
• Brands available in KSA: GEDORE, FACOM EX, PROTO EX series through authorized distributors
• Traceability: heat numbers, mill certificates, and individual tool markings required for site entry

Price range: SAR 4,500 to 35,000+ depending on set size and alloy specification · ATEX sets carry significant material cost premium over standard CrV tools