Screw Clamp Suppliers in KSA

FYIND connects procurement managers, mechanical engineers, HVAC contractors, MEP teams, and oil and gas facilities with verified Screw Clamp suppliers in KSA across Riyadh, Dammam, Jubail, and Jeddah. Available types include G Clamps, F Clamps, Heavy Duty Screw Clamps, Welding Screw Clamps, Pipe Screw Clamps, Bench Screw Clamps, Stainless Steel Screw Clamps, and Parallel Jaw Clamps in materials ranging from mild steel and forged steel to SS304, SS316, cast iron, and alloy steel. Sizes run from 2 inch through 24 inch to cover light commercial, industrial piping, structural fabrication, and heavy duty project requirements across Saudi Arabia.

All suppliers listed below are verified on FYIND with confirmed addresses, phone numbers, and product availability. Buyers sourcing through FYIND benefit from competitive pricing, bulk supply options, fast delivery to project sites across the Kingdom, technical support on material and load capacity selection, and direct quotation requests from multiple screw clamp dealers in KSA through a single platform.

Featured Screw Clamp Suppliers in Saudi Arabia

Standardised supplier profiles for all verified screw clamp suppliers in KSA listed in this directory, formatted for direct comparison of pricing, product range, delivery coverage, brands, and certifications.

Stainless Steel Screw Clamp · Food Processing Facilities | SS304 Screw Clamp · Washdown Areas | SS316 Screw Clamp · Chemical Plants

Corrosion Resistance Selection for Food, Pharmaceutical, and Chemical Processing

SS304 Screw Clamp – Daily Washdown Areas in a Food Processing Facility in Riyadh Requiring Hygiene Compliance

A structural steel fabrication contractor installing more than 2,500 metres of process piping for a food manufacturing facility in Riyadh typically compares galvanized and stainless steel screw clamps based on load capacity, corrosion resistance, and installation efficiency. Washdown areas requiring daily cleaning with water and detergent demand SS304 screw clamps over carbon steel or galvanized alternatives, since surface rust on standard mild steel clamps becomes an audit failure point during food safety inspections. Pipe diameters in food processing plants typically range from 25 mm to 150 mm, with load ratings between 40 kg and 250 kg per clamp depending on pipe weight and support spacing. Sahro Topline Glass Products Accessories (+966 56 450 8627) and Al Tuwaijri Industrial Equipment Company (+966 11 446 6222) stock SS304 screw clamps suited to this type of installation in Riyadh.

SS316 Screw Clamp – Chemical Processing Plants in Dammam Using Corrosive Cleaning Agents and Chlorinated Water

A chemical plant near Dammam running pipelines exposed to chlorinated water, acid rinses, or saline environments typically specifies SS316 rather than SS304, since the higher molybdenum content in SS316 resists pitting corrosion that accelerates in chloride rich settings. The cost premium over SS304 is generally 20 to 35 percent but is justified where clamp replacement intervals would otherwise drop below 18 months. Metal Fasteners Mfr Co Ltd (+966 13 817 5905) and Arabian Fasteners (+966 13 859 5228), both based in Dammam, supply SS304 and SS316 screw clamp wholesale in Saudi Arabia with bulk pricing available on project volumes.

Selection criteria: SS304 for indoor food and pharma washdown, SS316 for chlorinated or saline chemical environments, torque rating matched to pipe size, and thread size compatibility with existing pipe support hardware on site.

Heavy Duty Screw Clamp · Structural Steel Fabrication | Industrial Screw Clamp · Oil and Gas Piping | Forged Steel Screw Clamp · High Load Projects

High Static Load Applications in Fabrication and Oil and Gas Facilities

Heavy Duty Screw Clamp – Structural Steel Fabrication Workshop in Dammam Handling Beams up to 300 mm Section Width

A structural steel fabrication workshop in Dammam producing industrial frames and pressure vessel assemblies running daily shifts typically sources heavy duty screw clamps rated for static loads of 500 kg to 2,000 kg, with forged steel body construction rather than cast iron to resist fracture under repeated tightening cycles. Beam widths in heavy fabrication work commonly fall between 150 mm and 300 mm, and procurement teams typically specify a minimum throat depth of 120 mm to clear weld zones. Safe and Secure Trading Co. SSTC (+966 59 985 5109), based in Dammam, stocks plate clamps, beam clamps, and heavy duty screw clamps suited to this load range and serves industrial screw clamp buyers in KSA seeking lifting and rigging compatible hardware.

Industrial Screw Clamp – Oil and Gas Facility Piping Projects in Jubail Requiring Galvanized and Alloy Steel Grades

An oil and gas contractor installing 800 metres of process pipe at a facility in Jubail typically requests industrial screw clamps in hot-dip galvanized carbon steel for outdoor above grade runs and alloy steel where elevated temperature service above 120 degrees Celsius applies near steam or process lines. Galvanized clamps in this application generally carry a zinc coating of 85 microns minimum to meet corrosion resistance timelines on exposed offshore adjacent environments. ZABAR GLOBAL (+966 53 452 7910), based near the Jubail-Dammam Highway, and UCON BOLTS KSA (+966 57 285 1392) in Dammam supply U-bolts, threaded rods, pipe supports, and screw clamps for industrial projects of this type, with bulk quantities available for project procurement teams.

Selection criteria: forged steel for high static load fabrication, hot-dip galvanized for outdoor and coastal environments, alloy steel for elevated temperature service, and load capacity rated above 20 percent of the maximum expected static load for safety margin compliance.

Pipe Screw Clamp · HVAC Installations | Adjustable Screw Clamp · MEP Pipe Support | Screw Clamp Supplier in Riyadh · Fire Fighting Pipelines

HVAC, MEP, and Fire Fighting Pipeline Support Applications

Pipe Screw Clamp – HVAC Contractor Installing Chilled Water Pipelines in a Commercial Tower in Riyadh (SAR 8–85 per unit)

An HVAC contractor installing chilled water pipelines across 22 floors of a commercial tower in Riyadh typically orders adjustable pipe screw clamps in mild steel with zinc plating for indoor dry environments, sized from 2 inch to 8 inch to cover the range from branch circuits to main riser pipes. The procurement decision at this stage usually hinges on support spacing, which for HVAC copper and carbon steel pipe runs is typically 1.5 to 3 metres depending on pipe diameter and fluid weight, multiplied across hundreds of support points per floor. Al Tuwaijri Industrial Equipment Company (+966 11 446 6222) and Boltec Fasteners and Trading (+966 53 981 0400) both supply screw clamps for HVAC and MEP applications in Riyadh with stock availability suited to fast paced fit-out schedules.

Screw Clamp for Fire Fighting Pipelines – Securing Galvanized Steel Pipe in a Mixed Use Development in Jeddah

A fire fighting contractor installing FM approved sprinkler pipe in a mixed use development in Jeddah typically specifies pipe screw clamps in galvanized mild steel to match the galvanized pipe specification, with installation torque values documented for authority approval submissions. Clamp size selection for fire fighting lines typically runs from 1 inch to 6 inch for branch and main lines, with compliance to NFPA 13 or local civil defense standards driving documentation requirements at the procurement stage. Omar and Khaled Alattas (+966 12 689 3108), located in the First Industrial City, Jeddah, supplies industrial fasteners, bolts, screws, and clamps suited to fire fighting and building services projects in the Western Region.

Selection criteria: galvanized mild steel for indoor dry and fire fighting pipe, zinc coated carbon steel for HVAC in non-aggressive environments, thread size matching site standard hardware, and support spacing documentation available from the supplier where authority submissions are required.

Welding Screw Clamp · Metal Fabrication | G Clamp and F Clamp · Workshop and Bench Use | Woodworking Screw Clamp · Furniture Manufacturing

Workshop, Fabrication, and Woodworking Applications

Welding Screw Clamp and G Clamp – Metal Fabrication Workshop in Riyadh Running Structural Assembly Jigs

A metal fabrication workshop in Riyadh producing custom steel assemblies and structural frames typically maintains a standing inventory of G Clamps in 4 inch, 6 inch, and 8 inch sizes alongside welding screw clamps with heat resistant jaw pads for tack welding operations, since standard jaw pads deform under repeated contact with weld spatter and heat zones above 300 degrees Celsius. Bench screw clamps and parallel jaw clamps are also commonly stocked for precision fitting work where jaw parallelism affects alignment accuracy. Sahro Topline Glass Products Accessories (+966 56 450 8627) supplies a range of G Clamps and adjustable screw clamps through its Riyadh location on Al Madina Al Munawwarah Road.

Woodworking Screw Clamp and F Clamp – Furniture Manufacturer in Riyadh Requiring Long Reach Bar Clamps for Panel Assembly

A furniture manufacturer in Riyadh gluing solid wood panels up to 1,200 mm wide typically needs F Clamps rated bar length from 300 mm to 900 mm with protected jaw faces to avoid leaving compression marks on finished surfaces. Woodworking screw clamps at this scale are usually purchased in sets of 12 to 30 units to allow a full panel run to be clamped in one operation while adhesive cures. Toggle screw clamps for jig and fixture work at machining stations are also commonly sourced alongside F Clamps by furniture production operations. Al Tuwaijri Industrial Equipment Company (+966 11 446 6222) supplies a range of industrial clamps including workshop and woodworking types from its Old Industrial Area location in Riyadh.

Selection criteria: heat resistant jaw pads for welding operations, jaw opening range matched to workpiece thickness, bar length relative to panel width, protected jaw faces for woodworking to prevent surface marking, and clamp set quantity based on curing time and daily production volume.

Technical Specifications That Affect Your Screw Clamp Purchasing Decision

Specification	Why It Matters to Buyers
Material (MS, SS304, SS316)	Determines corrosion resistance, weight, and compliance with food, pharma, or offshore standards
Pipe Diameter / Jaw Opening	Must match the pipe or workpiece size exactly to achieve full contact and rated load transfer
Load Capacity	Should exceed the maximum static load by at least 20 percent; under-rated clamps are the most common cause of pipe support failure
Corrosion Resistance / Finish	Hot-dip galvanized for outdoor, electro-zinc for indoor dry, SS304 for washdown, SS316 for chlorinated or coastal environments
Thread Size	Affects tightening torque and compatibility with existing hardware on site; mismatched threads are a frequent site procurement error
Temperature Range	Alloy steel required above 120 degrees Celsius; standard carbon steel clamps soften and lose rated capacity near steam lines
Mounting Method	Affects installation speed and compatibility with threaded rods, beam flanges, or cast-in inserts at the installation point
Torque Rating	Required for documentation submissions on fire fighting and authority approved installations
Compliance Standards	NFPA 13 for fire fighting, ASTM or DIN grades for structural projects, food grade certification for pharma and food processing

What to Confirm Before Requesting a Quotation

• Pipe diameter or jaw opening required across all sizes on the project
• Material grade needed based on installation environment, temperature, and corrosion exposure
• Total quantity required, including whether bulk or wholesale pricing applies
• Load capacity required per clamp and whether a safety margin above working load is specified
• Compliance standard or certification required for the project type
• Delivery timeline and whether the supplier stocks locally or imports to order

Related Products on FYIND

Buyers sourcing screw clamps typically also need Pipe Clamps for fixed pipe support, Hose Clamps for flexible hose connections, and Beam Clamps for suspended pipe runs from structural steel.

Workshop and fabrication operations often combine screw clamps with F Clamps for long reach bar applications, Bench Clamps for fixed workstation holding, and Quick Grip Clamps where single handed operation is needed.

Electrical and infrastructure projects frequently pair screw clamps with Earthing Clamps for grounding connections, Pole Band Clamps for overhead cable support, Belt Clamps, Spring Clamps, Glass Clamps, and Strain Clamps for cable tension management.

Frequently Asked Questions