Saptex Pur Insulation Pipe 30 To 60 kg m3 1000 mm

Features

• SAPTEX  manufactures, rigid polyurethane foam  in a wide range of densities for different applications. Density 30 to 60 kg/m³ normally for pipe and duct insulation. Density 80 to 220 kg/m³ generally for ther-mal supports. APPLICATION: SAPTEX polyurethane foam is used in many different applications i.e. hot & cold wa-ter pipes, heating & air-conditioning ducts and industrial process pipework. PUR foam meets the requirements of national, regional and international standards/ specifica-tions. If higher performance level is required, Saptex can supply foam meeting most stringent properties. Where higher service temperatures and/or better fire perfor-mance is required, we recommend to use SAPTEX PIR pipe and duct insulation. SAPTEX PIR is a polyisocyanurate foam, which fulfills the highest fire ratings of rigid cellular foams. AVAILABILITY: SLABS PIPE SECTION PIPE FITTINGS including elbows, tees, valve covers, etc. BEVELLED SEGMENTS for Vessels, Tanks etc. DENSITY: 30 kg/m³, 40 kg/m³, 50 kg/m³ and 60 kg/m³ normally for pipes, fittings and slabs. 80 kg/m³, 100 kg/m³, 120 kg/m³ and above for thermal supports, or any other special application. SIZES:  Pipe sections and fittings of any outer diameter, with length 1000 mm. Pipe  sizes over 100 mm are made from segments. Slabs 1200 x 1000 mm, 1200 mm x 2000 mm or requested sizes. Polyurethane foam is vermin and rodent proof and inert to most chemicals.