Roller suppliers in Saudi Arabia support road construction, municipal paving, logistics parks, industrial zones, and utility reinstatement projects across Riyadh, Jeddah, and Dammam. Buyers in KSA typically choose suppliers based on machine availability within the Kingdom, the ability of rollers to operate under high ambient temperatures, and how quickly service technicians and spare parts can reach active sites. Suppliers with permanent yards, trained operators, and direct OEM or distributor status are preferred for both government and private infrastructure projects.
The Caterpillar CB1.8 Utility Roller is supplied for precision compaction where surface control and maneuverability are critical. It is powered by a Cat C1.1T diesel engine operating at 2800 rpm, features a 30-liter fuel tank, and has an overall machine length of 2040 mm. This roller is used for sidewalks, parking bays, curb-side asphalt, cycle paths, and urban road patching where heavier rollers may damage finished surfaces. Its lower operating weight allows controlled compaction of thin asphalt layers and granular base material. In Saudi Arabia, utility rollers of this class are typically priced between SAR 55,000 and SAR 110,000, depending on drum type, water spray system, and service coverage. Supply provided by Zahid Tractor, Amir Fahad Street, Jeddah, Saudi Arabia. Contact: +966 12 667 1156.
The HAMM HD 70 tandem roller is supplied for continuous asphalt compaction on highways, service roads, logistics yards, and industrial facilities. It operates at approximately 7,000 kg, with a 1500 mm drum width and a maximum working width of 1600 mm. The machine’s vibratory system is designed to achieve target density with fewer passes, reducing fuel consumption and cycle time during long paving runs. It is commonly selected for projects involving hot-mix asphalt under high temperature conditions. In the Saudi market, rollers of this capacity are positioned between SAR 420,000 and SAR 720,000, depending on vibration configuration, telemetry options, and service contracts. Supply is handled by Bakheet Company for Machinery, Al Haramain Highway, Jeddah, Saudi Arabia. Contact: +966 12 691 0550.
The BOBCAT 48-inch vibratory roller is used for asphalt repairs, grading support, and commercial paving where vibration control and surface finish are essential. It features a 1219 mm drum width, 1537 mm overall width, and an operating weight of approximately 811 kg. This roller is suited for thin asphalt courses, base preparation, and maintenance work on private developments and internal road networks. Mid-size vibratory rollers in Saudi Arabia generally fall within SAR 90,000 to SAR 180,000, depending on configuration and availability. Supply and support are provided by General Trading and Equipment Company, Al Khalidiyah Al Janubiyah District, Dammam, Saudi Arabia. Contact: 00966 13 887 5722.
Compactor rollers supplied in KSA are primarily used for soil, gravel, and mixed-material compaction on municipal roads, residential compounds, utility corridors, and small infrastructure projects. These machines are selected for steering accuracy, compact dimensions, and consistent compaction over limited working areas.
The CW34 compactor roller is used for compacting gravel, soil, and thin asphalt layers on small to medium paving works. Its compact chassis allows operators to maneuver easily on narrow roads and internal developments, reducing overlap and improving surface uniformity. Compactor rollers of this category are typically priced between SAR 60,000 and SAR 140,000 in Saudi Arabia. The supplier is Dar Al Remali Trading EST, Al Sulay District, Riyadh, Saudi Arabia. Contact: +966 59 219 1516.
The JCB VMD70 compaction equipment is supplied for subgrade preparation, trench backfilling, and soil compaction before asphalt or concrete works. With load capacities ranging from 0.7 to 20 tons, it supports varying soil conditions across infrastructure and utility projects. In Saudi Arabia, pricing typically ranges from SAR 150,000 to SAR 520,000, depending on model and configuration. Supply and technical support are provided by Abunayyan Trading, Riyadh, Saudi Arabia. Contact: +966 11 477 9111 or +966 800 246 9999.
The Bomag BW120 AD-5 tandem roller is supplied for asphalt finishing, patchwork, and narrow road construction projects. With an operating weight of approximately 2.7 tons and a drum width close to 1,200 mm, this roller is used on residential streets, parking areas, and access roads where space constraints limit larger machines. Its vibration system is tuned for smooth compaction without surface tearing. In the Saudi market, this model is generally positioned between SAR 220,000 and SAR 350,000. Supply is handled by Dar Al Remali Trading EST, Al Sulay District, Riyadh, Saudi Arabia. Contact: +966 59 219 1516.
The Sakai SW800 tandem vibratory roller is supplied for heavy asphalt compaction on highways and industrial zones requiring higher compaction force and durability. The machine operates at approximately 8,000 kg with a wide drum configuration designed for long paving runs under high ambient temperatures. Contractors select this model for government and infrastructure projects where density consistency is critical. In Saudi Arabia, rollers of this capacity are typically priced between SAR 680,000 and SAR 950,000, depending on specification and warranty coverage. Supply and support are provided by Al Qahtani Vehicle & Machinery Co, located on King Abdulaziz Road, Dammam, Saudi Arabia. Contact: +966 13 826 1477.
Road construction in Saudi Arabia requires rollers capable of operating continuously under high ambient temperatures while maintaining consistent compaction output. Contractors typically prioritize drum width, operating weight, vibration efficiency, and long-term durability over nominal engine power alone.
Tandem rollers such as the HAMM HD series and heavy JCB compaction models are commonly selected for highways and industrial roads because they deliver uniform density across wide asphalt lanes and withstand extended duty cycles. These machines are preferred on government and infrastructure projects where compaction quality directly affects approval and lifecycle cost.
The JCB VMT160 tandem compactor roller is supplied for heavy base and asphalt compaction on major road construction projects. With an operating weight of approximately 16 tons and a wide drum system, this machine is used for primary asphalt layers and deep base compaction where high centrifugal force is required. Contractors prefer this model for large-scale infrastructure works that demand continuous operation. In Saudi Arabia, pricing generally ranges from SAR 620,000 to SAR 900,000 depending on configuration. Supply is handled by Abunayyan Trading, Riyadh, Saudi Arabia. Contact: +966 11 477 9111.
Pedestrian road rollers are used for trench reinstatement, sidewalks, cable routes, and confined-access maintenance where ride-on rollers cannot operate. Buyers focus on vibration force, drum width, operating weight, and ease of transport.
The MSR7M pedestrian road roller operates at approximately 737 kg, with a 650 mm drum width, 55 Hz vibration frequency, and centrifugal force around 20 kN. It is suitable for compacting granular base layers and thin asphalt courses. In Saudi Arabia, pedestrian rollers of this specification are typically priced between SAR 18,000 and SAR 45,000. The supplier is AL Fanoos Tools and Industrial Equipment, Rail Street, Riyadh, Saudi Arabia. Contact: +966 11 446 2231.
Single-drum pedestrian rollers supplied by Safety Hand Tools And Industrial Equipments are used for sidewalks and light reinstatement work where portability is critical. These machines represent the lowest cost segment in the roller market. Address: Omar Al Mukhtar Road, Riyadh, Saudi Arabia. Contact: +966 53 678 6786.
The Wacker Neuson RD7 walk-behind roller is supplied for trench reinstatement, sidewalk construction, and confined-access maintenance works. It features an operating weight of approximately 700 kg, dual vibration settings, and hydrostatic drive for precise control in narrow areas. This roller is commonly used by utility contractors working in dense urban environments. In Saudi Arabia, pedestrian rollers of this specification are typically priced between SAR 38,000 and SAR 70,000 depending on engine type and accessories. Supply is provided by Safety Hand Tools And Industrial Equipments, Omar Al Mukhtar Road, Riyadh, Saudi Arabia. Contact: +966 53 678 6786.
Roller machine prices in Saudi Arabia vary according to operating weight, drum configuration, vibration system, engine type, and after-sales support. Pedestrian and compact rollers occupy the entry-level segment, compactor rollers fall into the commercial range, and tandem or highway rollers command higher investment due to durability and productivity.
The SDR600 compact road roller, supplied by Majal Tools Trading, weighs approximately 330 kg and operates with a 3.1 kW engine. It is commonly used for maintenance work and confined paving areas, with pricing typically between SAR 25,000 and SAR 65,000. Roller SUPPLIER Address: Al Amal, Riyadh, Saudi Arabia. Contact: +966 58 098 5143.
Vibratory rollers are widely used in Saudi Arabia for asphalt and granular compaction where vibration reduces the number of passes required to achieve target density. Contractors usually select suppliers with local service teams and spare parts availability to avoid downtime during road works.
Ride-on vibratory rollers such as BOPU models are used for commercial paving and medium-scale road construction. These machines are generally priced between SAR 120,000 and SAR 260,000, depending on configuration. Supply is provided by Al Hazm Establishment For Industrial Equipment, Al Amal, Riyadh, Saudi Arabia. Contact: +966 11 402 2801.
The XCMG XD123 tandem vibratory roller is supplied for asphalt compaction on municipal and industrial road projects where cost efficiency and solid performance are required. The machine operates at approximately 12 tons with a wide drum system and vibration frequencies suitable for thick asphalt layers. It is often selected by contractors looking for competitive pricing without compromising output. In Saudi Arabia, this model is typically priced between SAR 480,000 and SAR 720,000. Supply is handled by Al Sharq Equipment, operating from Riyadh, Saudi Arabia. Contact: +966 11 208 9999.
